1. Product Introduction
The Zigbee Water Immersion Sensor is a device designed to detect water overflow in its environment. It requires connection to a Zigbee gateway for full functionality. Featuring high detection sensitivity, it can accurately detect water levels above 0.5mm. Upon detection, the sensor immediately sends a wireless alarm signal to the server via WiFi, which then pushes real-time alarm notifications to your mobile phone application.
2. Package Contents
- Flood Detector x1
- User manual x1
3. Product Overview and Structure
The sensor features a compact design with key components for water detection and communication. Understanding its structure is essential for proper installation and maintenance.
- Conductive Columns: These are the primary contact points for water detection.
- Reset Button: Used for network configuration and resetting the device.
- Battery Cover: Provides access to the battery compartment for replacement.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | zigbee water sensor |
| Size | Φ50 x 18mm |
| Working Temperature | 0°C ~ +55°C |
| Connection Method | ZigBee |
| Battery Type | CR2032 (Not included) |
| Certification | CE, RoHS |
| Smart Home Platform | Tuya |
| Origin | Mainland China |
5. Installation Precautions
- This product is designed for indoor installation only.
- The sensor can be directly placed in any area prone to water leakage, such as under sinks, near water heaters, or in basements.
- Do not install the sensor in locations exposed to rain, oily smoke, or steam, as this may affect its performance or cause damage.
6. Setup and Network Configuration
Follow these steps to set up your Zigbee Water Immersion Sensor and connect it to your smart home system:
6.1. Initial Setup and Battery Installation
The sensor requires a CR2032 battery (not included). To install:
- Carefully open the battery cover on the back of the sensor.
- Insert the CR2032 battery, ensuring correct polarity.
- Close the battery cover securely.
6.2. App Download and Account Registration
- Ensure your Zigbee gateway and mobile phone are connected to the same 2.4GHz WiFi network.
- Scan the QR code provided in the original manual or search for "Smart Life" App on App Store or Google Play.
- Download and install the "Smart Life" App.
- Open the App and complete the user registration process, then log in.
6.3. Pairing the Sensor with the Gateway
- On the App homepage, click the "+" icon in the upper right corner to enter the "Add Manually" page.
- Navigate to "Sensors" and select "Flood Detector (Zigbee)".
- In the App, select the Zigbee gateway you wish to use.
- The App will display a prompt page for resetting the device. Long press the Flood Detector's reset button for approximately 6 seconds until the blue indicator light begins flashing.
- In the App, confirm that the indicator is blinking rapidly and click "Next".
- The App will discover the device and add it. Once "1 device(s) have been successfully added" appears, click "Done".
- You can then edit the device name and save it. Click the back button to view the "Flood Detector" on your homepage.
7. Operation
Once successfully configured, the sensor will monitor for water leakage. When water is detected (level above 0.5mm), it will trigger an alarm and send notifications to your mobile phone.
7.1. Indicator Status Description
| Device Status | Indicator Status |
|---|---|
| Network configuration | Light flashes |
| Network configuration is successful and the network is normal | Light off |
| Network configuration is successful, send data | Light flashes once |
Refer to this table to understand the device's current status and diagnose basic issues.
8. Troubleshooting
- Device not pairing: Ensure the gateway and phone are on the same 2.4GHz WiFi. Long press the reset button for 6 seconds until the blue light flashes before attempting to pair again.
- No notifications: Check app settings for notifications. Ensure the sensor has sufficient battery. Verify the gateway is online and connected to the internet.
- False alarms: Ensure the sensor is not placed in areas with high humidity, condensation, or accidental splashes. Clean the conductive columns if they appear dirty.
- General issues: If you encounter an unsolvable problem, try resetting the network configuration of the device. If issues persist, contact product after-sales service personnel for consultation and solution.
9. Maintenance
- Battery Replacement: The sensor uses a CR2032 battery. When the battery level is low, the app may notify you. To replace, carefully open the battery cover, remove the old battery, insert a new CR2032 battery with correct polarity, and close the cover.
- Cleaning: Periodically check the conductive columns for dirt or debris. Clean them gently with a dry cloth to ensure optimal water detection. Do not use abrasive cleaners or immerse the entire device in water.
10. User Tips
- Regular Testing: Periodically test the sensor by placing it in a small amount of water to ensure it triggers an alarm and sends notifications correctly.
- Strategic Placement: Place sensors in critical areas such as under sinks, near washing machines, dishwashers, water heaters, and in basements or utility rooms.
- Battery Monitoring: Keep an eye on the battery level within the Smart Life app to ensure continuous protection.
- Gateway Stability: Ensure your Zigbee gateway has a stable power supply and internet connection for reliable sensor communication.
11. Frequently Asked Questions (FAQ)
- Q: Does this sensor work independently?
- A: No, this is a Zigbee version sensor and requires a Zigbee gateway to function and connect to your smart home network.
- Q: What type of battery does it use?
- A: It uses a CR2032 3V battery, which is not included in the package.
- Q: How do I know if the sensor is working?
- A: You can check the indicator status as described in the "Operation" section, or perform a manual test by placing it in a small amount of water.
- Q: Can I use it outdoors?
- A: No, the product is designed for indoor installation only and should not be exposed to rain, oily smoke, or steam.
12. Additional Resources
For a more detailed user manual, you can download the PDF document: