1. Introduction
This manual provides essential information for the safe and effective use of your Keenkee Stainless Steel Straight Angle Metal Brackets. These brackets are designed as connecting pieces, fixing plates, and support frames for various types of furniture and wood boards. They are suitable for L-shaped, T-shaped, and straight bar-shaped connections.
For a visual overview of the product and its applications, please watch the following video:
Product demonstration video showing the brackets in hand and installed on furniture.
2. Safety & Warnings
▲ Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- ▲ Warning: Keep the product and its accessories out of reach of children under 3 years old.
- Strictly prohibit overloading. Overloading the use may cause the connection parts to break or the screws to come out, resulting in the collapse of the furniture, injuries to people or property damage.
- When installing, please wear protective gloves to avoid being injured by sharp metal edges.
- Screws that match the diameter of the angle code holes must be used. Oversized screws may cause the angle code to deform or break.
- Do not over-tighten the screws, as it may cause thread breakage or damage to the sheet material.
- Regularly check whether the screws are loose. If any rust or deformation is found, they should be replaced immediately.
3. Product Overview
The Keenkee Straight Angle Metal Brackets are versatile fasteners made from durable stainless steel, available in various sizes and finishes (stainless and black). They are designed to provide strong, stable connections for furniture and woodworking projects.
Assortment of straight metal brackets in stainless steel and black finishes.
Stainless steel finish.
Black finish.
4. Specifications
| Attribute | Detail |
|---|---|
| Model Number | M00171 |
| Batch/Serial Number | WXM00171-2601 |
| DIY Supplies | Woodworking |
| Origin | Mainland China |
| Type | Straight Brackets |
| Color | Stainless, Black |
| Material | Stainless Steel |
| Dimensions (Length) | 3.8" (96.5mm) and 5" (127mm) |
| Dimensions (Width) | 0.75" (19mm) |
| Dimensions (Thickness) | 2.35mm - 3mm |
| Package Length | 18 cm |
| Package Width | 15 cm |
| Package Height | 2 cm |
| Package Weight | 0.116 kg |
Detailed dimensions of the brackets.
5. Setup & Installation
These brackets are auxiliary support components and cannot replace the main load-bearing structure. They are suitable for indoor dry environments only. Do not use in damp or acidic/basic conditions.
Correct Usage Method:
- Positioning: Place the bracket tightly against the corner angle between the two connection surfaces, maintaining a 90° angle or the angle required by your design.
- Pre-drilling (Recommended): To reduce the risk of wood cracking, it is recommended to use a drill bit with a diameter slightly smaller than the screws to make initial pilot holes.
- Fixing: Insert the screws through the holes in the brackets. Use a screwdriver or electric drill to tighten them until the brackets are tightly attached to the surface of the panel.
- Check: Ensure that all screws are not loose and the brackets are not deformed.
Prohibition of Installation: Do not install on surfaces such as glass, thin-walled metal pipes (with a wall thickness of less than 1mm), gypsum boards, foam bricks, and ceramic tile finishes that cannot provide sufficient holding force for screws.
Brackets are supplied with screws for installation.
Example of horizontal installation.
Example of vertical installation.
6. Maintenance
To ensure the longevity and safety of your connections, regularly check the brackets and screws:
- Regularly check whether the screws are loose. If any rust or deformation is found, they should be replaced immediately.
- Clean the brackets with a soft, dry cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
7. Troubleshooting
No specific troubleshooting steps are typically required for this product beyond ensuring correct installation and regular maintenance as described above. If you encounter issues such as loose connections or damaged brackets, refer to the 'Safety & Warnings' and 'Maintenance' sections for guidance on inspection and replacement.
8. User Tips
Based on user feedback, here are some helpful tips for using your Keenkee brackets:
- These brackets are excellent for joining two pieces of wood or furniture together, providing a solid connection.
- Users have noted the solid quality of the metal, making them reliable for attaching boards.
- The measurements are generally accurate, so ensure you select the correct length for your project.
9. FAQ
No frequently asked questions are available at this time.
10. Warranty & Support
Manufacturer Information:
- Company Name: Shenzhen Wenxinmeijia Household Product Co., Ltd
- Full Address: B1C031 #5 Plaza, Huanancheng Pinghu, Longgang District Shenzhen City
- Email: servicenter@keenkee.online
- Telephone: 86-13164762726
EU Authorized Representative:
- Company Name: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
- Full Address: CASTELLANA 9141, 28046 Madrid, Spain
- Email: compliance.gavimosa@outlook.com
- Telephone: 34-688185858
Compliance Information:
This product complies with the health, safety, and environmental protection standards, indicated by the CE Mark.
A detailed user manual (PDF) is available for download at: User Manual (PDF)