Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your INSE N8 Cordless Stick Vacuum Cleaner. Please read it carefully before first use and keep it for future reference.

INSE N8 Cordless Stick Vacuum Cleaner (Gold variant) with included accessories.
Safety Instructions & Warnings
WARNING: To reduce the risks of fire, electric shock, and injury, always follow basic precautions.
- This vacuum cleaner is for household use only. Do not use it for commercial cleaning or other purposes.
- Before connecting to the power supply, ensure the local voltage matches the voltage indicated on the power adapter.
- If the product or power adapter is damaged, discontinue use.
- Use the product strictly according to this manual. Maintenance should only be performed by authorized personnel.
- Keep this product away from children and do not allow them to use it as a toy.
- Keep the vacuum cleaner away from fire and other hot places.
- Do not use or store the machine under extreme temperatures. Recommended ambient temperature for use is 5°C to 40°C. Store in a cool, dry place away from direct sunlight.
- Fully charge the battery before first use or after long storage.
- Do not touch the plug or any part of the product with wet hands.
- If the power supply cord is damaged, it must be replaced by a professional to prevent danger. Unauthorized dismantling or replacement of parts may cause electric shock or fire.
- Use only the original power adapter and battery. Using other battery types may burst, causing personal injury or product damage.
- If the product malfunctions, has been severely impacted, dropped, or exposed to water, do not use it and contact after-sales service.
- Only specified replacements and parts can be used.
- Do not use the power adapter cable or plug if damaged.
- Do not use this product to suction water, flammable or explosive liquids (e.g., gasoline), or in areas where such vapors may exist.
- Do not suction burning or smoking objects (e.g., cigarette butts, matches, hot ashes).
- Do not insert anything into product gaps. Ensure air channels are not sealed. Remove any dust, cotton wool, hair, or anything that could hinder airflow.
- Ensure the dust cup and filter are installed before use.
- Disconnect power or unplug the machine during repair, cleaning, maintenance, or filter replacement.
- Exercise special care when cleaning stairs.
- Do not install, charge, or use this product outdoors, in the bathroom, or within 3 meters (10 feet) of a swimming pool. Do not use it on wet surfaces, and keep it free from moisture, rain, and snow.
- Clean the vacuum cleaner with a dry cloth. Do not use gasoline, alcohol, or banana oil, as it may crack or fade the shell.
- For long-term storage, ensure sufficient battery power and charge/discharge at least once every three months.
- Fire hazard warning: Do not place this product on or near high-temperature surfaces, and do not incinerate it. The battery may catch fire or explode.
- Fire hazard warning: Do not apply any fragrance product to the filter, as chemicals in such products can be flammable and cause fire.
Package Contents
Before assembly, please verify that all components are present and in good condition.

INSE N8 Cordless Stick Vacuum Cleaner (Blue variant) and its included accessories.
- Main Motor x1
- Retractable Metal Tube x1
- Adapter x1
- 2-in-1 Brush x1
- Motorized Brush x1
- 2-in-1 Cleaning Gadget x1
- Wall Mount x1
- Filter x1
- User Manual x1
- Quick-start Guide x1
Note: Accessories may vary slightly between different versions due to continuous product optimization.
Product Overview

Detailed view of the INSE N8 Cordless Stick Vacuum Cleaner components.
- Handle: Ergonomic grip for comfortable use.
- Battery Indicator Lights: Shows current battery level.
- Speed Mode Indicator Light: Indicates current suction mode.
- ON/OFF Switch: Powers the vacuum on or off.
- Speed Button: Toggles between standard and MAX suction modes.
- Battery Pack: Provides power to the vacuum.
- Dust Cup: Collects dust and debris.
- Dust Cup Release Button: For emptying the dust cup.
- Metal Tube Release Button: For detaching the metal tube.
- Retractable Metal Tube: Extends for floor cleaning, retracts for handheld use or hard-to-reach areas.
- Metal Tube Adjustment Button: Adjusts the length of the metal tube.
- Motorized Brush Release Button: For detaching the motorized brush.
- Motorized Brush LED Lights: Illuminates the cleaning path.
Specifications
| Attribute | Value |
|---|---|
| Product Name | Cordless Stick Vacuum Cleaner |
| Model | N8 |
| Rated Voltage | 22.2V |
| Power Adapter Input | 100-240V~ 50-60HZ |
| Power Adapter Output | DC 27V 0.5A |
| Input Current | 0.5A |
| Product Net Weight | 4.8lbs (approx. 2.18 kg) |
| Product Package Weight | 6.2lbs (approx. 2.81 kg) |
| Product Weight Range | 3-6 kg |
| Number of Nozzles | 1-3 nozzles |
| Number of Operating Modes | 1-2 |
| Battery Type | Li-ion (6*2200 mAh) |
| Liquid Tank Volume | <3L |
| Dust Box Capacity | 0.5 L |
| Filter Type | HEPA |
| LCD | No |
| Cleaning Route | Random Type |
| Bag Or Bagless | Bagless |
| Cord Length | Wireless |
| Timing Reservation | No |
| Special Suction Nozzle | Flat Suction Nozzle |
| Dust Storage Type | Dust Box/Dust Bucket |
| Installation | Hand Held |
| Certification | CE |
| Power | 180W |
| Function | Dry |
| Origin | Mainland China |
| Remote Control | No |
| Battery Life | 40 minutes |
| Vacuum Degree | 25 Kpa |

The INSE N8 provides powerful 25KPA suction for effective cleaning.

Battery specifications and charging time for the INSE N8.
Assembly
Follow these steps to assemble your INSE N8 Cordless Stick Vacuum Cleaner. Ensure a tight connection for each part, indicated by a 'click' sound.
- Attach the metal tube to the main motor until it clicks into place.
- Connect the motorized brush to the other end of the metal tube until it clicks.
- Alternatively, attach accessories like the 2-in-1 brush directly to the main motor for handheld use.
To disassemble, press the release button on each part.

Visual guide for assembling the INSE N8 vacuum cleaner.
Charging
It is crucial to fully charge the vacuum cleaner before its first use, as it is delivered with a partial charge for safety.
- Always use the original charger provided. Using other chargers may cause battery failure or extreme thermal effects.
- A full charge typically takes about 4-5 hours.
- The vacuum cannot be turned on while charging for safety.
Charging Methods:
You can charge the vacuum in two ways:
- Method 1 (Direct Charging): Plug the adapter directly into the charging port on the main motor.
- Method 2 (Charging Base): Place the main motor onto the charging base (if included) and connect the adapter to the base.
During charging, the blue battery indicator light will continuously blink. When all three blue battery indicator lights become steady, the device is fully charged.

Two methods for charging your INSE N8 vacuum cleaner.
Operating Instructions
Once assembled and charged, your cordless vacuum is ready for use.
Turning ON/OFF:
- Press the ON/OFF switch once to start vacuum-cleaning in standard mode.
- Press the ON/OFF switch again to stop vacuum-cleaning.
Adjusting Speed Mode:
- When the vacuum is on, it defaults to standard mode.
- Press the speed button once to switch to MAX mode for stronger suction.
- Press the speed button again to switch back to standard mode.

The INSE N8 offers powerful suction for various cleaning tasks.

The motorized brush head is suitable for multi-surface cleaning, including tile, hardwood, and low-pile carpet.

The flexible LED brush head illuminates dark areas and maneuvers easily around furniture and edges.
Demonstration video showcasing the INSE N8's features, including self-standing, powerful suction, LED brush head, and various attachments for different cleaning tasks.
Storage
The INSE N8 offers convenient storage options to save space.
Wall Bracket Installation:
- Attach the wall bracket to the wall in the desired position.
- Insert screws into the plastic case.
- Punch 2 holes in the wall at the marked positions.
- Nail the wall bracket to the wall with screws.
Storage Methods:
- Wall Mount Storage: Hang the vacuum on the installed wall bracket.
- Self-Standing: The vacuum is designed to stand upright on its own, allowing you to pause cleaning without leaning it against a wall.

Instructions for wall-mount installation and visual examples of wall-mount and self-standing storage.
Maintenance and Cleaning
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.
Dust Cup Cleaning:
- Clean the dust cup when the '-MAX-' line is approached.
- Turn off the machine, then press the dust cup release button to empty it.
Filter Cleaning:
IMPORTANT: Check and clean the high-efficiency strainer & filter regularly. If suction performance declines, replace the filter.
- Hold the main motor, press the dust cup release button to open the dust cup cover.
- Rotate the strainer and take out the filter.
- If the high-efficiency strainer and filter are too dirty, wash them with cold water.
- Ensure they are completely dry and properly installed before re-use, otherwise the motor may be damaged.

The 5-stage filtration system requires regular cleaning for optimal performance.
Motorized Brush Cleaning:
If the motorized brush is blocked, the machine will shut down, and the battery indicator lights will flash 9 times.
- Press the lock & unlock button on the brush head; the side cover will pop up automatically.
- Take out the roller brush.
- Use the 2-in-1 cleaning gadget to clean the roller brush and brush head area.
Troubleshooting
Refer to this table for common issues and their solutions. If the problem persists or is not listed, please contact customer support.
| Problem | Possible Cause | Possible Solution |
|---|---|---|
| Not working | Low Battery | Fully charge the battery |
| Roller tangled | Clean the roller brush | |
| Weak suction | Dust cup reaches max line | Empty the dust cup |
| Filter not installed properly | Reinstall the filter | |
| Roller tangled | Clean the roller brush | |
| Air duct blocked | Clean air duct | |
| Abnormal sound in motor | Dust cup reaches max line | Empty the dust cup |
| Filter not installed properly | Reinstall the filter | |
| Air duct blocked | Clean air duct | |
| Not charging | Plug isn't well connected | Reconnect the plug well |
| Not using original charger | Using original charger |
User Tips
- For optimal battery life, avoid completely draining the battery before recharging.
- Regularly check the brush head for tangled hair or debris, especially if suction seems reduced.
- The LED lights on the brush head are very useful for spotting dust in dimly lit areas or under furniture.
- Utilize the self-standing feature when taking short breaks during cleaning to prevent the vacuum from falling.
- The 2-in-1 cleaning gadget is effective for cleaning both the dust cup and the roller brush.
Warranty & Support
This product comes with a 12-month warranty and lifetime customer support. Warranty coverage applies to the original owner and product only and is not transferable.
How to Initiate a Warranty Claim:
If your appliance operates improperly under normal household conditions within the warranty period, please contact customer support via the following methods:
- Email: support@vacservice.vip
- Scan the QR Code below for direct support:

Scan this QR code to access customer support. (Note: Image is a placeholder for the actual QR code.)
Note: This warranty term gives you specific legal rights, and you may also have other rights which vary from state to state.
If the provided solutions in the troubleshooting section do not resolve your issue, or if your problem is not listed, please contact customer support. We are always ready to assist you.
A PDF version of the user manual may also be available for download at: User Manual (PDF)