1. Product Overview
The AHLTD Car Eagle Eye Strobe Light is a versatile LED lighting system designed for various automotive applications, including daytime running lights (DRL), emergency strobes, reverse lights, and brake signal lamps. It features a compact design, high waterproof performance, and multiple lighting modes controlled by a wireless remote.
Figure 1: Complete kit showing 4 LED lights, control box, and wireless remote control.
2. Package Contents
- 4 x LED Eagle Eye Lights with wiring
- 1 x Control Box (Model: SY-UCX)
- 1 x Wireless Remote Control
3. Setup and Installation
3.1 Wiring Diagram
The control box (SY-UCX) manages power distribution and lighting modes. Ensure all connections are secure and insulated.
- Input (IN): Connect the red wire to a +12V DC power source (e.g., car battery positive terminal or an accessory fuse). Connect the black wire to the vehicle's ground (-).
- Output (OUT): Connect the wires from the 4 LED Eagle Eye Lights to the output terminals of the control box. The control box supports up to 2x10A output.
3.2 Mounting the Lights
Each LED light unit is designed for easy installation:
- Clean the desired mounting surface thoroughly to ensure it is free of dust, grease, and moisture.
- Peel off the protective backing from the adhesive pad on the back of each LED light.
- Firmly press the LED light onto the prepared surface and hold for a few seconds to ensure good adhesion.
- Route the wiring neatly and securely to the control box, avoiding any moving parts or heat sources.
3.3 Control Box Placement
Mount the control box in a dry, secure location within the vehicle, away from direct heat or excessive moisture. Ensure the remote control has a clear line of sight or sufficient range to the control box.
4. Operating Instructions
The AHLTD Car Eagle Eye Strobe Light system is operated using the provided wireless remote control.
Figure 2: Available light colors: White, Yellow, Red, Blue, White/Yellow, Blue/Red.
4.1 Remote Control Functions
Figure 3: Wireless remote control with labeled buttons.
- ON/OFF Button: Press to turn the lights on or off.
- Flash Mode Change Button: Cycles through the 16 available flash patterns.
- Flash Cycle Mode Button: Activates a mode that automatically cycles through all flash patterns.
- Fixed Mode Button: Sets the lights to a steady (non-flashing) illumination.
4.2 Lighting Modes
The system offers 16 distinct flashing patterns and a steady illumination mode. The last selected pattern is typically remembered when the unit is powered off and on.
Video 1: Product demonstration showing various light colors and flash patterns.
5. Maintenance
The AHLTD Car Eagle Eye Strobe Light is designed for durability and minimal maintenance.
- Cleaning: Use a soft, damp cloth to clean the LED lenses and housing. Avoid abrasive cleaners or solvents that could damage the finish or lens.
- Waterproof Performance: The lights feature high waterproof performance, suitable for outdoor automotive use. However, avoid prolonged submersion or high-pressure water jets directly on the units.
Figure 4: Illustration of the product's high waterproof performance.
6. Troubleshooting
- Lights not turning on:
- Check all wiring connections to ensure they are secure and correctly polarized (+12V and ground).
- Verify the 12V DC power source is active.
- Check the remote control battery.
- Remote control not working:
- Ensure the remote control battery is not depleted or oxidized. Replace if necessary.
- Check for any obstructions between the remote and the control box.
- Ensure the control box is properly powered.
- Lights flickering or inconsistent operation:
- Inspect wiring for loose connections or damage.
- Ensure the input voltage is stable 12V DC.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | Car Eagle Eye Strobe Light |
| OEM Number | 11B949101 |
| Emitting Colors | Blue, White, Yellow, Red, Blue Red, White Yellow |
| Number of LED Lights | 4 (per kit) |
| Voltage | DC 12V |
| Lumens | 600LM |
| Wattage | 6W |
| Material | Aluminium Alloy Casing, Condenser Lens |
| Light Source Type | LED |
| Color Temperature | 6000K |
| Cable Length | 70 cm |
| Working Life | 50,000 hours |
| Flash Modes | 16 modes |
| Light Unit Size | 22mm (Diameter) x 24mm (Length) |
| Control Box Size | 48mm (L) x 34mm (W) x 22mm (H) |
| Remote Control Size | 60mm (L) x 38mm (W) |
| Item Weight | 130g |
Figure 5: Detailed view of light components: condenser lens, highlight wick, zinc alloy casing, and super glue paste.
8. User Tips
- If the remote control becomes unresponsive, first check its battery. Oxidation on battery contacts can prevent proper function; gently clean them if visible.
- For optimal light output and longevity, ensure the lights are mounted in a location that allows for some airflow, even though they are designed to be durable.
9. Warranty and Support
For any issues, questions, or support needs regarding your AHLTD Car Eagle Eye Strobe Light, please contact the seller directly through your purchase platform. Provide your order details for faster assistance.