1. Setup
1.1 What's in the Box
Your Fitbit Charge 3 package includes the following items:
- Fitbit Charge 3 Tracker (color and material may vary)
- Charging Cable
- Additional Large Band (color and material may vary)

Image: Fitbit Charge 3 tracker in black and purple, alongside its charging cable.
The detachable bands for Charge 3 are available in various colors and materials and are sold separately.
1.2 Charge Your Tracker
A fully charged Charge 3 provides up to 7 days of battery life. Actual battery life may vary based on usage and other factors.
- Plug the charging cable into a USB port on your computer, a UL-certified USB wall charger, or another low-energy charging device.
- Clip the other end of the charging cable to the port on the back of the Charge 3. Ensure the pins on the charging clip securely lock with the gold contacts on the tracker's back.
- The Charge 3 will vibrate, and a battery icon will appear on the screen.
Charging typically takes 1-2 hours. You can check the battery level by pressing the buttons during charging. A solid battery icon with a smile indicates a full charge.
1.3 Set Up with Your Phone
To begin using your Charge 3, set it up with the Fitbit app on your iPhone, iPad, or Android phone. Ensure your phone is compatible by checking fitbit.com/devices.
- Download the Fitbit app from the Apple App Store (for iPhones) or Google Play Store (for Android phones).
- Install and open the app.
- Tap 'Sign in with Google' and follow the on-screen instructions to set up your device.
After setup, open the Fitbit app to view your health metrics, activity, and sleep data, or to start a workout or mindfulness session.
1.4 Wear Charge 3
Wear your Charge 3 comfortably around your wrist.
Placement for All-Day Wear vs. Exercise
- For all-day wear (when not exercising), wear the Charge 3 a finger's width above your wrist bone.
- For optimized heart-rate tracking during exercise, wear the tracker slightly higher on your wrist for an improved fit. This helps prevent interference with the heart-rate signal caused by frequent wrist bending during activities like bike riding or weight lifting.
- Always wear the tracker on top of your wrist, ensuring the back of the device is in contact with your skin.
- Tighten your band before a workout and loosen it afterward. The band should be snug but not constricting, as a tight band can restrict blood flow and affect heart-rate signal accuracy.
It is recommended to remove your tracker for about an hour after extended wear to give your wrist a break. Also, remove it while showering to reduce exposure to soaps and shampoos, which can cause long-term damage or skin irritation.
Handedness
For accurate tracking, specify whether you wear the Charge 3 on your dominant or non-dominant hand. Your dominant hand is the one you use for writing and eating. By default, the 'Wrist' setting is non-dominant. To change this in the Fitbit app:
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile > Wrist > Dominant.
1.5 Change the Band
The Charge 3 comes with a small band attached and an additional large band. Both can be swapped with accessory bands (sold separately). Refer to the 'Band size' in the Specifications section for measurements.
Remove a Band
- Turn over the Charge 3 to locate the band latches.
- Press down on the flat button on the band to release the latch.
- Gently pull the band away from the tracker to detach it.
- Repeat for the other side.
Attach a New Band
To attach a new band, press it into the end of the tracker until you feel it snap into place. If the band feels loose or you have trouble attaching it, gently move it back and forth to ensure it's securely attached.
2. Operating Instructions
2.1 Basics
The Charge 3 features an OLED touchscreen display and a single button for navigation.
Navigation
The home screen displays the clock. Navigate by tapping the screen, swiping side-to-side or up-and-down, or pressing the button.
- Swipe down to view notifications.
- Swipe up to see your daily stats.
- Swipe left to access apps on your tracker.
- Press the button to return to the previous screen or the clock face.
Quick Settings
Press and hold the button, then swipe left on Charge 3 to quickly access certain settings. Tap a setting to toggle it on or off. A dim icon with a line through it indicates the setting is off.
Quick settings include:
- DND (Do Not Disturb): Mutes notifications, goal celebrations, and reminders. The DND icon illuminates when active. Cannot be used simultaneously with Sleep Mode.
- Sleep Mode: Mutes notifications and reminders, dims the screen brightness, and keeps the screen dark when you turn your wrist. Sleep mode can be scheduled to turn off automatically. Cannot be used simultaneously with DND.
- Screen Wake: When enabled, turning your wrist towards you will turn on the screen.
Adjust Settings
Manage basic settings directly in the Settings app on your Charge 3.
- Brightness: Adjust the screen's brightness.
- Do Not Disturb: Turn off all notifications or set them to automatically turn off when using the Exercise app.
- Heart Rate: Toggle heart-rate tracking on or off.
- Screen Timeout: Choose how long the screen stays on after inactivity.
- Sleep Mode: Adjust settings, including scheduling the mode to turn on and off automatically. To set a schedule: Open the Settings app and tap Sleep Mode. Tap Schedule to turn it on. Tap Sleep Interval and set your desired schedule.
- Vibrations: Adjust the tracker's vibration strength.
Check Battery Level
From the clock face, swipe up. The battery level is displayed at the top of the screen.
2.2 Change the Clock Face
Personalize your tracker with various clock faces from the Fitbit Gallery:
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile.
- Tap Gallery > Clocks tab.
- Browse available clock faces. Tap one for a detailed view.
- Tap 'Install' to add the clock face to your Charge 3.
2.3 Notifications from Your Phone
Your Charge 3 can display call, text, calendar, and app notifications from your phone. Keep your tracker within 30 feet of your phone to receive notifications.
Set Up Notifications
Ensure Bluetooth is enabled on your phone and that your phone can receive notifications (usually found under phone Settings > Notifications).
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile.
- Tap Notifications.
- Follow on-screen instructions to pair your tracker if not already done. Call, text, and calendar notifications are enabled automatically.
- To enable notifications from other apps (e.g., WhatsApp), tap 'App Notifications' and select the desired apps.
Note: For iPhones, Charge 3 shows notifications from all synced calendars. For Android phones, it shows notifications from the calendar app chosen during setup.
See Incoming Notifications
A notification will cause your tracker to vibrate. If you miss it, swipe down from the top of the screen to view it later.

Image: Fitbit Charge 3 screen showing an incoming notification from 'Jake Smith'.
Manage Notifications
Charge 3 stores up to 10 notifications, replacing the oldest when new ones arrive.
- Swipe down from the top of the screen to view notifications. Tap any notification to expand it.
- To delete a single notification, expand it, then swipe to the bottom and tap 'Clear'.
- To delete all notifications, swipe to the top of your notifications and tap 'Clear All'.
Turn Off Notifications
You can turn off specific notifications in the Fitbit app or all notifications via quick settings on Charge 3. Turning off all notifications prevents your tracker from vibrating or the screen from turning on when your phone receives a notification.
To turn off certain notifications:
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile > Notifications.
- Toggle off the notifications you no longer wish to receive.
To turn off all notifications:
- Press and hold the button on your tracker and swipe left to reach the quick settings screen.
- Tap 'DND' to turn on Do Not Disturb. The DND icon will illuminate, indicating all notifications, goal celebrations, and reminders are off.
Note: If you use the Do Not Disturb setting on your phone, you won't receive notifications on your tracker until you disable it on your phone.
Answer or Reject Phone Calls
If paired with an iPhone or Android phone, Charge 3 allows you to accept or reject incoming calls. For older Android OS versions, you can only reject calls.

Image: Fitbit Charge 3 screen showing an incoming call from 'Jake Smith' with options to accept or reject.
- To accept a call, tap the check mark on your tracker's screen. You cannot speak into the tracker; accepting a call answers it on your nearby phone.
- To reject a call, tap the 'X' icon on your tracker's screen.
Respond to Messages (Android Phones)
For Android phones, Charge 3 allows direct responses to text messages and notifications from certain apps using preset quick replies.
- Open the notification you wish to respond to.
- Tap 'Reply'. (If 'Reply' is not available, quick replies are not supported for that app).
- Choose a text reply from the list or tap the emoji icon to select an emoji.
2.4 Timekeeping
Set alarms, use a stopwatch, or set a countdown timer on your Charge 3.
Set an Alarm
Set up to 8 one-time or recurring alarms using the Alarms app on your tracker. Your tracker will vibrate when an alarm goes off.
Enable 'Smart Wake' when setting an alarm to allow your tracker to find the optimal time to wake you within a 30-minute window before your set alarm time, avoiding deep sleep cycles for a more refreshed feeling. If Smart Wake cannot find an optimal time, the alarm will sound at the set time.
Use the Timer or Stopwatch
Time events with the stopwatch or set a countdown timer using the Timers app on your tracker. Both can run simultaneously.
2.5 Activity and Wellness
Charge 3 continuously tracks various stats and automatically syncs with the Fitbit app throughout the day.
See Your Stats
Swipe up from the clock face to view your daily stats, including:
| Category | Description |
|---|---|
| Core stats | Steps taken today, distance covered, floors climbed, calories burned, and active minutes. |
| Exercise | Number of days you met your exercise goal this week. |
| Heart rate | Current heart rate and heart-rate zone, and resting heart rate. |
| Hourly steps | Steps taken this hour, and the number of hours you met your hourly activity goal. |
| Cycle track | Information on the current stage of your menstrual cycle, if applicable. |
| Sleep | Sleep duration and sleep score. |

Image: Fitbit Charge 3 screen showing steps (1258) and heart rate (103 bpm).
Find your complete history and other information detected by your tracker in the Fitbit app.
Track a Daily Activity Goal
Charge 3 tracks your progress towards a daily activity goal. When you reach your goal, your tracker vibrates and displays a celebration.
Track Your Hourly Activity
Charge 3 helps you stay active by tracking when you're stationary and reminding you to move. Reminders nudge you to walk at least 250 steps each hour. You'll feel a vibration and see a reminder on your screen 10 minutes before the hour if you haven't walked 250 steps. Meeting the goal after a reminder results in a second vibration and a congratulatory message.
Track Your Sleep
Wear Charge 3 to bed for automatic tracking of basic sleep stats, including time asleep, sleep stages (REM, light, deep sleep), and sleep score (quality of sleep).

Image: A man checking his Fitbit Charge 3 while in bed, illustrating sleep tracking.
Charge 3 also tracks estimated oxygen variation and skin temperature throughout the night to help identify potential breathing disturbances and personal baseline variations.
See Your Heart Rate
Charge 3 tracks your heart rate continuously. Swipe up from the clock screen to see your real-time heart rate and heart-rate zone. During workouts, it displays your heart-rate zone to help you target your desired training intensity.
Practice Guided Breathing
The Relax app on Charge 3 offers personalized guided breathing sessions. All notifications are disabled during these sessions.
- Open the Relax app on Charge 3.
- Choose between a 2-minute or 5-minute session.
- Tap the play icon to start and follow the on-screen instructions.
After the session, a summary shows your alignment with the breathing prompt, heart rate at the start and end, and how many sessions you completed that week.
2.6 Exercise and Heart Health
Automatically track exercise or use the Exercise app for real-time stats and post-workout summaries.

Image: A couple walking outdoors, both wearing Fitbit Charge 3 trackers, demonstrating active use.
Track Your Exercise Automatically
Charge 3 automatically recognizes and records high-movement activities lasting at least 15 minutes. View basic stats in the Fitbit app on your phone (Today tab > Exercise tile).
Track and Analyze Exercise with the Exercise App
Use the Exercise app on Charge 3 to track specific exercises, viewing real-time stats like heart-rate data, calories burned, and elapsed time. A post-workout summary is available on your wrist. For complete workout stats and intensity maps (if GPS was used), tap the Exercise tile in the Fitbit app.
GPS Requirements
Charge 3 uses your phone's GPS sensors to capture GPS data.
- Turn on Bluetooth and GPS on your phone.
- Ensure Charge 3 is paired to your phone.
- Grant the Fitbit app permission to use GPS or location services.
- Verify GPS is turned on for the exercise within the Exercise app settings.
To track an exercise:
- On Charge 3, open the Exercise app and swipe to find an exercise.
- Tap the exercise to select it.
- Tap 'Start' or 'Set Goal'. If setting a goal, press the button to go back and tap 'Start'.
- Tap the play icon to begin. If GPS is used, you can wait for the signal to connect or start the exercise, and GPS will connect when available.
- Tap the middle of the screen to scroll through real-time stats.
- To end or pause, press the button.
- To end the workout, press the button again and tap 'Finish'. Swipe up for a workout summary. Tap the check mark to close.
- To view GPS data, tap the Exercise tile in the Fitbit app.
Notes:
- If an exercise goal is set, your tracker alerts you at the halfway point and when you reach the goal.
- When GPS is active, an icon appears in the top left. 'Connected' appears when GPS is successfully linked to your phone's sensors, and Charge 3 vibrates.
Customize Your Exercise Settings and Shortcuts
In the Fitbit app, you can customize settings for each exercise type, and change or reorder exercise shortcuts. For example, toggle connected GPS and cues, or add a yoga shortcut.
To customize an exercise setting:
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile > Exercise Shortcuts.
- Tap an exercise and adjust its settings.
Check Your Workout Summary
After a workout, Charge 3 displays a summary of your stats. The Exercise tile in the Fitbit app provides additional stats and a workout intensity map if GPS was used.
Check Your Heart Rate
Heart-rate zones help target training intensity. Your current zone and progress towards your maximum heart rate are displayed on your device. The Fitbit app shows time spent in zones daily or per exercise. Three default zones are based on American Heart Association recommendations, or you can create custom zones.
Charge 3 personalizes heart-rate zones using your heart rate reserve (difference between max and resting heart rate). It notifies you when you enter a heart-rate zone during exercise.
Default Heart-Rate Zones
Default heart-rate zones are calculated using your estimated maximum heart rate (220 minus your age).
| Zone | Calculation | Description |
|---|---|---|
| Below Zone | Below 50% of your maximum heart rate | Your heart beats at a slower pace. |
| Fat Burn Zone | Between 50% and 69% of your maximum heart rate | Moderate activity, like a brisk walk. Heart rate and breathing may be elevated, but you can still converse. |
| Cardio Zone | Between 70% and 84% of your maximum heart rate | Vigorous activity, like running or spinning. |
| Peak Zone | Greater than 85% of your maximum heart rate | Short, intense activity for performance and speed, such as sprinting or high-intensity interval training. |
Custom Heart-Rate Zones
You can create a custom heart-rate zone in the Fitbit app to target a specific range instead of using the default zones.
Share Your Activity
After completing a workout, open the Fitbit app to share your stats with friends and family.
2.7 Contactless Payments
Some Charge 3 editions include a built-in NFC chip for contactless payments using your credit and debit cards. To check if your Charge 3 supports Fitbit Pay, remove the bottom band and look for 'Fitbit Pay' printed on the end of the tracker.
Use Credit and Debit Cards
Set up Fitbit Pay in the Fitbit app to make purchases at stores that accept contactless payments. For a list of supported banks, visit fitbit.com/fitbit-pay/banks.
Set Up Contactless Payments
To use contactless payments, add at least one credit or debit card from a participating bank to the Fitbit app. The app allows you to add/remove cards, set a default card, edit payment methods, and review purchases.
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile.
- Tap the 'Wallet' tile.
- Follow on-screen instructions to add a payment card. Additional bank verification may be required. If adding a card for the first time, you might be prompted to set a 4-digit PIN code for your tracker. Ensure passcode protection is enabled on your phone.
- After adding a card, follow instructions to enable notifications for your phone to complete setup.
Make Purchases
You can add up to 5 payment cards to the Wallet and choose a default. Look for the contactless payment symbol on the payment terminal.
To pay:
- If prompted, enter your 4-digit tracker PIN code. Your default card will appear.
- Hold your wrist near the payment terminal. To use a different card, tap to find it, then hold your wrist near the terminal.
For customers in Australia:
- Hold your tracker near the payment terminal. If your card is from a bank outside Australia, or if you wish to use a non-default card, follow steps 1-3 in the general 'Make Purchases' section above.
- If prompted, enter your 4-digit tracker PIN code.
- If the purchase exceeds $100 AU, follow the payment terminal instructions. If prompted for a PIN, enter the PIN for your card (not your tracker).
Your tracker will vibrate and show a confirmation upon successful payment. If the terminal doesn't recognize your Fitbit device, ensure the tracker face is close to the reader and the cashier is aware you're using contactless payment. For added security, Charge 3 must be worn on your wrist for contactless payments.
Change Your Default Card
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile.
- Tap the 'Wallet' tile.
- Find the card you want to set as default.
- Tap 'Set as Default on Charge 3'.
Pay for Transit
Use contactless payments to tap on and off at transit readers. Use the same card on your Fitbit tracker at the start and end of your trip. Ensure your device is charged before starting your journey.
2.8 Weather
View the weather for your current location and up to 2 additional chosen locations in the Weather app on your tracker.
If weather data doesn't appear, ensure location services are on for the Fitbit app. Sync your tracker to update location and weather data.
To add or remove a city:
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile.
- Tap 'Gallery'.
- Tap the 'Weather' app (you may need to swipe up to find it).
- Tap 'Settings' > 'Add city' to add up to 2 locations, or tap 'Edit' > 'X' icon to delete a location. Your current location cannot be deleted.
2.9 Agenda
Connect your phone's calendar in the Fitbit app to view upcoming calendar events for today and tomorrow in the Agenda app on your tracker.
2.10 Product Overview Video
Video: A general overview of the Fitbit Charge 3's features and design.
3. Maintenance
3.1 Wear and Care Tips
- Clean your band and wrist regularly with a soap-free cleanser.
- If your tracker gets wet, remove and dry it completely after your activity.
- Take your tracker off periodically to allow your skin to breathe.
4. Troubleshooting
4.1 Restart Charge 3
If you experience issues with syncing, tracking stats, or receiving notifications, restart your tracker from your wrist:
- Open the Settings app on your Charge 3 and tap 'About' > 'Reboot Device'.
If your Charge 3 is unresponsive:
- Connect Charge 3 to the charging cable.
- Press and hold the buttons on your tracker for 8 seconds. Release the buttons. When you see a smiley face and Charge 3 vibrates, the tracker has restarted.
Restarting your tracker does not delete any data.
Important: Charge 3 has a small hole (altimeter sensor) on the back. Do not insert any items (e.g., paper clips) into this hole, as it can damage your tracker.
4.2 Heart-Rate Signal Missing
If your tracker isn't detecting a heart-rate signal (dashed lines appear), ensure heart-rate tracking is enabled in the Settings app on your tracker. Also, check that you are wearing the tracker correctly: try moving it higher or lower on your wrist, or tightening/loosening the band. The Charge 3 should be in contact with your skin. After holding your arm still for a short period, your heart rate should reappear.
4.3 GPS Signal Missing
Environmental factors (e.g., tall buildings, dense forests, steep hills, thick cloud cover) can interfere with your phone's ability to connect to GPS satellites. If your phone is searching for a GPS signal during exercise, 'connecting' will appear at the top of the screen. For best results, wait for your phone to acquire the GPS signal before starting your workout.
4.4 Other Issues
If you encounter any of the following problems, restart your tracker:
- Won't sync
- Won't respond to taps, swipes, or button presses
- Won't track steps or other data
- Won't show notifications
5. Specifications
5.1 General Information
Sensors and Components
- Optical heart-rate tracker
- Altimeter (tracks altitude changes)
- 3-axis accelerometer (tracks motion patterns)
- Vibration motor
Materials
The housing and buckle are made of anodized aluminum. The classic band is made of a flexible, durable elastomer material. Anodized aluminum may contain trace amounts of nickel, which can cause allergic reactions in sensitive individuals; however, the nickel content in all Fitbit products complies with the European Union's stringent Nickel Directive.
Wireless Technology
- Bluetooth 4.0 radio transceiver
- NFC chip (in Fitbit Pay-enabled devices)
Haptic Feedback
Charge 3 includes a vibration motor for alarms, goals, notifications, and reminders.
Battery
Charge 3 contains a rechargeable lithium-polymer battery.
Memory
Charge 3 stores daily stats, sleep information, and exercise history for 7 days. Historical data can be viewed in the Fitbit app.
Display
Charge 3 features an OLED display.
Band Size
Accessory bands may vary slightly in size.
| Band Type | Wrist Circumference |
|---|---|
| Small band | 5.5 - 7.1 inches (140 mm - 180 mm) |
| Large band | 7.1 - 8.7 inches (180 mm - 220 mm) |
Environmental Conditions
| Condition | Range |
|---|---|
| Operating temperature | 14° to 113° F (-10° to 45° C) |
| Non-operating temperature | -4° to 14° F (-20° to -10° C) and 113° to 140° F (45° to 60° C) |
| Maximum operating altitude | 30,000 feet (9,144 m) |
5.2 Detailed Product Properties
| Property | Value |
|---|---|
| Brand Name | DIXSG |
| Model | Charge 3 |
| Category | Smart Watches |
| Type | wearable |
| Application Age Group | Adult |
| Style | SPORT |
| Compatibility | All Compatible |
| System | Android OS, IOS |
| Language | English, Spanish, French, German, Korean, Japanese, Arabic |
| Function | Passometer, fitness tracker, sleep tracker, message reminder, push message, chronograph, alarm clock, heart rate tracker |
| Metrics Measured | Heart Rate Monitor, Sleep Monitor, Blood Pressure Monitor |
| Activity Tracked | Steps Tracker, Distance Tracker, Calorie Tracker, Activity Tracker |
| Touch Screen | Yes |
| Screen Material | LED |
| Dial Window Material Type | Glass |
| Screen Shape | SQUARE |
| Display Size | 1.35 Inches |
| Resolution | 0 (Note: This value might indicate a non-standard resolution reporting or a placeholder) |
| Case Material | Alloy |
| Band Material | Silica Gel |
| Band Detachable | Yes |
| Waterproof Grade | Life Waterproof |
| Battery Life | 3-5 days (also listed as 4 days) |
| Battery Capacity (mAh) | 120-180mAh |
| Battery Detachable | No |
| Bluetooth-compatible Version | 4.0 |
| RAM | 1 GB (also listed as 4GB) |
| ROM | <128MB |
| Voice assistant built-in | No |
| APP Download Available | Yes |
| App Name | fitbit |
| SIM Card Available | No |
| Mechanism | No |
| Multiple Dials | No |
| GPS | No (Note: Uses connected GPS from phone) |
| Network Mode | None |
| Rear Camera | None |
| Origin | Mainland China |
| Hign-concerned Chemical | None |
6. Warranty and Support
6.1 Return Policy and Warranty
For detailed warranty information and the fitbit.com return policy, please visit the official Fitbit website.
6.2 Regulatory and Safety Notices
The Fitbit Charge 3 complies with various regulatory standards globally. Regulatory content specific to your region can be viewed on your device under Settings > About > Regulatory Info.
This device meets the requirements for RF exposure in public or uncontrolled environments.
USA: Federal Communications Commission (FCC) statement
Models FB409 and FB410 comply with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Canada: Industry Canada (IC) statement
Models FB409 (IC: 8542A-FB409) and FB410 (IC: 8542A-FB410) comply with Industry Canada license-exempt RSS standard(s). Operation is subject to the same two conditions as FCC. The IC ID can also be viewed on your device.
European Union (EU)
Models FB409 and FB410. Fitbit, Inc. declares that the radio equipment type Model FB410 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.fitbit.com/safety.
Other Regions: Compliance information for Customs Union (EAC), Argentina, Australia and New Zealand, Belarus, China, India, Indonesia, Israel, Japan, Mexico, Morocco, Nigeria, Oman, Pakistan, Philippines, Serbia, South Korea, Taiwan, United Arab Emirates, Vietnam, and Zambia is available in the full PDF manual and on the device itself.
Battery Warning: This device uses a lithium-ion battery. Failure to follow guidelines may shorten battery life or risk damage, fire, chemical burn, electrolyte leakage, or injury. Do not disassemble, puncture, damage, expose to flames, or use sharp objects to remove the battery.
For a complete list of regulatory information, please refer to the official user manual PDF: Fitbit Charge 3 User Manual (PDF).
6.3 Learn More
To learn more about your tracker, how to track your progress in the Fitbit app, and how to build healthy habits with Fitbit Premium, visit help.fitbit.com.
7. User Tips
- Contactless Payments: The Fitbit Charge 3 supports NFC for contactless payments, allowing you to use your device for wallet transactions at compatible terminals.