DW DH171

Contents

DW DH171 Brushless High-Power Lithium-Ion Lightweight Electric Hammer & Pick User Manual

Model: DH171

1. Introduction

Thank you for choosing the DW DH171 Brushless High-Power Lithium-Ion Lightweight Electric Hammer & Pick. This product features a brushless motor design and high-performance lithium battery, offering both portability and powerful output. It supports switching between hammer drill and chisel modes, making it widely applicable for drilling and breaking operations on concrete, bricks, stone, wood, metal, and other materials. It is suitable for home decoration, construction, and DIY projects.

To ensure your safety, proper use, optimal performance, and extended service life, please read this manual carefully before operation. Strictly follow all safety warnings and operating procedures. Any equipment damage or personal injury resulting from failure to comply with these instructions is the sole responsibility of the user.

DW DH171 Multifunctional Lithium Electric Hammer
Figure 1: DW DH171 Multifunctional Lithium Electric Hammer

2. Safety Warnings

2.1 General Safety Warnings

  • Before operation, ensure you have received professional training, are familiar with the equipment structure and operating procedures. Untrained personnel are prohibited from using this equipment.
  • Always wear complete personal protective equipment (PPE) during operation, including insulated gloves, safety shoes, protective glasses, dust masks, and earplugs, to prevent dust and debris from harming eyes and respiratory tract, and to reduce noise impact on hearing (sound pressure level approx. 86dB(A), sound power level approx. 97dB(A)).
  • Do not use this equipment in flammable, explosive, wet, dusty, or strong electromagnetic interference environments. Wet environments can lead to electric leakage, and flammable/explosive environments can cause fire or explosion risks.
  • During operation, do not touch drill bits, chisels, or other rotating/moving parts to avoid scratches, crushing, or other personal injuries. Do not place body parts near the equipment's air outlet to prevent high-temperature burns.
  • Maintain a correct posture during operation, firmly grip the handle with both hands, and keep your body stable to prevent accidental release due to equipment vibration. Do not operate the equipment when fatigued, under the influence of alcohol, medication, or in poor mental condition.
  • If the equipment experiences abnormal heating, smoking, abnormal noise, increased vibration, or electric leakage during use, immediately turn off the power, remove the battery, stop using it, and contact professional after-sales personnel for inspection. Do not disassemble the equipment yourself.
  • Non-professional personnel are not allowed to disassemble, modify the equipment, or replace core components without authorization. Maintenance and repair must be performed by authorized personnel to avoid damaging the equipment or causing safety hazards.
  • Keep the equipment and accessories out of reach of children to prevent accidental injury. Store batteries separately, away from high temperatures, fire sources, and metal objects to prevent short circuits.

2.2 Battery Safety Warnings

  • This equipment can only use original specified lithium batteries. Do not use non-original, damaged, or incompatible battery models, as this may lead to battery leakage, explosion, or equipment damage.
  • Always use the original matching charger for charging. The charging environment must be well-ventilated and dry, with a temperature between 0-40℃. Avoid direct sunlight, high-temperature, or low-temperature charging. Do not touch the charger and battery during charging to prevent overheating burns.
  • If the battery shows abnormal heating, bulging, leakage, or other abnormalities after use, stop using it immediately. Place the battery in a safe and ventilated area. Do not squeeze, puncture, or throw it into fire. Contact after-sales service promptly.
  • When not using the equipment for a long time, fully charge the battery (to about 80% capacity), then remove it and store it in a dry, cool place. Recharge every 3 months to prevent battery over-discharge damage. Do not short-circuit the battery or mix it with metal objects.
  • Before replacing the battery, always turn off the equipment power and wait for the equipment to completely stop running to avoid electric shock or accidental startup.

3. Product Structure

Familiarize yourself with the components of your DW DH171 electric hammer for safe and effective operation.

Labeled diagram of DW DH171 electric hammer
Figure 2: Key Components of DW DH171

3.1 Core Component Identification

  1. Drill Bit/Chisel Holder: Used for installing and securing drill bits or chisels. Equipped with a quick-release mechanism for easy accessory replacement.
  2. Mode Selector Knob: Used to switch between hammer drill mode and chisel mode. Rotate the knob to align with the corresponding icon for selection.
  3. Power Switch/Variable Speed Trigger: Press the trigger to start the equipment. The pressing depth of the trigger adjusts the rotation speed and impact frequency. Releasing the trigger stops the equipment.
  4. Auxiliary Handle: Can be rotated 360° for operators to grip at various angles, enhancing operational stability and reducing vibration impact.
  5. Battery Slot: Located at the bottom of the main body, used for installing the lithium battery. Equipped with a locking device to ensure secure battery installation.
  6. Battery Release Button: Press this button to unlock the battery, making it easy to remove for charging or replacement.
  7. Air Vents: For equipment heat dissipation, ensuring good ventilation during operation and preventing internal overheating damage to the motor.
  8. Power Indicator Lights: Located on the side of the main body, display the remaining battery power for timely charging.
One Key Reverse Turn button
Figure 3: One Key Reverse Turn - Tighten forward and loosen reverse
Non-slip comfortable handle
Figure 4: Non-slip Comfortable Handle - Ergonomic design for practical process and comfortable heavy use

4. Setup

4.1 Pre-Operation Preparation

  1. Inspect Equipment: Visually inspect the main body for damage or cracks, ensure the handle is not loose, and check that air vents are free of obstructions. Verify the drill bit/chisel holder is intact and the mode selector knob operates smoothly.
  2. Inspect Battery: Confirm the battery has no bulging, leakage, or damage, and that battery contacts are clean and free of stains or rust. Insert the battery correctly into the battery slot until you hear a “click” sound, indicating secure installation. Check the power indicator lights to ensure sufficient battery charge.
  3. Install Accessories: Select the appropriate drill bit (for drilling) or chisel (for breaking) according to job requirements. Insert the accessory into the holder, rotate clockwise to lock it securely, ensuring it will not fall off during operation.
  4. Adjust Auxiliary Handle: Rotate the auxiliary handle to a comfortable position based on the operating angle, then tighten the fixing screw to ensure stable grip.
  5. Select Working Mode: Use the mode selector knob to choose either hammer drill mode (for drilling) or chisel mode (for breaking). Confirm the knob points to the correct icon.
  6. Clear Work Area: Remove debris, flammable, and explosive materials from the work area. Ensure sufficient working space, no unauthorized personnel nearby, and set up safety warning signs.

4.2 Battery Charging Instructions

  1. Pre-Charge Inspection: Confirm the charger is free of damage or cracks, and the charging plug is clean and free of stains or rust. Confirm the battery has no bulging, leakage, or damage, and battery contacts are clean.
  2. Connect Charger: Insert the charger plug into a household AC power outlet (220V/50Hz). Confirm the charger indicator light turns on (usually red, indicating standby).
  3. Insert Battery: Correctly insert the battery to be charged into the charger slot. You will hear a “click” sound, indicating it is in place. The charger indicator light will turn orange, and charging will begin.
  4. Charging Process: During charging, the charger and battery may become slightly warm, which is normal. Charging time depends on battery capacity, typically 1-3 hours. Refer to the charger manual for specifics.
  5. Charging Complete: When the charger indicator light turns green, the battery is fully charged. At this point, remove the battery, turn off the charger power, and unplug it.
  6. Precautions: Do not use the equipment or move the charger/battery during charging. Do not overcharge (remove promptly after full charge). The charger must be used alone; avoid sharing power outlets with other appliances to prevent excessive current and damage to the charger.

5. Operating

5.1 Hammer Drill Mode (Drilling Operations)

  1. Align the drill bit with the drilling position, keep the drill bit perpendicular to the work surface, firmly grip the handle with both hands, and ensure body stability to prevent equipment deviation during operation.
  2. Slowly press the power switch/variable speed trigger to start the equipment. Adjust the trigger pressure according to operational needs to control rotation speed and impact frequency. Apply slight axial pressure during drilling; avoid excessive force, which can cause the drill bit to break or damage the equipment.
  3. Maintain equipment stability during drilling; avoid swaying left or right. If encountering hard obstacles, reduce speed and advance slowly; do not force drilling.
  4. After drilling is complete, release the trigger. Once the drill bit has completely stopped rotating, remove the drill bit from the hole to avoid scratching the work surface or injuring personnel.

5.2 Chisel Mode (Breaking Operations)

  1. Align the chisel with the part to be broken, keep the chisel perpendicular or at an appropriate angle to the work surface, firmly grip the handle with both hands, and ensure body stability and a safe distance from the equipment.
  2. Slowly press the power switch/variable speed trigger to start the equipment. Adjust the trigger pressure according to breaking needs to control impact frequency. Proceed gradually during breaking; avoid concentrating on one spot for too long to prevent chisel overheating or damage.
  3. During operation, promptly clear debris generated by breaking to prevent accumulation from affecting work efficiency or causing slippage.
  4. After breaking is complete, release the trigger. Once the chisel has completely stopped vibrating, move the chisel away from the work surface and turn off the power.
Multiple functions: Slotted wiring and Pavement breaking
Figure 5: Multiple Functions - Suitable for solid wall drilling (slotted wiring) and demolition of solid wall (pavement breaking)

5.3 Post-Operation Handling

  1. Turn off the equipment power, press the battery release button, and remove the battery. If the battery power is low, charge it promptly using the original charger.
  2. Remove the drill bit/chisel, clean dust and debris from the accessories, and inspect them for wear or deformation. Replace damaged accessories promptly.
  3. Wipe the surface of the main body with a dry cloth, clean dust from the air vents, ensuring the equipment surface is clean and dry. Check if body screws are loose and tighten them if necessary.
  4. Organize the equipment, battery, accessories, and charger. Store them in a dry, cool, and ventilated place, away from high temperatures, fire sources, and humid environments, and avoid direct sunlight.

6. Maintenance

6.1 Daily Maintenance (After Each Use)

  • Cleaning: Wipe the surface of the main body, handle, battery contacts, and air vents with a dry cloth. Clean dust and debris from the drill bit/chisel to prevent dust from entering the equipment and damaging the motor.
  • Inspection: Check the drill bit/chisel for wear, deformation, or breakage. Replace damaged parts promptly. Check if body screws are loose, if the auxiliary handle is secure, and if the mode selector knob operates smoothly.
  • Battery Maintenance: Remove the battery and check if battery contacts are clean. If stained, wipe with a dry cloth. Keep the battery dry during storage to prevent over-discharge or overcharge.

6.2 Regular Maintenance (Every 50 Hours of Use)

  • Lubrication: Apply a small amount of special grease to the drill bit/chisel holder to ensure smooth accessory installation and removal, reducing wear. Do not use excessive grease to avoid contaminating the work surface.
  • Motor Inspection: Check if the motor air vents are clear. Clean internal dust (using compressed air if available) to ensure good motor heat dissipation. If the motor makes abnormal noises or overheats, contact after-sales service promptly.
  • Switch and Trigger Inspection: Check if the power switch and variable speed trigger operate smoothly and return to their original position normally after pressing. If there is any sticking or malfunction, repair or replace promptly.

6.3 Long-Term Storage Maintenance (If Not Used for More Than 1 Month)

  • Battery Handling: Fully charge the battery (to about 80% capacity), then remove it and store it in a dry, cool place. Recharge every 3 months to prevent battery over-discharge damage.
  • Equipment Handling: Thoroughly clean the equipment, disassemble all accessories, apply a small amount of grease to the holder, and store accessories separately from the equipment.
  • Storage Environment: Store the equipment, battery, accessories, and charger in a dry, ventilated, and cool place, away from high temperatures, fire sources, humid environments, and metal objects to prevent equipment rust or battery short circuits.

7. Troubleshooting

Refer to the table below for common issues and their solutions. If problems persist, contact customer support.

SymptomPossible CauseSolution
Equipment fails to start1. Battery not securely installed or low power
2. Battery contacts dirty/rusty
3. Power switch malfunction
4. Motor fault
1. Reinstall battery, ensure it's locked; charge if low
2. Wipe battery contacts with dry cloth
3. Check switch flexibility; contact after-sales if faulty
4. If motor unresponsive, contact after-sales
Abnormal speed/impact frequency1. Trigger not fully pressed
2. Battery low
3. Drill bit/chisel not securely installed
4. Excessive dust inside motor
1. Fully press trigger, adjust pressure
2. Replace with fully charged battery
3. Reinstall drill bit/chisel, ensure secure
4. Clean motor air vents and interior
Severe vibration/abnormal noise1. Drill bit/chisel worn/deformed
2. Auxiliary handle not tightened
3. Internal parts loose
4. Mode selector knob not in correct position
1. Replace with good drill bit/chisel
2. Tighten auxiliary handle fixing screw
3. Stop use, contact after-sales for internal inspection
4. Re-select working mode, ensure knob points correctly
Battery fails to charge1. Charger fault
2. Battery contacts dirty/rusty
3. Battery damaged/bulging
4. Abnormal charging environment temperature
1. Try another original charger
2. Wipe battery contacts with dry cloth
3. Stop use immediately, contact after-sales for replacement
4. Adjust charging environment temperature to 0-40°C
Drill bit/chisel cannot be removed1. Not correctly locked during installation
2. Dust/debris in holder
3. Insufficient lubrication in holder
1. Rotate drill bit/chisel clockwise to unlock, then remove
2. Clean dust/debris from holder
3. Apply small amount of special grease, wait a moment, then try to remove

Note: If faults cannot be resolved using the methods above, do not attempt to disassemble the equipment yourself. Contact brand after-sales personnel promptly, providing the product model and fault description, for professional inspection and repair.

8. Specifications

Parameter NameValue
Product ModelDW DH171
Motor TypeBrushless DC Motor
Rated VoltageDC 18V
No-load Speed0-680 rpm
Impact Frequency0-4800 bpm
Drilling CapacityConcrete: 17mm, Steel: 10mm, Wood: 13mm
Collet DeviceSDS-Plus
Body Weight (with battery)2.1-2.8 kg (varies by battery model)
Body Length273mm
Vibration ValueHammer Drill Mode (concrete drilling): 9.0 m/s²
Drill Mode (metal drilling): ≤ 2.5 m/s²
(Measurement according to EN 60745 standard)

Note: Due to continuous product research and development, the above parameters may be subject to minor adjustments. The actual product shall prevail. Battery models such as BL1815N/BL1820 are compatible. Different battery models will affect equipment endurance and weight.

High Power All Copper Motor
Figure 6: High Power All Copper Motor - Provides a durable dynamic source with higher energy conversion efficiency
Precision Cylinder Powerful Hammer
Figure 7: Precision Cylinder Powerful Hammer - Adopts high strength forging technology, no overheat deformation, smooth wall cylinder, processing seal

9. User Tips

  • Value for Money: Users frequently praise the DW DH171 for its excellent cost-performance ratio and surprisingly cheap price for its build quality. It's a great tool for its price point.
  • Portability: The lightweight design makes it very useful for carrying and moving around during work, enhancing convenience on job sites.
  • SDS-Plus Compatibility: This tool is designed to work with SDS-Plus drill bits, offering versatility for various drilling and chiseling tasks.
  • Mode Awareness: The tool offers two primary modes: hammer drill and chisel. Ensure you select the correct mode for your task using the mode selector knob.
  • Manage Expectations: While offering great value, some users note it might be slightly inferior to high-end professional brands like Makita. Keep this in mind for heavy-duty, continuous professional use.

10. Environmental Protection and Disposal

  • This equipment, battery, and charger are electronic waste. Do not dispose of them indiscriminately. They must be recycled according to local environmental regulations to prevent environmental pollution.
  • The battery contains lithium ions and is classified as hazardous waste. It must be recycled separately and can be handed over to designated battery recycling points or brand after-sales service. Do not dispose of it in household waste or fire.
  • When the equipment is scrapped, first remove the battery and recycle it separately. The main body of the equipment should be handed over to a professional electronic waste recycling facility to ensure materials can be recycled.

11. Warranty and Support

11.1 Disclaimer

  1. This product is manufactured in strict accordance with relevant standards. The brand is not responsible for any equipment damage or personal injury caused by the user's failure to comply with this manual, unauthorized disassembly, modification, use of non-original accessories, or improper operation.
  2. During the product warranty period, if a non-human induced fault occurs, you can contact brand after-sales service with your proof of purchase to enjoy free repair services. Outside the warranty period, repair services will incur corresponding accessory and service fees.
  3. Due to product research and development upgrades, the content of this manual may be updated. For specific operations, the actual product shall prevail. The brand reserves the right of final interpretation.

11.2 After-Sales Service

If you encounter any problems during use, or require repair or replacement of accessories, please contact the brand's official after-sales channels. Provide the product model, proof of purchase, and a description of the fault, and we will provide you with professional after-sales support.

(Note: Some content in this document may be AI-generated)

© 2024 DW. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.