TTNergy TTN-MAX 11000W

Contents

TTNergy TTN-MAX 11000W Solar Inverter User Manual

Model: TTN-MAX 11000W

Brand: TTNergy

1. Introduction

The TTNergy TTN-MAX 11000W is a multi-function inverter/charger designed to provide uninterruptible power support. It integrates the functions of a power inverter, solar charger, and battery charger into a compact unit. This hybrid inverter is suitable for various applications, especially in environments with unstable or absent grid electricity, by efficiently converting DC power from solar arrays into usable AC power and storing excess energy in batteries.

2. Safety Information

WARNING: Please read and understand all instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury.

  • Installation should only be performed by qualified personnel.
  • Ensure the inverter is properly grounded before connecting any power sources.
  • Do not attempt to disassemble, repair, or modify the unit. Refer all servicing to qualified service personnel.
  • Keep the inverter away from flammable materials, moisture, and direct sunlight.
  • Ensure adequate ventilation around the inverter to prevent overheating.
  • Always disconnect all power sources (PV, battery, AC input) before performing any maintenance or wiring.

3. Package Contents

Upon unpacking, please verify that all items are present and undamaged. If any items are missing or damaged, please contact your dealer immediately.

  • TTNergy TTN-MAX 11000W Solar Inverter
  • User Manual
  • Communication Cables (USB, RS232)
  • Parallel Communication Cable (if applicable)
  • Remote LCD Panel (optional, if included)
Inverter and accessories in packaging
Image: Contents of the TTNergy TTN-MAX 11000W Solar Inverter package.

4. Product Overview

4.1 Key Features

  • Pure Sine Wave output with power factor 1.0.
  • Parallel operation capability up to 6 units.
  • Max PV Input Power: 11000W (5500W x 2 trackers).
  • Built-in integrated MPPT module with 150A maximum solar charge current.
  • Battery independent design.
  • Built-in anti-dust kit for increased reliability.
  • Built-in WiFi for mobile monitoring (Android/iOS Apps available).
  • Supports USB On-the-Go function.
  • Lithium battery BMS support (compatible with Pylontech, Weco, Soltaro).
  • Replaceable fan design for ease of maintenance.
  • Batteryless operation (single unit mode only).
  • Configurable AC/PV Output Usage Timer and Prioritization.
  • Selectable high power charging current.
  • Selectable input voltage range for home appliances and personal computers.
  • Compatible with Utility Mains or generator input.
  • Optional DC output for DC fan, LED bulb, router, etc.
  • Detachable LCD remote display (optional).
  • High PV input design, 500V (Voc) max input.
Diagram highlighting key features of the TTNergy TTN-MAX inverter
Image: Key features of the TTNergy TTN-MAX inverter, including RGB light, communication ports, parallel connectors, anti-dust filter, and DC output.

4.2 Components and Ports

The inverter features various ports and connectors on its rear panel for system integration:

  1. Remote LCD Port: For connecting an optional detachable LCD remote display.
  2. Dry Contact (Genset Starter): For generator auto-start functionality.
  3. BMS Port: For communication with compatible Lithium Battery Management Systems.
  4. RS232 Port: For PC communication and monitoring.
  5. Battery Input: Connects to the battery bank.
  6. AC Output (Load): Connects to your AC loads/appliances.
  7. AC Input: Connects to the utility grid or a generator.
  8. PV Input: Connects to the solar panel array.
Back panel of the TTNergy TTN-MAX inverter with labeled ports
Image: Rear panel connections and ports of the TTNergy TTN-MAX inverter.

4.3 LCD Display and Indicators

The front panel features an LCD display and various indicators for monitoring and control:

  1. LED Display: Shows system status, operational parameters, and error codes.
  2. Status Indicator: Indicates the current operating status of the inverter.
  3. Charging Indicator: Shows the battery charging status.
  4. Fault Indicator: Illuminates when a system fault occurs.
  5. Function Buttons: Used for navigating menus and configuring settings.
  6. Power On/Off Switch: Main power control for the inverter.
LCD display and indicators of the TTNergy TTN-MAX inverter
Image: Front panel LCD display, indicators, and control buttons.

LED Indicator Messages:

LED IndicatorColorSolid/FlashingMessages
Setting LED 1GreenSolid OnOutput powered by utility
Setting LED 2GreenSolid OnOutput powered by PV
Setting LED 3GreenSolid OnOutput powered by battery
Status indicators (AC)GreenSolid OnOutput is available in line mode
Status indicators (INV)GreenFlashingOutput is powered by battery in battery mode
Status indicators (CHG)GreenSolid OnBattery is fully charged
Status indicators (CHG)GreenFlashingBattery is charging.

5. Setup and Installation

Proper installation is critical for the safe and efficient operation of your TTNergy TTN-MAX inverter. It is highly recommended that installation be performed by a certified electrician or solar professional.

5.1 System Connection

The inverter integrates various power sources to provide electricity to your home appliances. The general system connection involves:

  • Solar Power: Connect your PV array to the PV input terminals.
  • Utility Grid: Connect the AC input to your main utility power supply.
  • Generator: An optional generator can be connected to the AC input for backup power.
  • Battery Packs: Connect your battery bank to the battery input terminals.
  • Home Appliances: Connect your loads to the AC output terminals.
System connection diagram for the TTNergy TTN-MAX solar inverter
Image: General system connection diagram showing solar, generator, utility grid, battery, and load connections.

5.2 Parallel Connection

The TTN-MAX inverter supports parallel operation for increased power output and redundancy, allowing up to 6 units to work together. Detailed wiring for both power and communication connections is essential for correct setup.

Parallel power and communication wiring diagrams for multiple TTNergy TTN-MAX inverters
Image: Parallel connection diagrams for 2 to 6 inverters, detailing power and communication wiring.
Parallel connection diagrams for different phase configurations of TTNergy TTN-MAX inverters
Image: Parallel connection diagrams for various phase configurations (e.g., two inverters in each phase, three in one phase).

6. Operating Instructions

6.1 Basic Operation

To power on the inverter, ensure all connections are secure and then press the Power On/Off switch. The LCD display will illuminate, showing the current system status. Use the function buttons to navigate through the display menus and adjust settings such as AC/PV output priority, battery charging current, and acceptable input voltage range.

6.2 Monitoring

The TTN-MAX inverter features built-in WiFi for convenient mobile monitoring. Download the dedicated Android or iOS application to remotely check system performance, battery status, and energy flow. The USB On-the-Go function also allows for direct data access.

Video: Overview of the TTNergy Solar Inverter, highlighting key features like parallel operation, MPPT controller, and mobile monitoring.

7. Maintenance

To ensure the longevity and optimal performance of your TTN-MAX inverter, regular maintenance is recommended:

  • Fan Replacement: The inverter features a replaceable fan design for ease of maintenance. Refer to the detailed service manual for instructions on fan replacement.
  • Dust Control: The built-in anti-dust kit helps protect internal components. Periodically inspect the unit for dust accumulation and clean as necessary to maintain proper airflow and cooling.
  • Connection Checks: Regularly inspect all wiring connections for tightness and signs of corrosion.
  • Environmental Conditions: Ensure the inverter is operating within its specified temperature and humidity ranges.

8. Troubleshooting

If the inverter is not functioning as expected, consider the following basic troubleshooting steps:

  • No Power: Check all power connections (PV, battery, AC input) and ensure the power switch is on. Verify battery voltage.
  • Fault Indicator On: Check the LCD display for specific error codes. Refer to the full manual's troubleshooting section for detailed explanations of fault codes and corrective actions.
  • No AC Output: Verify that the loads are properly connected and not exceeding the inverter's capacity. Check for any tripped circuit breakers.
  • Poor Performance: Ensure solar panels are clean and unobstructed. Check battery health and charge level.

For complex issues, it is recommended to contact TTNergy customer support or a qualified technician.

9. Specifications

Technical specifications for the TTNergy TTN-MAX 11000W Solar Inverter:

FeatureSpecification (TTN-Max 11000)
Capacity11000VA/11000W
Parallel OperationYes, up to 6 units
INPUT
Selectable Voltage Range230 VAC
Frequency Range170-280 VAC (For Personal Computers); 90-280 VAC (For Home Appliances)
OUTPUT
AC Voltage Regulation (Batt. Mode)230 VAC ± 5%
Surge Power22000VA
Efficiency (Peak)90%~93%
Transfer Time15ms (For Personal Computers) / 20ms (For Home Appliances)
WaveformPure sine wave
No Load Power Consumption<70W
BATTERY
Battery Voltage48 VDC
Floating Charge Voltage54 VDC
Overcharge Protection66 VDC
SOLAR CHARGER & AC CHARGER
Solar Charger typeMPPT
Max. PV Array Open Circuit Voltage500VDC
MPP Range @operating Voltage90~450VDC
Max. PV Array Power11000W (5500W×2)
Max. Solar Charge Current150 A
Max. AC Charge Current150 A
Max. Charge Current150 A
PHYSICAL
Dimension, DxWxH (mm)147.4×432.5×553.6
Net Weight (kgs)18.4
Communication InterfaceUSB/RS232/RS485/WiFi/Dry-contact
ENVIRONMENT
Humidity5% to 95% Relative Humidity (Non-condensing)
Operating Temperature-10°C to 50°C
Storage Temperature-15°C to 60°C

10. User Tips

Properly matching the battery capacity of your system to your specific load requirements and application scenarios is crucial for optimal performance. An incorrectly sized battery bank can lead to insufficient power during peak demand or excessive waste of generated power. Always refer to the detailed recommendations in the full product manual or consult with TTNergy customer service for guidance on battery sizing and system configuration.

11. Warranty and Support

The TTNergy TTN-MAX 11000W Solar Inverter comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For technical support, warranty claims, or any questions regarding the installation and operation of your inverter, please contact TTNergy customer service. Ensure you have your product model and serial number available when contacting support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.