Introduction
The RAVEMEN FR300 ANT+ is an intelligent bicycle front light designed for enhanced visibility and seamless integration with compatible cycling computers. Featuring ANT+ connectivity, multiple lighting modes, and an auto on/off function, it provides a safer and more convenient riding experience for cyclists.
Package Contents
Please check the box for the following items:
- 1 x RAVEMEN FR300 ANT+ Light
- 1 x USB-C Charging Cable
- 1 x USB-C to Micro USB Charging Cable
- 1 x User Manual
- 1 x Tether (pre-installed on the light)

Product Features
- Highly efficient COB LEDs with a maximum output of 300 lumens.
- Eye-catching warning flash mode for enhanced daytime visibility.
- Multiple brightness levels to suit various riding conditions.
- Automatic on/off mode for hands-free operation, conserving battery.
- Seamless integration with Garmin computers and mounts via ANT+ connectivity.
- Convenient USB-C charging port.
- USB-C discharging function, specifically for charging bike computers.
- IPX6 water-resistance rating for reliable performance in heavy rain.
- Mode memory function, recalling the last used lighting mode.
Setup
Mounting the FR300 ANT+
The FR300 ANT+ is designed to be fixed under your Garmin Flush out-front mount. This allows for a clean setup and saves space on your handlebars.

Use the tether (already installed) to secure the light or computer, especially for gravel or unpaved road riding, to prevent accidental dislodgement.
Initial Charging
Before first use, fully charge the FR300 ANT+ using the provided USB-C cable. Connect the USB-C end to the light and the other end to a compatible USB power source (5V, DC/1A).
- The charging indicator will show a blinking red light while charging.
- It will turn green when fully charged.
- Standard charging time is approximately 1 hour 40 minutes.
Always keep the charging port dry and clean to prevent corrosion or short circuits.
Operating Instructions
Power Button
- Press and hold the power button for 1.5 seconds to turn the light ON or OFF.
- Click the button to cycle through the available lighting modes.
Lighting Modes
The FR300 ANT+ offers various lighting modes for different riding conditions. The light remembers the last used mode when switched off.
| Mode | Brightness (lumens) | Run time (hrs) |
|---|---|---|
| High | 200 | 4 |
| Mid | 100 | 7.5 |
| Low | 50 | 14.5 |
| Warning Flashing | 300 | 9 |
| Rapid Flashing | 100 | 12.5 |
| Slow Flashing | 100 | 24 |
Battery Indicator
When the light is off, click the power button to activate the battery indicator without turning the light on:
- Green light: 40% - 100%
- Red light: 5% - 40%
- Blinking red light: 0% - 5% (Charge your light soon)
Pairing with ANT+ Devices
- Ensure the bike light is OFF. Press and hold the power button for 2.5 seconds until the light flashes slowly. The light will then enter pairing mode.
- Bring your display device (e.g., Garmin computer) close to the light and turn it on.
- On your display device, navigate to the settings page and select "Add Sensor" or "Search Sensor". (Refer to your device's manual for exact steps).
- In the search results, select "Light" to connect. If the light is not found, turn it off and repeat step 1.
- Once pairing is successful, the light will return to its previous mode.

Auto On/Off Mode
This mode helps conserve battery and provides hands-free operation.
- To activate: Turn on the light, then press and hold the power button for 5 seconds. The light will switch off, blink quickly 5 times, and then turn on again.
- To exit: Repeat the activation steps (the light will blink slowly 3 times during this process).
- In this mode, the light automatically switches off after 2 minutes of inactivity and turns back on with vibration.

Garmin Computer Control (Advanced)
When paired with Garmin Edge computers, the computer can control the headlight to sleep or turn on without manual operation. In the Sensor settings, you can choose to turn on the light when the computer is on or when the Start button is pressed. The response time for the light to enter sleep mode depends on the Edge models.
Compatibility Table
The following table details the compatibility and functions supported by various bike computer models. Please note that the availability of all functions depends on whether your bike computer itself supports them.
| Brand/Model | Functions | Notes |
|---|---|---|
| Garmin 530/540/840/1040/1050/EXPLORER 2 |
| Recommended: Update firmware to the latest version. |
| Bryton (RIDER S800/750 SE Pro) |
| Recommended: Update firmware to the latest version. Use the automatic on/off function of FR300 ANT+ itself. |
| Wahoo (ROAM V2/BOLT) |
| Recommended: Use the automatic on/off function of FR300 ANT+ itself. |
| Wahoo (ELEMNT ACE, Touchscreen) |
| |
| Hammerhead Karoo (Touchscreen) |
| Recommended: Use the automatic on/off function of FR300 ANT+ itself. |
| iGPSPORT (BSC200S/BSC300L/iGP800) | Recommended: Use the automatic on/off function of FR300 ANT+ itself. |
Maintenance
Charging Guidelines
- Only charge the FR300 ANT+ with compatible 5V, DC/1A USB-C chargers. Some fast chargers may not work due to different charging protocols. If charging issues occur, try a different charger or cable.
- DO NOT use the FR300 ANT+ to charge mobile phones or other devices, as this may damage the light and void the warranty.
- Ensure the charging port cap is securely mounted after charging to maintain water resistance.
- DO NOT charge or discharge the light when it rains, as the charging port is not water-resistant when connected.
Water Resistance
The FR300 ANT+ has an IPX6 water-resistance rating, making it suitable for riding in heavy rain. Always ensure the charging port cap is securely closed when not charging to maintain this protection.
General Care
- Keep the light clean and free from dirt and debris. Use a soft, damp cloth for cleaning.
- Avoid dropping the light from heights greater than 1 meter, as it has an impact resistance of 1 meter.
- Store the light in a cool, dry place when not in use.
Troubleshooting
Light not turning on/off
- Ensure the battery is charged. Check the battery indicator.
- Press and hold the power button for 1.5 seconds to ensure it's not just a quick click.
Light not pairing with computer
- Ensure the light is in pairing mode (slowly flashing after 2.5-second press).
- On your cycling computer, try 'Reset the pairing device' by holding the power button for 5 seconds until the light blinks quickly 5 times. This deletes paired devices and returns to the last used mode. Then attempt pairing again.
- If using a Garmin computer, ensure its firmware is updated to the latest version.
- If issues persist, remove the sensor from the computer and re-pair it.
Auto on/off not working as expected
- Ensure the auto on/off mode is activated correctly (light switches off, blinks 5 times, then on again during activation).
- The response time for sleep mode can vary by Garmin Edge model.
Charging issues
- Try a different USB-C charger or cable.
- Ensure the charging port is dry and clean.
Specifications
| Feature | Detail |
|---|---|
| LED | COB LED |
| Battery | 1200mAh/3.7V rechargeable Li-polymer battery |
| Dimensions (L x W x H) | 82mm x 60mm x 25.5mm |
| Weight | 75g |
| Water Resistance | IPX6 |
| Impact Resistance | 1 meter |
| Power Supply | Battery |
| Mounting Placement | Handlebar |
| Intelligent Sensing | Yes |
| Support Dimmer (Modes) | 5 - 8 Files (modes) |
| Body Material | Plastic |
| Certification | CE, FCC, RoHS |
| Standard Charging Time | 1 hour 40 minutes |
| Input | 5V, DC/1A |
| Output (for bike computers) | 5V, DC/1A |
Design and specifications are subject to change without notice.
Warranty & Support
Warranty Policy
- Product Warranty: Two years warranty for the product against defects in material and workmanship from the day of purchase under normal use.
- Accessories & Battery Warranty: One-year warranty for accessories and the internal battery.
- Lifetime Support: Limited lifetime warranty support is provided.
Warranty Exclusions
The warranty does not cover:
- Normal wear and tear and normal battery deterioration.
- Improper use and maintenance, unauthorized modifications or alterations.
- Absence of a valid sales receipt or proof of purchase.
Contact Support
For warranty service, technical support, or any questions regarding the FR300 ANT+, please contact the seller or email service@ravemen.com.
User Tips
- Firmware Updates: For optimal compatibility and full functionality, especially with Garmin computers, ensure your cycling computer's firmware is updated to the latest version.
- Visibility: The FR300 ANT+ is highly effective for increasing visibility, particularly in foggy, humid, or low-light conditions.
- Mounting: Utilize the stackable mounting option for a clean and integrated setup with your cycling computer.
- ANT+ Connection: Establishing the ANT+ connection is generally quick and straightforward.
Frequently Asked Questions (FAQ)
Q: Is the FR300 ANT+ compatible with Wahoo GPS devices?
A: The FR300 ANT+ does not have an adapter compatible with Wahoo devices. While some basic functions might work, full integration and control are not guaranteed. It is recommended to use the automatic on/off function of the FR300 ANT+ itself with Wahoo devices.
Q: Is the FR300 ANT+ compatible with Bryton devices?
A: Yes, the FR300 ANT+ is compatible with Bryton devices. For optimal performance, it is recommended to update your Bryton firmware to the latest version and utilize the automatic on/off function of the FR300 ANT+ itself.