XIAOMI BPLDS05DM

Contents

XIAOMI MIJIA Smart DC Frequency Conversion Electric Floor Standing Fan

Model: BPLDS05DM / BPLDS02DM

XIAOMI MIJIA Smart Standing Fan, front view

The XIAOMI MIJIA Smart DC Frequency Conversion Electric Floor Standing Fan offers intelligent cooling with wireless operation and app support.

1. Safety Instructions

WARNINGS

Improper use may lead to electric shocks, fire, personal injury, or other damage. Please read this manual carefully before use, and retain it for future reference.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • Do not use this fan in a place where it will easily fall over or where there are other unstable objects nearby.
  • Do not use this fan in hot and humid environments such as a bathroom.
  • Do not use this fan if its power cord is damaged or its power plug is loose.
  • Do not use this fan if its front grille is not installed, or its rear grille is loose or fell off.
  • Do not allow children or adults who are incapable of operating this fan to use this product.
  • Do not attempt to disassemble or repair this fan by yourself.
  • Do not excessively pinch, bend, or twist the power cord to prevent from exposing or breaking its core.
  • Do not insert your fingers or any object into the front grille, rear grille, or the fan blades when the fan is in use.
  • Keep hair and fabrics away from the fan to avoid getting them caught in the fan.
  • Do not use any improper power outlet.
  • Do not use the power cord provided with this fan for any other device.
  • Make sure the fan is disconnected from the electrical outlet before removing the grille.

PRECAUTIONS

Installation

  • To avoid electric shocks, fire, personal injury, or other damage, please strictly follow the installation steps instructed in this manual, and make sure the fan base is assembled in the last step.
  • Do not connect the fan to the electrical outlet until it is fully assembled.

Transportation

  • Turn off and unplug the fan before moving it.
  • Firmly hold the fan stand to avoid it from falling down and causing personal injury.

Using the Fan

  • Immediately stop using the fan if it makes unusual sounds, gives off bad odors, overheats, or rotates irregularly.
  • Do not lean on or tilt the fan while it is running.
  • Do not shake the fan's head repeatedly so as to avoid damage to the internal mechanism.

Power Cord

  • Disconnect the fan from the electrical outlet before doing maintenance or moving it.
  • Always unplug the fan by pulling the power plug rather than the cord.
  • When the power cord is damaged, it must be replaced with a genuine one purchased from the manufacturer or after-sales service department.

2. Package Contents

Carefully unpack the box and ensure all items are present and in good condition. If any item is missing or damaged, contact your retailer.

Package contents of XIAOMI MIJIA Smart Standing Fan, showing fan, parts list, and adapter types

Image: Overview of the fan, its disassembled components, and various power adapter options (UK, AU, EU).

  • Motor & Upper Stand (1)
  • Fan Assembly (Front grille, fan blade assembly, rear grille) (2)
  • Lower Stand (3)
  • Base (4)
  • Fan Blade Assembly Knob (5)
  • Rear Grille Knob (6)
  • Hex Key (7)
  • Fan Grille Screw × 1 (8)
  • Power Cord (9)
  • User Manual (10)

Note: The adapter type (EU, UK, AU) is sent according to the plug type selected at purchase.

3. Setup and Installation

Product Overview

XIAOMI MIJIA Smart Standing Fan in a living room setting

Image: The fan positioned next to a sofa in a modern living space.

The fan features a control panel on top with indicators for Natural Breeze, Wi-Fi, Speed/Scheduled Turn-off, and buttons for On/Off, Speed Adjustment/Mode Switch, Oscillation, and Scheduled Turn-off.

Step 1: Install the Fan Base

The fan can be assembled in two modes: Standing Fan or Table Fan.

  1. Standing Fan Mode: Connect the motor & upper stand to the lower stand, then connect the lower stand to the base. You will hear a click when parts are successfully installed.
  2. Table Fan Mode: Connect the motor & upper stand directly to the base. You will hear a click when parts are successfully installed.

Note: Press the release button to remove the lower stand if needed.

Step 2: Open the Fan Assembly

  1. Turn the front grille counterclockwise until it separates from the rear grille.
  2. Remove the front and rear grille, then take out the fan blade assembly.

Step 3: Install the Rear Grille

  1. Install the rear grille onto the motor with the 'up' symbol facing upwards.
  2. Install and turn the rear grille knob clockwise to firmly fix the rear grille to the shaft of the motor.

Step 4: Install the Fan Blade Assembly

  1. Align the center hole of the fan blade assembly with the motor's shaft to install it into position.
  2. Install the fan blade assembly knob onto the motor's shaft.
  3. Turn the knob counter-clockwise to fix the fan blade assembly to the motor's shaft.

Step 5: Install the Front Grille

  1. Align the front grille alignment mark with the rear grille left alignment mark, ensuring the front grille is properly embedded into the rear grille.
  2. Turn the front grille clockwise until the front grille alignment mark aligns the rear grille right alignment mark.
  3. Ensure the grilles are securely fastened.

Step 6: Fasten the Front Grille

  1. Insert the fan grille screw into the hole at the bottom of the fan grille.
  2. Turn the screw clockwise using the included hex key to tighten it.

4. Operating Instructions

Connecting to an Electrical Outlet

Charging base connection for XIAOMI MIJIA Smart Standing Fan

Image: Close-up of the fan's base showing the magnetic charging port and the power adapter.

Connect the power cord to the power port on the base and then plug it into an electrical outlet. When you hear a beep, the fan is successfully connected to the power supply.

Turning On/Off

  • Turning On: Press the On/Off button to start the fan. When turned on for the first time, the default speed is slow (1) and the mode is direct breeze.
  • Turning Off: Press the On/Off button to stop the fan while it is running.

Switching Speed/Mode

  • Switching Speed: Press the Speed Adjustment/Mode Switch button to adjust the speed. The corresponding indicators will light up. Speeds include Slow (1), Medium (2), Fast (3), and Turbo (4). The fan remembers the last used speed.
  • Switching Mode: Press and hold the Speed Adjustment/Mode Switch button to switch between direct breeze and natural breeze. The indicator is off for direct breeze and on for natural breeze.

Enable/Disable Oscillation

Press the Oscillation button to enable or disable oscillation. You can set the oscillation angle range in the Mi Home app. The fan remembers the last oscillation setting.

Scheduled Turn-off

Press the Scheduled Turn-off button to cycle through scheduled turn-off times: 1 hour, 2 hours, 3 hours, 4 hours, and disabled. The corresponding indicator(s) will light up. For more options (up to 8 hours), use the Mi Home app.

Adjust the Airflow Direction

Gently lift or push down the fan's head or fan grille to adjust the airflow upwards (up to 23°) or downwards (up to 16°).

Connect with the Mi Home App

This product works with the Mi Home/Xiaomi Home app. Control your device, set oscillation angles, and access more features.

  1. Scan the QR code in the manual or search

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.