GVDA KE2LR/KE2LG

Contents

GVDA KE2LR/KE2LG Cross-Line Laser Level User Manual

Automatic Self-Leveling 360 Degree Vertical & Horizontal Cross-Line Laser Leveler

1. Important Safety Information

Please read this manual thoroughly before operating the GVDA KE2LR/KE2LG Cross-Line Laser Level. Proper use ensures optimal performance and safety.

  • Do not operate the instrument in flammable or explosive environments.
  • Do not dispose of used batteries or the instrument with household waste. Follow national and local regulations for proper disposal.
  • If you encounter any quality issues or have questions regarding the use of this instrument, please contact your local dealer or the manufacturer for assistance.

2. Product Overview

The GVDA KE2LR/KE2LG is a compact and durable cross-line laser level designed for various leveling and alignment tasks. It projects bright horizontal and vertical laser lines.

GVDA KE2LG Laser Level (Green Beam)

Figure 1: GVDA KE2LG Cross-Line Laser Level

2.1 Instrument Components

Laser Level Components Diagram

Figure 2: Key components of the laser level

  1. Operation Button
  2. Laser Emission Window
  3. Lock Switch (Power/Mode Selector)
  4. Battery Compartment
  5. 1/4-inch Mounting Thread (for tripod/bracket)

2.2 Key Features

  • Automatic Self-Leveling (within ±4°)
  • Manual/Locked Mode for angled projection
  • High Visibility Red (KE2LR) or Green (KE2LG) Laser Lines
  • Compact and Portable Design
  • IP54 Water, Dust, and Shock Resistant
  • Magnetic Bracket Compatibility

3. Setup

3.1 Battery Installation

The GVDA laser level operates on two (2) AA 1.5V batteries.

  1. Locate and open the battery compartment cover on the back of the instrument.
  2. Insert two AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
  3. Close the battery compartment cover securely.

Note: If the laser light dims during operation, the batteries are low and need replacement. If the laser does not emit light, check the battery polarity.

3.2 Mounting the Instrument

The instrument features a 1/4-inch mounting thread at its base, allowing it to be attached to a tripod or a magnetic bracket for versatile positioning.

Laser Level with Magnetic Bracket

Figure 3: Laser level attached to a magnetic bracket

4. Operating Modes

Before operating, ensure the lock switch is in the correct position. Always keep the lock switch in the 'OFF' (locked) position when moving or storing the laser level to protect the internal pendulum.

4.1 Self-Leveling Mode

  1. Place the laser level on a stable surface.
  2. Slide the Lock Switch to the 'ON' (unlocked) position.
  3. The vertical and horizontal laser beams will light up, and the instrument will automatically self-level.
  4. The self-leveling range is approximately ±4°. If the instrument is tilted beyond this range, the laser lines will flash to indicate it is out of level. Adjust the instrument's position until the lines stop flashing.

4.2 Locked Mode (Manual/Tilt Mode)

This mode allows you to project laser lines at any desired angle, bypassing the self-leveling function.

Laser Level in Locked Mode on Tripod

Figure 4: Laser level operating in locked mode for angled projection

  1. Ensure the Lock Switch is in the 'OFF' (locked) position.
  2. Press and hold the Operation Button for 2 seconds.
  3. Both vertical and horizontal laser beams will light up, and a green indicator light will illuminate. The laser lines will now project at the angle the instrument is set.

4.3 Energy Saving Mode

The laser brightness can be adjusted to conserve battery life:

  • Upon powering on, the laser brightness is initially 60%.
  • Press the Operation Button once: Brightness increases to 100%.
  • Press the Operation Button a second time: Brightness reduces to 60%.
  • Press the Operation Button a third time: Brightness reduces to 35%.
  • Press the Operation Button a fourth time: Brightness returns to 60%.

4.4 Pulse Mode

Pulse mode is automatically activated when the instrument is in operation. This mode is typically used with a laser receiver for extended working distances or in bright conditions.

4.5 IP54 Protection

The GVDA laser level is designed with an IP54 rating, providing protection against dust ingress and water splashes from any direction. This makes it suitable for various job site conditions.

Laser Level Durability (Waterproof, Dustproof, Dropproof)

Figure 5: The laser level is designed to be waterproof, dustproof, and dropproof.

5. Maintenance

Proper maintenance ensures the longevity and accuracy of your laser level.

  • Accuracy Check: It is recommended to perform an accuracy check before the first use and periodically thereafter, especially for tasks requiring high precision.
  • Battery Care:
    • Do not short-circuit battery terminals, attempt to charge alkaline batteries, or dispose of batteries in fire.
    • Do not mix old and new batteries. Always replace all batteries at the same time with new ones of the same brand and type.
    • Keep batteries out of reach of children.
    • Remove batteries from the instrument if it will not be used for several months.
  • Storage: Avoid storing the laser level in direct sunlight or in environments with high temperatures. The plastic housing and internal components may deform under extreme heat.
  • Cleaning: Clean the exterior plastic parts with a damp cloth. While the materials are somewhat solvent-resistant, it is best to avoid using strong solvents. Use a soft, dry cloth to remove any moisture from the instrument before storage.
  • Disposal: Do not dispose of this product with household waste. Always dispose of batteries and the instrument according to local regulations.

6. Troubleshooting

Problem Possible Cause Solution
Laser does not turn on Batteries incorrectly installed or depleted. Check battery polarity; replace with fresh batteries.
Laser lines are dim Low battery power. Replace batteries.
Laser lines are flashing in self-leveling mode Instrument is outside its self-leveling range (>±4°). Adjust the instrument's position to be within its self-leveling range.
Laser lines are not straight Instrument is not properly calibrated or on an unstable surface. Perform an accuracy check. Ensure the instrument is on a stable, level surface.

7. Specifications

Feature Specification
Model Numbers KE2LR (Red Beam) / KE2LG (Green Beam)
Laser Type Vertical & Horizontal Cross-Line
Measurement Model 2 lines
Laser Wavelength KE2LR: 635±5nm / KE2LG: 505-530nm
Accuracy ±3mm/10m
Self-Leveling Range ±4°
Working Range 10m (Indoor), 30m (with Receiver)
Power Supply 2 x AA (1.5V) Batteries
Operating Temperature -10°C to 50°C
Storage Temperature -20°C to 70°C
Dimensions (L x W x H) 69.9 x 68.5 x 53.2mm
IP Rating IP54 (Waterproof, Dustproof)
Certification CE
Laser Level Dimensions (Mini Size)

Figure 6: Compact dimensions of the laser level

8. User Tips

  • For best results and stable measurements, always use a tripod or a stable mounting solution.
  • When using self-leveling mode, ensure the instrument is placed on a surface that is reasonably level to allow the pendulum to self-level efficiently.
  • For outdoor applications or in very bright indoor conditions, consider using a compatible laser receiver to detect the laser lines, as they may not be visible to the naked eye.
  • Always clean the laser emission window with a soft, lint-free cloth to ensure clear and bright laser lines.
Laser Level in Use (Tiling and Brickwork)

Figure 7: Examples of laser level applications in tiling and brickwork.

9. Warranty and Support

For any quality-related issues, questions about operation, or technical support, please contact your local GVDA dealer or the manufacturer directly. Please refer to the contact information provided with your purchase documentation.

An additional user manual in PDF format can be viewed or downloaded from the following link: GVDA KE2LR/KE2LG User Manual (PDF).

© 2024 GVDA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.