CARABC SMEG & MRN System Upgrade Module

Contents

CARABC Wireless CarPlay Android Auto Navigation Upgrade Module

For Peugeot & Citroen SMEG & MRN Systems

1. Introduction

This manual provides detailed instructions for the installation and operation of the CARABC Wireless CarPlay Android Auto Navigation Upgrade Module. This module integrates advanced smartphone connectivity into your vehicle's existing SMEG or MRN system, enhancing your driving experience with modern features.

The module allows for seamless interaction with your iPhone or Android device, providing access to navigation, music, phone calls, and other applications directly on your car's display. It supports both wireless and wired CarPlay/Android Auto connections, along with mirroring capabilities for a comprehensive in-car entertainment and information system.

CARABC module with CarPlay and Android Auto icons, showing integration into a car dashboard.
The CARABC module integrates CarPlay, Android Auto, Mirroring, and Navigation into your vehicle's existing display.

2. Product Information

2.1 Compatible Vehicles

This module is designed for Peugeot and Citroen vehicles equipped with SMEG & MRN systems. Compatible models include:

  • Peugeot: 208, 308, 508, 3008
  • Citroen: C4, C5, DS3, DS4, DS5

Please verify your vehicle's system information to ensure compatibility. An example of a compatible SMEG system version is SMEG5.2.C.R1 or SMEG5.41.B.R4.

Car screen displaying system information for SMEG&MRN, showing software version SMEG5.2.C.R1.
Example of a compatible SMEG&MRN system information screen.

2.2 Package Contents

The product package typically includes the following components:

  • CARABC Main Module Unit
  • Power Cable
  • CAN Gateway Cable
  • WiFi Antenna
Image showing the main module unit, power cable, CAN Gateway Cable, and WiFi Antenna.
Main module unit and included accessories.

3. Setup and Installation

This installation manual is intended for professionals. Incorrect installation may damage the product or vehicle. It is highly recommended to seek professional assistance for installation.

3.1 Dip Switch Settings

CAUTION: Please ensure the CarPlay POWER is disconnected when adjusting the dip switches. Once the dip switches are set, then connect CarPlay POWER.

The dip switches configure the module for your specific car model and screen size. Refer to the table below for common settings:

13-16 Peugeot/Citroen SETTING
Dip switches12Car Model
OFFOFFDefault
OFFONAnother reverse data
34Screen Size
OFFOFF800*480 7"

3.2 Wiring Diagram

The following diagram illustrates the connection points for the CARABC module within your Peugeot/Citroen MRN system. Ensure all connections are secure and correctly routed.

Detailed wiring diagram for Peugeot Citroen MRN Installation, showing connections for LVDS, ANT, POWER, and various cables.
Wiring diagram for the CARABC module installation. Connect LVDS to the original vehicle LVDS, ANT to the antenna, and POWER to the power supply. Ensure the CAN Gateway Cable and other specific cables are connected as shown.
  • LVDS: Connect to the original vehicle LVDS.
  • ANT: Connect the WiFi Antenna.
  • POWER: Connect the power cable.
  • Yellow: B+ (Battery Positive)
  • Red: ACC (Accessory Power)
  • Black: GND (Ground)
  • Blue: Camera Power Supply
  • Brown: Rear detect, Connect to the rearview light cable or 360 panoramic detection cable.
  • White (360-TX) & White/Black (360-RX): Connect to 360 panoramic universal box TXD/RXD.
  • REAR-CVBS: Connect to rearview camera or 360 degree panoramic AHD output.
  • FRONT-CVBS: Connect to the frontview camera.
  • AUX: Audio output.
  • USB: Connect mobile phone, USB flash drive, software upgrade.

Note on Audio Output:

  1. Before switching to the CarPlay interface, connect your phone to the original car's Bluetooth and select both call and media. Then select the original car audio on the Bluetooth stereo interface.
  2. Alternatively, before switching to the CarPlay interface, switch the original car sound channel to the AUX channel.

4. Operating Instructions

4.1 Wireless CarPlay Connection

  1. On your phone, open Wi-Fi and Bluetooth.
  2. On the car's display, navigate to 'Wireless CarPlay Settings' > 'Discover and connect devices'.
  3. Select the Bluetooth device name starting with "CX_BT....." and pair your phone with it.

4.2 Wireless Android Auto Connection

  1. On your phone, open Wi-Fi and Bluetooth.
  2. On the car's display, navigate to 'Wireless Android Auto Settings'.
  3. Select the Bluetooth device name starting with "CX-BTXXXX" and pair your phone with it.
Car screen showing Wireless Apple CarPlay, Wireless Android Auto, and Mirroring interfaces.
Demonstration of Wireless Apple CarPlay, Wireless Android Auto, and Mirroring functionality.

4.3 Voice Control

The module supports voice control (e.g., Siri for Apple CarPlay) for hands-free operation. You can use voice commands to play music, get directions, make calls, and more.

  • Activate Voice Control: Long press the appropriate steering wheel button (usually the phone button) to activate voice control.
Car screen showing voice control interface with example commands like 'Navigate to home', 'Play music', 'Call John', 'How's the weather today?'.
Voice control allows for hands-free interaction with your connected smartphone.

4.4 Original Vehicle Button Control

The module integrates with your vehicle's existing steering wheel buttons for convenient control.

  • Long press to switch system: Use a designated button (e.g., 'LIST' or 'SRC') to switch between the original car system and the module's interface.
  • Short press to answer/hang up phone: Use the phone button for call management.
  • Long press to activate Voice control: Use the phone button to activate Siri or Google Assistant (without using the original car Bluetooth).
  • Short press volume up/down: Use the volume buttons to adjust audio levels.
Images showing steering wheel buttons and their functions for system switching, call handling, voice control, and volume adjustment.
The module supports original vehicle button controls for seamless operation.

4.5 Car Settings

Access the car settings menu to configure various features:

  • Advanced Features: Parking Guideline, Park Distance control, Original Camera, 360 Panoramic, AHD Camera Type, Front View, Reverse exit delay.
  • Audio Settings: Volume, MIC Sensitivity, EQ, Original MIC, Use the original Bluetooth Audio, Automatic echo cancellation.

4.6 Reversing Video Input

The smart module can decode video and supports rear-view video input. This allows for the integration of a rear-view camera.

  • Cam-power: Connect to camera power.
  • Rear-CVBS/AHD720P (25FPS/30FPS): Connect to camera input.

5. Maintenance

To ensure the longevity and optimal performance of your CARABC module, follow these general maintenance guidelines:

  • Keep the module and its connections clean and free from dust and debris.
  • Avoid exposing the module to extreme temperatures or moisture.
  • Ensure all cables are securely connected and not under strain.
  • Do not attempt to open or repair the module yourself, as this may void the warranty.

6. Troubleshooting

If you encounter any issues with your CARABC module, refer to the following troubleshooting steps:

  1. Screen not displaying normally: Check the LVDS cable connection and verify the DIP Switch settings are correct for your vehicle model.
  2. Sound problems: Ensure the Multimedia and install system settings of the original car are correctly configured, especially the AUX input or Bluetooth audio settings.
  3. Install mainframe's pilot lamp not working: Check the power cable connection and ensure the fuse is intact and functioning normally.

7. Specifications

ParameterValue
Operating Voltage9 - 16 V
Operating Temperature-30 ~ +75°C
Stored Temperature-30 ~ +85°C
Environment Humidity≤98% (at 45°C), 65±5% (rated)
Power Consumption500mA (rated), 3A (Max)
Shutdown Current3 mA (Clock is on)
Quiescent CurrentLess than 3 mA
Charging Current≤2A (Host activates circuit protection if USB charging current > 1A, controls current below 1.5A to prevent damage)

8. User Tips

  • Verify System Compatibility: Before installation, always confirm your vehicle's SMEG or MRN firmware version (e.g., SMEG5.43.A.R2) to ensure full compatibility with the module.
  • Check Model Year: Specific model years (e.g., Peugeot 308cc 2014) might have variations. Double-check compatibility for your exact vehicle model and year.
  • Touch Screen Functionality: The module is designed to work with your car's existing display, including touch screen functionality if your vehicle is equipped with one.
  • Power Disconnection: Always disconnect the CarPlay POWER when making or adjusting dip switch settings to prevent damage.
  • Audio Source: Remember to switch your car's audio source to AUX or ensure your phone is connected to the original car's Bluetooth for audio output from the module.

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.