1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your VGEBY EN06 Electric Cycle LCD Display. Designed for electric bikes and scooters, the EN06 display offers real-time data and robust performance. Please read this manual thoroughly before use to ensure proper function and safety.
2. Safety Information
- WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children.
- Ensure all connections are secure and waterproof before riding.
- Do not attempt to open or modify the display unit, as this may void the warranty and cause damage.
- Always turn off the electric cycle's power before connecting or disconnecting the display.
3. Product Features
- Multiple Data Display: Accurately reflects battery power, records real-time power consumption, and helps ensure riding mileage.
- Compatible Voltage: Supports 24V, 36V, and 48V systems, providing stable performance across various electric cycles.
- Wide Application: Suitable for mounting on 22.2mm handlebars, making it a versatile accessory for electric bikes, scooters, and other compatible vehicles.
- Durable and Water Resistant: The plastic casing is designed for good toughness and water resistance, protecting the internal circuit from environmental elements.
- Easy Replacement: The display is designed for easy installation and disassembly, allowing for convenient replacement of old or damaged parts to maintain optimal strength and functionality.
4. Specifications
| Attribute | Value |
|---|---|
| Item Type | Electric Cycle EN06 LCD Display |
| Material | PVC, Copper, ABS |
| Color | Black |
| Weight | Approx. 73g / 2.6oz |
| Application Voltage | 24V, 36V, 48V |
| Handlebar Diameter | 22.2mm (for mounting) |
| Communication Protocol | No. 2 (Please verify compatibility) |
5. Setup and Installation
The EN06 LCD display is designed for straightforward installation. Follow these steps:
- Mounting the Display: Securely attach the display unit to your electric cycle's 22.2mm handlebars using the integrated clamp. Ensure it is positioned for optimal visibility and accessibility during operation.
- Connecting the Wiring: The display connects to your controller via a 5-pin connector. Ensure the communication protocol of your controller matches the No. 2 protocol of this display. Carefully align the pins and push the connector firmly into place.
Standard Connector Sequence Table:
| Sequence No. | Wire Colour | Functions |
|---|---|---|
| 1 | Red (VCC) | Panel Power Cord |
| 2 | Blue (K) | Controller Power Cord |
| 3 | Black (GND) | Panel Ground Wire |
| 4 | Green (RX) | Panel Data Receiving Wire |
| 5 | Yellow (TX) | Panel Data Sending Wire |
6. Operating Instructions
Once installed and powered on, the EN06 LCD display provides essential riding information:
- Power On/Off: Press and hold the power button (usually marked with a circle and vertical line) to turn the display on or off.
- Data Display: The screen will show various data points such as current speed, battery level, and potentially other metrics depending on your controller's capabilities.
- Adjusting Settings: Use the '+' and '-' buttons to navigate through different display modes or adjust settings like assist levels, if supported by your controller. Refer to your electric cycle's main controller manual for specific functions accessible via the display.
7. Maintenance
- Cleaning: Wipe the display screen and casing with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the plastic.
- Inspection: Periodically check the wiring and connectors for any signs of wear, damage, or loose connections.
- Storage: If storing your electric cycle for an extended period, ensure the display is clean and dry. Store in a cool, dry place away from direct sunlight.
8. Troubleshooting
- Display Not Powering On: Check the power connection to the controller and ensure the electric cycle's battery is charged and turned on.
- Incorrect Data or No Data Displayed: Verify that the display's communication protocol (No. 2) is compatible with your electric cycle's controller. Ensure all wiring connections are secure and correctly seated. If you are replacing an old meter, confirm that the model number of the previously used meter is identical to the EN06.
- Water Ingress: Although the casing is water-resistant, severe exposure to water can cause issues. If water enters the unit, disconnect power immediately and allow it to dry completely before attempting to use it again.
9. User Tips
No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation.
10. Warranty and Support
For product support, warranty claims, or further inquiries, please contact the manufacturer or their authorized representative:
Manufacturer:
- Company Name: Dongguan Shengjing Hardware Jewelry Co., Ltd
- Address: Shop B, No. 1, Lane 12, Jinxin Street, Jinxia New Village, Jinxia Community, Chang'an Town, Dongguan City
- Email: 740281458@qq.com
- Telephone: 86-13924672248
EU Authorized Representative:
- AR Company Name: Kequ Technology s.r.o.
- Address: Pražákova 1008/69, Štýřice, 63900 Brno, Jihomoravský kraj, Czech Republic
- Email: christopher25106@outlook.com
- Telephone: 420-123456789
For additional documentation, including a PDF version of the user manual, please refer to the following link: User manual (PDF)