1. Introduction
Thank you for choosing the E-ACE N 4K Mini 3 Driving Recorder. This device is designed to provide high-quality video recording of your journeys, offering features such as 4K Ultra HD resolution, WiFi connectivity, GPS tracking, night vision, and parking monitoring. This manual will guide you through the installation, operation, and troubleshooting of your new driving recorder to ensure optimal performance and safety.
2. Package Contents
Please check the box for the following items:
- 1 x Dashcam-B46P (Main Unit)
- 1 x Power Charger
- 1 x User Manual
- 1 x USB Card Reader (Gift)
- 1 x Electrostatic Sticker

3. Product Overview
3.1. Appearance and Button Function Description

The E-ACE N 4K Mini 3 Driving Recorder features a compact design with a 3-inch display. Key components and controls are:
- 1. Power (OK) button: Powers the device on/off, takes photos, and confirms selections in menus.
- 2. M (Menu/Mode) button: Switches between recording/shooting/playback modes and accesses the main menu.
- 3. Up button: Navigates up in menus, switches window displays during recording, turns WiFi on/off, and selects video playback options.
- 4. Down button: Navigates down in menus, locks video files during recording, and selects video playback options.
- 5. Input port (TYPE-C): For power input.
- 6. Rear camera port (AV): Connects the optional rear camera.
- 7. TF card slot: For inserting the memory card.
- 8. Reset button: Resets the device.
3.2. Core Components

The front camera utilizes a Sony IMX678PL image sensor with an F1.6 aperture and a 7-Element Glasslens, capturing Ultra 4K high-resolution footage with a 170° wide-angle view, including enhanced night vision capabilities.

The device is powered by a Hisilicon Chip, which ensures stable and reliable operation, preventing crashes and lagging even in complex environments.

A high-precision built-in GPS module supports GPS and Galileo BeiDou receiving signals, accurately recording vehicle location and speed data for enhanced reliability.
3.3. Product Dimensions

The main unit measures approximately 8.5cm in width and 5cm in height, featuring a 3-inch display.
4. Setup Guide
4.1. Preparation
- Turn off the car engine.
- Insert a high-speed TF card (Class 10 or above, minimum 32GB, maximum 256GB) into the card slot of the recorder.
4.2. Mounting the Dashcam
- Fix the recorder on the car windshield using the provided electrostatic sticker.
- Adjust the lens position to ensure that the lens is level with the ground for optimal recording angle.
4.3. Power Connection
There are two methods for powering the dashcam:
- Cigarette Lighter Power Supply: Insert the car charger into the car cigarette lighter. Use the charging extension cable to connect the USB port of the recorder to the car charger.
- Hardwire Kit Power Supply (Recommended, purchased separately): Open the fuse box and correctly connect the B+, ACC, and GND lines. This method is required for parking monitoring and time-lapse recording functions.
Note: When wiring, the charging extension cable can be laid along the edge of the car windshield for a neat installation.
4.4. Rear Camera Installation (Optional)
- Install the rear camera at the rear of the vehicle, paying attention to the direction. The wiring can be laid along the roof of the vehicle.
- After installation, connect the rear plug to the rear camera interface (AV port) of the recorder.
- Connect the rear camera's red cable wire to your car's reverse lamp positive pole (+). When your car is in Reverse Gear, the car DVR will automatically switch to the rear camera view with parking lines. If you do not need this auto-reversing function, you can ignore the red wire.

Warning: Due to variations in car models, professional assistance is recommended for installation. This method is for reference only.
4.5. Initial Check
- Start the car engine and check whether the machine has been installed correctly.
- When installed correctly, the system working indicator light will be on. When the machine starts to enter the recording state, the video indicator light will flash, indicating that the installation is complete.
5. Operating Instructions
5.1. Power On/Off and Recording
- Power On: In the off state, long press the [Power button] for 2 seconds to turn on the device.
- Power Off: In the on state, long press the [Power button] for 2 seconds. The device will automatically save the video file and user settings before shutting down.
- Automatic Recording: When the car engine starts, the recorder automatically powers on and begins recording. The charging indicator lights up, and the recording indicator flashes. When the car engine is turned off, the recorder automatically saves the recorded content and shuts down.
- Loop Recording: Recorded images are saved in segments on the TF card. When the TF card is full, the recorder will overwrite earlier recorded images. The recording time period can be set in the menu (1, 2, or 3 minutes).
5.2. Photo Function
- Take Photo: Short press the [Power button] to take a photo.
5.3. Collision Sensing (G-Sensor)
This unit has a built-in collision sensor (G-sensor). If a vehicle collision occurs, the recorder will automatically lock the current video footage as a special image, preventing it from being overwritten by loop recording. A lock icon will be displayed in the upper left corner of the screen.
Tip: The G-sensor sensitivity can be adjusted in the settings menu according to your needs.
5.4. Date and Time Setting
In standby mode, short press the [M key] to enter the system setting menu. Use the [Up key]/[Down key] to navigate to the date option, then short press the [Power button] to enter the time and date setting. Use the up and down keys to adjust values and the [M key] to switch between year, month, day, and time cursors.
Note: For accurate evidence recording, set the correct time before use. The recorder's time can also be automatically synchronized when connected to mobile phone WiFi.
5.5. One-Button Mute Function
In working state, long press the [Down button]. The microphone icon on the upper left of the screen will change to a disabled icon, indicating that audio recording is turned off. Long press the [Down button] again to restore audio recording. Settings are automatically saved.
5.6. Playback of Recorded Files
Press and hold the [M key] for 2-3 seconds to switch to playback mode. Use the [Up key]/[Down key] to find the desired file, then short press the [Power button] to play it. To exit playback mode, short press the [M key].
5.7. Parking Monitoring Function
Note: This function requires the ACC three-core Hardwire kit (optional package, purchased separately).
After connecting the recorder to the ACC power supply, you can enable parking monitoring in the menu interface. Options include Off, Low, Medium, and High. When enabled, if the car vibrates slightly while parked and turned off, the recorder will automatically start emergency recording. The gravity sensing function must also be turned on for this feature to work.
5.8. Time-Lapse Recording Function
Note: This function requires the ACC three-core Hardwire kit (optional package, purchased separately). This function will not appear if ACC is not turned on.
The time-lapse recording function offers four duration options: 12 hours, 24 hours, 48 hours, and 72 hours. The default setting is off. When turned on and the car is off with ACC disconnected, the recorder will prompt "Enter Time-lapse Recording" and begin. A red light in the lower right corner will flash. When the car starts, time-lapse recording exits, and normal recording resumes.
You can also select the time-lapse frame rate: 1 FPS, 2 FPS, or 5 FPS. For example, 1 FPS allows 30 minutes of video to be recorded in one minute of time-lapse footage.
5.9. GPS Function
The product has a built-in GPS function. Upon successful GPS positioning, a green GPS icon will appear on the video interface. You can access "Satellite information" in the menu to view longitude and latitude data.
Note: GPS positioning requires an open environment. Weak signal areas may cause temporary signal loss.
5.10. WiFi APP Connection (Viidure App)

This product connects to your smartphone via WiFi using the "Viidure" APP, available for both Android and iPhone.
- APP Download and Installation: Scan the QR code provided in the product packaging or search for "Viidure" in your device's app store (App Store for iPhone, Google Play for Android) to download and install the app.
- Connect to Dashcam WiFi: Power on the dashcam. Once it's ready, go to your phone's WiFi settings. Look for a WiFi network named "B46P-********" (e.g., "B46P-0F0D9040") and connect to it. The default WiFi password is "12345678".
- Access Camera View: Open the "Viidure" APP. Tap the "Access Camera" icon to view the live feed and access recorded videos.
- Video Playback and Settings: Within the app, you can play back recorded videos, access camera files, and adjust tachograph parameters.
Note for Android users: When connecting to the dashcam's WiFi, your phone may prompt "This WLAN network has no Internet access. Connect anyway." Be sure to click "Still connect" or similar prompts. Otherwise, the app may not function correctly or the screen may go black.
5.11. Saving Videos to Mobile Phone
Videos stored in the mobile app cannot be directly saved to your phone's album due to consumer privacy protection agreements. However, you can save them by following these steps:
- In the Viidure app, go to the "Replay" section.
- Select the video you wish to save and click the "Download" button.
- After successful download, click to enter and save the file to your phone's photo album (for Android) or camera roll (for iOS).
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the dashcam lens and screen. Avoid using abrasive cleaners or solvents.
- TF Card Management: Regularly format your TF card (at least once a month) to ensure optimal performance and prevent data corruption. Back up important videos before formatting.
- Firmware Updates: Check the manufacturer's website or app periodically for firmware updates to ensure your device has the latest features and bug fixes.
- Storage: When not in use for extended periods, store the dashcam in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
7.1. WiFi Connection Issues (Black Screen/Flash Back/Cannot Access APP)
A:
- Android Phones: If your phone alerts "This WLAN network has no Internet access. Connect anyway," ensure you select "Connect anyway." If you ignored it or chose not to use it, go to your phone's WiFi settings, "forget" the dashcam's WiFi network, then re-enter the password and select "Connect anyway" when prompted. Restarting your phone may also help.
- APP Permissions: If the problem persists, the app's permissions might be limited. Uninstall and re-download the "Viidure" app, then ensure all necessary permissions are granted during installation or in your phone's app settings. For iPhone users, specifically check if required permissions are turned off.
7.2. Memory Card Not Reading or Intermittent Recording
A: Ensure you are using a genuine, high-speed (Class 10 or above) TF card from a reputable brand (e.g., SanDisk, Toshiba, Kingston). Ultra HD recorders require high speed and stability from the memory card. Replacing the card with a suitable one should resolve the issue.
7.3. Recorder Flash Screen or Abnormal Switch Machine
A:
- Power Connection: Check if the power connector is plugged in properly and securely.
- Power Supply: Verify that the voltage and current of the power supply are sufficient and stable. Ultra HD recorders typically require a 5V/3A power supply. Unstable voltage or insufficient current can cause these issues.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | E-ACE |
| Item Type | Car DVR |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | HISILICON |
| Frames Per Second | 25 |
| Camera Resolution | 3840x2160 (4K Ultra HD) |
| Pixels | 1200Mega |
| Imaging Sensor | Sony CCD |
| View Angle | 170° |
| Aperture | F1.6 |
| Display Size | 3"-5" (3-inch screen) |
| Display Type | IPS |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| Screen Ratio | 16:9 |
| Video Code | H.264 |
| Max External Memory | 128G (Supports up to 256G TF card) |
| Memory Card Required Reading Speed | Class 10 |
| GPS logger | External (Built-in GPS module) |
| Power Source | Corded Electric |
| Cable Length | 6M |
| Is Batteries Included | Yes |
| Interface | HDMI, AV-In, Micro SD/TF |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Dutch, English, French, Italian, Japanese, Korean, Russian, Spanish, Ukrainian |
| Special Features | G-Sensor, Digital zoom, SD/MMC card, With Rearview Mirror, Radar Detector, Anti Surge Voltage Impact, Waterproof, Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi function, Parking Monitor, 3D DNR |
| APP Compatibility | YES |
| Loop-Cycle Recording Feature | Yes |
| Audio Recorded | Yes |
| NightShot Function | Yes |
| Rear Camera | Yes (Optional) |
| Original Package | Yes |
| Certification | CE, FCC, GMP, RoHS, pse, weee |
9. User Tips
- Optimal Recording: For best video quality, ensure the lens is clean and free from obstructions. Adjust the dashcam angle to capture the road clearly without excessive dashboard or sky.
- TF Card Health: Regularly back up important footage and format your TF card to maintain its performance and prevent recording errors. A full or corrupted card can lead to missed recordings.
- Parking Monitoring: If using the parking monitoring feature, ensure your dashcam is connected via a hardwire kit to prevent draining your car's battery. Adjust G-sensor sensitivity to avoid false triggers from minor bumps.
- GPS Accuracy: For accurate GPS data, ensure your vehicle is in an open area when the dashcam is powered on to allow for quick satellite acquisition.
- App Connectivity: If experiencing issues with the Viidure app, try restarting both your phone and the dashcam, and ensure your phone is connected to the dashcam's WiFi network before opening the app.
10. Warranty and Support
10.1. Warranty
This product comes with a 365-day warranty from the date of purchase.
10.2. Contact Information
For technical support, warranty claims, or any inquiries, please contact us:
- Website: www.e-ace.cn
- Email: fireking@e-ace.cn
- Phone: +86 0755-8464 4084
- Tel (WhatsApp): +86-18127083357
- Address: Floor 2nd, No.1 Yuanxia street, Pingshan District, Shenzhen City, Guangdong Province, 518000, China
You can also view the original user manual PDF here.