1. Introduction
Thank you for choosing the NITECORE NB10000 Gen4, an ultra-lightweight, competition-grade power bank designed for outdoor enthusiasts and daily use. This device features a 10,000mAh capacity, a durable carbon fiber shell, IPX7 waterproof rating, and dual USB-C ports with 22.5W fast charging capabilities. This manual provides essential information for the safe and efficient use of your power bank.
2. Package Contents
- NITECORE NB10000 Gen4 Power Bank
- Lanyard Charging Cable

Image: NITECORE NB10000 Gen4 Power Bank, lanyard charging cable.
3. Product Overview
The NB10000 Gen4 features a compact design with clearly labeled ports and indicators.
Port Layout

Image: Top view of the power bank showing the power button, USB-C IN/OUT1 port, and USB-C OUT2 port.
- Power Button: Activates power indicators and controls modes.
- USB-C IN/OUT1 Port: Used for charging the power bank and charging external devices.
- USB-C OUT2 Port: Used for charging external devices.
- RGB Positioning Lights: Dynamic lights on each port indicate port location, charging status, and output mode.
Internal Structure
The NB10000 Gen4 utilizes a self-developed composite anti-torsion structure with dual-sided carbon fiber sheets and a reinforced flame-retardant composite frame, ensuring durability and lightweight performance.

Image: Diagram illustrating the composite anti-torsion structure and internal components of the NB10000 Gen4.
4. Setup
Initial Charge
Before first use, it is recommended to fully charge your NITECORE NB10000 Gen4 power bank. Connect the lanyard charging cable or another USB-C cable to the USB-C IN/OUT1 port of the power bank and connect the other end to a suitable USB power adapter (not included).
5. Operating Instructions
Charging the Power Bank
Connect a USB-C cable to the USB-C IN/OUT1 port and a power source. The RGB lights will indicate the charging status.
Charging External Devices
Connect your device to either the USB-C IN/OUT1 port or the USB-C OUT2 port using a compatible USB-C cable. The power bank supports charging two devices simultaneously.

Image: Illustration of pass-through charging and charging two devices simultaneously using dual USB-C ports.
Power Level Indication
Briefly press the Power Button to activate the RGB positioning lights, which indicate the remaining power level.
Knock to Wake Function
In low-light conditions or when wearing gloves, double-knock the upper part of the power bank to effortlessly view the power indicators.
Mode Switching (Faster or Longer)
The NB10000 Gen4 features two output modes: Regular Mode and Eco Mode. Long press the Power Button to switch between these modes:
- Regular Mode: Rated Energy 6,800mAh (TYP 3A). Provides faster charging.
- Eco Mode: Rated Energy 7,200mAh (TYP 1A). Provides extended runtime for devices.

Image: Visual representation of Regular Mode and Eco Mode with their respective rated energies.
6. Maintenance
- Keep the power bank dry. Although it has an IPX7 rating, avoid intentional submersion.
- Clean the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid dropping or subjecting the power bank to severe impacts.
7. Troubleshooting
Device Not Charging from Power Bank
- Ensure the power bank has sufficient charge.
- Check that the charging cable is securely connected to both the power bank and your device.
- Try a different USB-C port on the power bank or a different charging cable.
Power Bank Not Charging
- Verify that the USB-C cable is properly connected to the power bank's IN/OUT1 port and the power source.
- Ensure the power source (e.g., wall adapter) is functional.
- Try a different USB-C cable or power adapter.
Safety Protections
The NB10000 Gen4 is equipped with multiple safety features, including:
- Overcurrent Protection
- Short-circuit Protection
- Over-Discharge Protection
- Overcharge Protection
- Overvoltage Protection
- Intelligent Thermal Protection
If the power bank stops functioning unexpectedly, these protections may have been activated. Disconnect all devices and cables, wait a few moments, and then try again.
8. Specifications
| Feature | Specification |
|---|---|
| Cell Type | Li-ion |
| Capacity | 10,000mAh 3.9V (39Wh) |
| Rated Energy | 6,800mAh 5V (TYP 3A) / 7,200mAh 5V (TYP 1A) |
| Input (USB-C IN) | 5V-3A / 9V-2.22A / 12V-1.87A (22.5W MAX) |
| Output (USB-C OUT1 / OUT2) | 5V-3A / 9V-2.22A / 12V-1.87A (22.5W MAX) |
| Total Output | 5V-3A (15W MAX) |
| IP Rating | IPX7 |
| Weight | 143g ±5g / 5 oz ±0.1 oz (Accessory Not Included) |
| Dimensions | 121.9mm x 59mm x 14.5mm / 4.57" x 1.84" x 0.57" |
| Operating Temperature | -10°C to 35°C (14°F to 95°F) |

Image: Technical data table for NITECORE NB10000 Gen4.
9. User Tips
- Portability: Users frequently praise the NB10000 Gen4 for its surprisingly small size and extremely lightweight design, making it ideal for travel and outdoor activities.
- Durability: The carbon fiber construction contributes to its robust and durable feel, suitable for demanding environments.
- Airline Travel: The NB10000 Gen4 complies with the UN38.3 standard, making it safe for air travel as a flight companion.
10. Warranty and Support
The NITECORE NB10000 Gen4 comes with an 18-month free warranty and a 15-day free replacement policy from the date of purchase. Please retain your proof of purchase for warranty claims.
For detailed information and further assistance, you may refer to the official user manual PDF available at: NITECORE NB10000 Gen4 User Manual (PDF).