Introduction
Thank you for choosing the Xiaomi Portable Handheld Electric Fan. This manual provides detailed instructions for the safe and efficient use of your new device. Please read this manual carefully before operation and retain it for future reference.

The Xiaomi Portable Handheld Electric Fan, available in multiple colors.
Important Safety Warnings
Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product.
- Before use, inspect the product and power cord for any damage. Ensure they are in good condition.
- Do not disassemble, modify, or repair the product privately.
- Keep the product away from fire sources and high-temperature environments to prevent fire and explosion hazards.
- This product contains lithium batteries. Do not disassemble, impact, extrude, or throw into fire. If the battery shows severe bulging, discontinue use immediately.
- Do not use the battery after it has been immersed in water.
- Keep the product out of reach of children and pets.
- Do not insert fingers or hard objects into the air inlet/outlet to avoid injury from the internal fan blades or damage to the product.
- If any abnormalities occur during use, stop using the product immediately.
- When disposing of the product, separate lithium batteries from household waste for recycling to reduce pollution and protect the global environment.
Product Overview
Familiarize yourself with the components of your handheld fan:

The Xiaomi Handheld Fan highlighting key features.
Component Identification:
- Air Outlet: Where the airflow exits.
- Digital Display: Shows air volume/speed and power status.
- Power Switch: Controls overall power (slide up/down).
- Fan Button: Adjusts fan speed.
- Refrigeration Button: Activates/deactivates cooling function.
- Charging Port: Type-C port for charging.
- Lanyard Hole: For attaching a lanyard.
- Air Inlet: Where air is drawn into the fan.

Internal structure highlighting the brushless motor and cooling technology.
Initial Setup
- Unpacking: Carefully remove the fan and all accessories from the packaging.
- Initial Charge: Before first use, fully charge the fan. Connect the standard Type-C charging cable to the fan's charging port and a 5V/1A charger. Refer to the "Charging" section for indicator details.
- Power On: Slide the power switch upwards to turn on the fan. The digital display will show "--" and then turn off automatically after 20 seconds if no operation is performed.
Operating Instructions
1. Power Switch
- Turn On: Slide the power switch upwards. The display will show "--" and then turn off after 20 seconds of inactivity.
- Turn Off: Slide the power switch downwards to close all modes and power off the device.
2. Fan Speed Adjustment

Operating the fan speed with the digital display.
- Initial Fan On: Click the Fan Button once to activate the fan at 10 wind speed.
- Increase Speed: Click the Fan Button again to increase the wind speed by 1 gear.
- Rapid Adjustment: Long press the Fan Button to rapidly increase the gear up to 100 gears. The display will show the corresponding gear.
- Progression: Wind power increases gradually from 1 to 199 steps.
3. Refrigeration Function
- Activate Cooling: Click the Refrigeration Button to turn on the cooling function. The display will show a snowflake icon "lit up".
- Deactivate Cooling: Click the Refrigeration Button again to turn off the cooling function. The snowflake icon on the display will turn "off".
- Rapid Reduction: Long press the Refrigeration Button to rapidly reduce the gears to 1 stop. The display will show the corresponding gear.
- Note: The cooling function cannot be activated while the fan is charging. When charging, the fan's maximum adjustable gear is 20, and it can only be adjusted downwards, not upwards.
Charging the Fan
Use a 5V/1A charger and the provided Type-C cable for charging.

Digital display showing air volume and power status.
Charging Indicators:
- Charging: Green light flashes.
- Fully Charged: Green light is always on.
- Low Battery/False Power: Red light flashes.
- No Battery (forced on): Red light flashes for 3 seconds and then shuts down.
Maintenance
- Cleaning: Ensure the fan is powered off and unplugged before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or immerse the fan in water.
- Storage: Store the fan in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the fan regularly, even if not in active use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on/activate when powered on. | Low battery or not charged. | Ensure the fan is fully charged. Check charging indicators. |
| Fan button or other buttons are sticky/unresponsive. | Debris or manufacturing defect. | Gently clean around the buttons. If the issue persists, contact customer support. |
| Cooling function does not work. | Fan is charging. | The cooling function cannot be activated while the fan is charging. Unplug the fan to use cooling. |
| Fan makes unusual noise or vibrates excessively. | Obstruction in air inlet/outlet or internal damage. | Power off the fan and check for any obstructions. Do not attempt to disassemble. Contact customer support if the issue persists. |
Specifications
| Feature | Detail |
|---|---|
| Product Name | Handheld Fan |
| Product Model | H09 |
| Product Power | 12W |
| Fan Gear | 1-100 Gears (up to 199 steps) |
| Cooling Mode | 1 Gear |
| Product Net Weight | 256g |
| Battery Voltage | 3.7V |
| Input Current/Voltage | 5V/1A |
| Battery Capacity | 5200mAh |
| Operating Voltage/Current | 5V/2.8A |
| Product Size | 180x56x76MM |
| Product Material | ABS+Semiconductor Stainless steel Electronic components |
Package Contents:
- Handheld Fan x 1
- Type-C Charging Cable x 1
- User Manual x 1
- Lanyard x 1
User Tips
- The fan offers a wide range of wind speeds (1-199 steps). Experiment to find your preferred airflow for different situations.
- The powerful airflow can be useful for more than just personal cooling, such as quickly inflating small items or drying surfaces.
- Keep the fan charged to ensure it's ready for use, especially when planning outdoor activities.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Xiaomi website or contact your local distributor.
A detailed user manual in PDF format is available for download: User Manual (PDF).
Frequently Asked Questions (FAQ)
- Q: Can I use the fan while it's charging?
- A: Yes, you can use the fan while it's charging, but the cooling function cannot be activated simultaneously. Also, the maximum fan speed is limited to 20 gears when charging.
- Q: How do I know if the fan is fully charged?
- A: The green charging indicator light will be continuously on when the fan is fully charged. It flashes green during charging.
- Q: What type of charger should I use?
- A: Use a standard 5V/1A charger with the provided Type-C charging cable.