1. Introduction
The NearStream AWM20T is a versatile 2.4GHz wireless microphone system designed for high-quality audio recording across various devices. It features a long transmission distance, advanced noise cancellation, and a user-friendly plug-and-play design, making it ideal for content creators, journalists, and anyone needing reliable wireless audio.

2. What's in the Box
Your NearStream AWM20T package includes the following items:
- 1x Fabric Bag
- 1x Charging Case
- 2x Transmitters (TX)
- 1x Receiver (RX)
- 1x 2-in-1 Charging Cable
- 2x Furry Windshields
- 1x Camera Audio Cable (3.5mm TRS to TRS)
- 1x Audio Cable (3.5mm TRS to TRRS)
- 1x C-to-C Connection Cable
- 1x Lightning Adapter

3. Setup Guide
The AWM20T system is designed for plug-and-play operation with automatic pairing. No Bluetooth or additional apps are required for basic functionality.
3.1 Initial Setup
- Charge the System: Ensure both transmitters (TX), the receiver (RX), and the charging case are fully charged using the provided 2-in-1 charging cable. The charging case has a 1300mAh capacity, providing multiple recharges.
- Power On: Remove the transmitters and receiver from the charging case. They will automatically power on and attempt to pair.
- Automatic Pairing: The transmitters and receiver are pre-paired at the factory. If re-pairing is needed, refer to the troubleshooting section or the full user manual.
3.2 Connecting to Devices
The AWM20T offers wide compatibility with various recording devices:

- To DSLR Camera: Use the 3.5mm TRS to TRS Camera Audio Cable. Connect one end to the receiver's output port and the other end to your DSLR camera's microphone input.
- To Smartphone/Tablet:
- For iPhone (Lightning port): Connect the Lightning Adapter to the receiver's output, then plug the adapter into your iPhone.
- For Android/USB-C devices: Use the C-to-C Connection Cable. Connect one end to the receiver's output and the other end to your smartphone/tablet's USB-C port.
- To Computer (PC/Mac): Use the 3.5mm TRS to TRRS Audio Cable. Connect the TRS end to the receiver's output and the TRRS end to your computer's combined headphone/microphone jack. If your computer has separate mic and headphone jacks, you may need an additional adapter (not included).

4. Operating Instructions
4.1 Power On/Off
The transmitters and receiver automatically power on when removed from the charging case and power off when placed back in the case.
4.2 Noise Cancellation
The AWM20T features one-click AI noise cancellation using ProperClean Technology to achieve clear audio recordings even in noisy environments.
- To activate noise cancellation, locate the dedicated noise cancellation button on the transmitter.
- Press the button once to toggle noise cancellation on or off. An indicator light on the transmitter will confirm the status.

4.3 Real-time Monitoring
The receiver unit includes a 3.5mm headphone jack for real-time audio monitoring. Plug in your headphones to listen to the audio being recorded, ensuring optimal sound quality.
4.4 Using Furry Windshields
For outdoor recording or in windy conditions, attach the provided furry windshields to the transmitters to minimize wind noise and improve audio clarity.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the microphone units and charging case. Avoid using liquids or abrasive cleaners.
- Storage: Store the system in its fabric bag and charging case when not in use to protect it from dust and damage.
- Battery Care: For optimal battery life, avoid fully discharging the units frequently. Recharge regularly.
6. Troubleshooting
- No Sound/Low Volume:
- Check all cable connections to ensure they are secure and correctly inserted.
- Verify the receiver is properly connected to your recording device's microphone input.
- Ensure the recording device's input volume is set appropriately.
- Confirm both transmitters and receiver are powered on and paired.
- Interference/Poor Audio Quality:
- Ensure the transmitters and receiver are within the specified 200m (656ft) transmission range.
- Avoid obstacles like thick walls or large metal objects between the transmitter and receiver.
- Activate the one-click noise cancellation feature in noisy environments.
- Use the furry windshields in windy conditions.
- Check for other 2.4GHz devices nearby that might cause interference.
- Not Pairing:
- Ensure both transmitters and receiver are fully charged.
- Power cycle both units by placing them back in the charging case and then removing them again.
- If issues persist, consult the full user manual for manual pairing instructions.
7. Specifications
| Feature | Specification |
|---|---|
| Model | AWM20T |
| Microphone Type | Lavalier Microphone |
| Transducer | Dynamic Microphone |
| Polar Pattern | Omnidirectional |
| Connectivity | Wireless |
| Wireless Transmission | 2.4GHz Adaptive Frequency Hopping (AFH) |
| Transmission Distance | 656ft (200m) |
| Frequency Range | 20Hz - 20KHz |
| Maximum SPL | 112dB SPL |
| Input Dynamic Range | 87dB |
| Transmitter (TX) Runtime | 7 hours |
| Receiver (RX) Runtime | 6 hours |
| Charging Case Battery | 1300mAh (provides multiple recharges for extended total usage) |
| Item Weight | 150g |
| Package Dimensions (L x W x H) | 11cm x 6cm x 15cm |
| Package Weight | 0.45kg |

8. User Tips
- Pre-charge for Events: Always ensure all units and the charging case are fully charged before important recording sessions to avoid interruptions.
- Monitor Audio: Utilize the real-time monitoring feature on the receiver to catch any audio issues (e.g., distortion, interference) during recording.
- Test Range: Before a critical shoot, test the wireless transmission range in your specific environment to understand its limitations and avoid signal drops. The video below demonstrates the impressive range.
- Use Windshields: Don't underestimate the effectiveness of the furry windshields. They significantly reduce unwanted wind noise in outdoor settings.
- Check Connections: Double-check all cable connections, especially when switching between different recording devices, to ensure proper audio routing.
9. Product Video Demonstrations
Watch the official product video for a visual guide on unboxing, noise cancellation tests, and wireless transmission distance tests.
The video showcases:
- Unboxing: A detailed look at all included accessories.
- AI Noise Cancelling Test: Demonstrations in a shopping mall and a busy street, highlighting the effectiveness of the noise cancellation feature.
- Wireless Transmission Distance Test: A test showing clear audio transmission at 10, 50, 100, and 200 meters.
10. Additional Resources
For a more detailed guide and further information, you can refer to the official user manual in PDF format: Download User Manual (PDF)
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official NearStream website or contact their customer service directly. Keep your proof of purchase for any warranty claims.