1. Foreword
Thank you for purchasing the TELESIN Magnetic Phone Camera Shoot Hand Grip. This manual provides essential information for the safe and effective use of your device.
Important Notes
- Before using this product, please read this manual carefully.
- Keep this manual properly. If other users need to use this product, please provide them with this manual.
- Pay attention to all warnings and follow all instructions in this user manual.
- Do not disassemble or damage this product. If the product is deformed or gets wet, stop using it immediately.
- Keep this product out of reach of children.
2. Product Overview
The TELESIN Magnetic Phone Camera Shoot Hand Grip transforms your smartphone into a more ergonomic and functional camera, offering physical controls for a better shooting experience.

Figure 2.1: TELESIN Magnetic Phone Camera Shoot Hand Grip in various configurations.
Package Contents

Figure 2.2: Package Contents
The package includes:
- 1 x Camera Grip
- 1 x Magnetic Ring
- 1 x Cleaning Kit
- 1 x Phone Lanyard
- 1 x Battery Removal Tool
- 1 x Instruction Manual
Component Diagram
Familiarize yourself with the parts of your TELESIN Magnetic Phone Camera Shoot Hand Grip:

Figure 2.3: Grip Controls
- Two-Stage Shutter Button:
- Hold 2s: Power on/off.
- Half-press: Focus.
- Click: Shoot/record.
- Two half-presses: Switch front/rear camera.
- Quick Zoom Lever: Quickly switch focal lengths (zoom in/out).
- DSLR-Style Mode Buttons (Mode 1/Mode 2):
- Press Mode1/Mode2: Toggle camera modes.
- Phone off, hold Mode1 2s: Wake screen.
- Indicator Light
- 1/4 Inch Thread Hole (for tripod mounting)
3. Setup
3.1 Initial Setup
- Remove Battery Tab: For first-time use, please remove the plastic battery tab from the remote control.
- Charge (if applicable): Ensure the device is charged if it uses a rechargeable battery (this model uses a CR1632 button cell, which is not rechargeable).
3.2 Attaching to Your Phone
The grip uses a strong magnetic connection. Compatibility varies based on your phone model and case:

Figure 3.1: Phone Attachment Guide
- For MagSafe Phone or MagSafe Case Users (iPhone 12 and newer): Attach the Magnetic Grip directly to your iPhone 12 (or newer) or a MagSafe-compatible case. The magnetic connection is stronger when used with a MagSafe case.
- For Non-MagSafe Phone or Non-MagSafe Case Users: Use the included Magnetic Ring.
- Stick the magnetizing ring on the back of a smooth phone case.
- Let it sit for 2 hours before using it to ensure strong adhesion.
- NOTE: Do not attach the magnetic ring directly to the back of the phone.
- WARNING: NEVER mount magnetic rings directly on phones.
3.3 Bluetooth Pairing
- Power On: Press and hold the Shutter Button for 2 seconds to turn on the grip. The indicator light will flash, indicating it's in Bluetooth pairing mode.
- Connect: On your smartphone, go to Bluetooth settings and select