1. Introduction
These upgraded double-layer wiper blades are designed to provide optimal cleaning performance for your Mercedes Benz C-Class. Utilizing original factory technology for mold making, they ensure a simple and convenient replacement process and are specifically adapted for various C-Class models. The exclusive production technology enhances resistance to heat and ozone aging, offering up to 40% more durability compared to other aftermarket accessories. The patented design matches the original car's curvature, ensuring a 100% fit and superior performance even in extreme weather conditions. These wipers maintain firm adhesion at high speeds, preventing detachment and ensuring consistent accessory performance. They are suitable for both left-hand drive and right-hand drive vehicles.
2. Vehicle Compatibility and Wiper Sizes
To ensure proper fitment, please confirm your car model and the corresponding wiper blade sizes. Refer to the table below and the visual guide for arm types.
Figure 1: Vehicle Compatibility and Wiper Arm Types
| Car Model | Wiper Size (Driver & Passenger) |
|---|---|
| Mercedes Benz C-Class W203 (2000 - 2003) | 24" & 21" |
| Mercedes Benz C-Class W204 (2007 - 2012) | 24" & 24" |
| Mercedes Benz C-Class W204 (2013 - 2014) | 24" & 24" |
| Mercedes Benz C-Class W205 (2015 - 2019) | 22" & 22" |
Note: This product supports Pinch Tab Button (PTB) and Push Button Front Wiper Arm fittings. Please verify your vehicle's wiper arm type before installation.
3. Installation Instructions
Installation of these wiper blades is generally straightforward. Please follow these steps carefully. It is recommended to perform installation with the help of an adult and to pay attention to safety during the process.
- Remove Old Wiper Blade: Lift the wiper arm away from the windshield. Locate the release tab or button on the wiper blade connector. Press or slide the tab and slide the old wiper blade off the arm.
- Identify Correct Adapter: The new wiper blades come with various adapters. Select the adapter that matches your vehicle's wiper arm type (e.g., Pinch Tab Button or Push Button).
- Attach New Wiper Blade: Slide the new wiper blade onto the wiper arm connector until it clicks securely into place. Ensure it is firmly attached.
- Lower Wiper Arm: Gently lower the wiper arm back onto the windshield.
- Test Operation: Activate your vehicle's wipers to ensure they operate smoothly and clear the windshield effectively without streaking or noise.
Figure 2: General Wiper Blade Installation Steps (Pinch Tab Type)
Figure 3: General Wiper Blade Installation Steps (Push Button Type)
4. Maintenance
To prolong the life and effectiveness of your wiper blades, consider the following maintenance tips:
- Regularly clean the rubber edges of the wiper blades with a soft cloth and windshield washer fluid or mild soap and water. This removes dirt, grime, and road film that can cause streaking.
- Inspect the rubber for cracks, tears, or hardening. Replace blades if any damage is visible or if they start to streak or chatter.
- Ensure your windshield is clean before operating wipers, especially in dry conditions, to prevent unnecessary wear on the blades.
- Avoid using wipers to clear heavy ice or snow; use an ice scraper first.
5. Troubleshooting
- Streaking or Poor Wiping:
- Clean the wiper blades and windshield thoroughly.
- Check if the wiper blades are bent or damaged. If so, they may need replacement.
- Ensure the wiper blades are installed correctly and securely on the arm.
- Wiper Blades Not Fitting:
- Double-check the compatibility table and your vehicle's model year.
- Verify that you are using the correct adapter for your specific wiper arm type.
- Ensure the wiper arm itself is not damaged or worn, which could prevent proper fitment.
- Excessive Noise (Squeaking/Chattering):
- Clean the wiper blades and windshield.
- Ensure the wiper arm is not bent, causing uneven pressure on the blade.
- If the noise persists, the blades may be worn or defective and require replacement.
6. Specifications
| Feature | Detail |
|---|---|
| Placement | Front Windshield / Front Windscreen |
| Material | High Grade Natural Rubber |
| Wiper Type | Premium Beam, Flat Wiper Blades |
| Arm Type Compatibility | Pinch Tab Button (PTB), Push Button Front Wiper Arm Fitting |
| Special Function | Cleaning windshield, Clean Front Windshield |
| Item Height | 3 inch |
| Item Width | 2 inch |
| Item Weight | 0.32 kg |
| Origin | Mainland China |
| High-concerned chemical | None |
7. User Tips
- Many users report that these wipers fit perfectly and perform well, wiping cleanly and quietly.
- The double rubber strip design is noted for its effective wiping performance.
- Always double-check the specific model year and wiper arm type for your Mercedes Benz C-Class to ensure correct fitment.
- Upon receiving your order, inspect the blades for any signs of bending or damage from shipping, as this can affect performance.
8. Safety Information
- Please do not casually hit or collide with this product.
- This product contains small components and is prohibited for children under three years old to use.
- This product is an auto part; please use it with the help of adults. Pay attention to safety during use.
9. Frequently Asked Questions (FAQ)
- Q: Do these wipers work for right-hand drive vehicles?
- A: Yes, these new upgraded double-layer wipers are suitable for all models, including left-hand drive and right-hand drive vehicles.
10. Additional Documents
A detailed user manual in PDF format is available for further reference. You can access it via the following link: