1. Introduction
Thank you for choosing the Fieryzeal 60W Moving Head Light. This manual provides important information for the safe and effective use of your device. Please read it carefully before operation and keep it for future reference.
This product is designed for professional stage and DJ applications, offering versatile lighting effects for various events such as parties, discos, weddings, and more.
2. Safety Instructions and Operating Precautions
To ensure safe operation and prevent damage, please observe the following:
- Grounding: Plug the device into a grounded power outlet for indoor use only.
- Environment: Do not expose the device to rain or moisture. Avoid the risk of fire or electric shock. Ensure no flammable objects are near the device.
- Ventilation: Install the equipment in a well-ventilated place, at least 50cm from any surface. Ensure ventilation slots are not blocked.
- Power Disconnection: Always disconnect the equipment from the power supply before any operation, maintenance, or cleaning.
- Temperature: The ambient operating temperature should not exceed 40°C, and the maximum ambient temperature is 45°C. Do not operate the device at higher temperatures.
- Malfunction: If a fault occurs, stop using the equipment immediately. Do not attempt to repair the equipment yourself. Improper maintenance can result in damage and malfunction. Contact technical support for repair approval. Only original accessories should be used, and ensure the power cord is not blocked or damaged.
- Eye Protection: Do not expose your eyes directly to the light source, as this can be a sign of a seizure in sensitive individuals.
- Decorative Use: These lamps are intended for decoration and are not suitable for ordinary household lighting.
- Fuse Replacement: If the fuse blows, unplug the device from the power supply. Remove the fuse holder with a screwdriver, replace the burnt fuse with one of the same characteristics (3A), then re-insert the holder and connect the device to the power supply. If the fuse continues to blow after replacement, stop using the device and contact customer support.
- Secure Installation: Fix the equipment using the screw holes on the bracket to ensure it is firmly secured. This prevents vibration and movement during operation. Always check that the installation structure is strong enough to withstand at least ten times the equipment's weight.
- Professional Installation: Equipment must be fixed by professionals in locations inaccessible to children and the elderly, and where no one can pass directly underneath.
CAUTION: DO NOT OPEN THE HOUSING - RISK OF ELECTRIC SHOCK
3. Unpacking Instructions
Upon receiving your device, carefully unpack it and check the contents against the list below. If any items are damaged or missing, notify the carrier immediately and retain all packaging materials for safe transport.
Package Contents:
- 1 x Moving Head Light
- 1 x Power Cord
- 1 x Remote Control
- 1 x User Manual
- 1 x Bracket
- 2 x Screws (pre-installed on the machine)
Video: Unboxing and initial setup of the Fieryzeal 60W Moving Head Light.
4. Setup and Installation
Follow these steps to properly install your moving head light:
- Attach the bow bracket to the device using the provided screws.
- Secure the bow bracket to your desired mounting surface.
- Ensure the bracket position is correctly installed and stable.
- Verify that the installation is secure and the bracket can support the device.
Note: Hook brackets are not included in the package.
5. Operating Instructions
5.1. LED Display and Control Panel
The device features a 4-digit digital display and control buttons for easy operation.
- MENU: Accesses the menu options.
- DISPLAY: 4-digit digital display.
- DMX IN: DMX signal input port.
- DMX OUT: DMX signal output port.
- FUSE: Fuse holder.
- POWER: Power input.
- FAN: Cooling fan.
5.2. Startup Steps for Various Modes
- Automatic Mode:
- Press "MENU" to find "au01" or "au02".
- Press "ENTER".
- Use "UP" or "DOWN" to select "au01" or "au02".
- Press "ENTER" again.
- Press "ENTER" twice to automatically adjust playback speed, or use "UP" or "DOWN" to manually adjust speed (higher value = faster, lower value = slower).
- Sound Mode:
- Press "MENU" to find "snon".
- Press "ENTER".
- Use "UP" or "DOWN" to select "snon".
- Press "ENTER" again.
- Press "ENTER" twice to start sound sensitivity adjustment, or use "UP" or "DOWN" to adjust sensitivity speed (higher value = faster, lower value = slower).
5.3. Remote Control Function
The device can be controlled via the included wireless remote control. Ensure the DMX cable is unplugged and the device is set to Remote Control ON for remote operation. If controlling via the menu, set the remote to OFF.
| Button | Function |
|---|---|
| ON/OFF | Switch light |
| FLASH | Strobe light (valid in custom mode) |
| SAVE | Save current settings |
| AUTO 0,1,2 | Self-propelled effect 0,1,2 |
| RCSP+ | Self-propelled speed increases |
| RCSP- | Self-propelled speed decreases |
| SOUND 0,1,2 | Sound control effect 0,1,2 |
| RCSP+ (Sound) | Increase sound control sensitivity |
| RCSP- (Sound) | Decrease sound control sensitivity |
| X+ | X-axis position plus / Manual positioning switch |
| X- | X-axis position minus |
| Y+ | Y-axis position plus |
| Y- | Y-axis position minus |
| Color+ | Select color in positive direction |
| Color- | Invert color selection |
| RCSP+ (Color) | Color wheel automatic color change interval plus |
| RCSP- (Color) | Color wheel automatic color change interval reduction |
| GOBO+ | Forward selection mode for gobos |
| GOBO- | Reverse selection mode for gobos |
| RGSP+ | Template automatic switching interval |
| RGSP- | Automatic switching template interval time |
5.4. Console Mode and Master-Slave Mode (DMX512)
For DMX control, connect the DMX OUT of the console to the DMX IN of the first fixture. Then, connect the DMX OUT of the first fixture to the DMX IN of the second, and so on.
- Setting DMX Address: Press "MENU" to find "addr", then press "ENTER". The display will show "a001". Use "UP" or "DOWN" to select the desired DMX address (001-512).
- Master-Slave Setup: Set the first fixture to self-propelled or voice-activated mode (as per startup mode). Subsequent fixtures (2, 3, 4, etc.) should be set to DMX512 mode with their respective DMX addresses, starting from 001.
5.5. DMX Channel Functions
The device supports 9-channel and 11-channel DMX control modes.
9-Channel Mode (9CH)
| Channel | Function | Value Range |
|---|---|---|
| 1 | Pan Running | 0-255 |
| 2 | Tilt Running | 0-255 |
| 3 | Color (Choose color) | 10-139 |
| Color (Auto change) | 144-255 (slow to fast) | |
| 4 | Gobo (Fixed Gobo) | 8-63 |
| Gobo (Pattern dither) | 72-127 | |
| Gobo (Auto change) | 128-255 (slow to fast) | |
| 5 | Strobe | 0-255 |
| 6 | Dimming | 0-255 |
| 7 | Running Speed in Pan/Tilt | 0-255 |
| 8 | Auto Mode (Function of Other Channel) | 0-59 |
| Auto Mode | 60-159 | |
| Sound Mode | 160-255 | |
| Pan Running | 10-100 | |
| Tilt Running | 101-200 | |
| Pan, Tilt Running | 201-249 | |
| Reset | 250-255 | |
| 9 | Y Reset | 101-200 |
| X, Y Reset | 201-249 | |
| Reset | 250-255 |
11-Channel Mode (11CH)
| Channel | Function | Value Range |
|---|---|---|
| 1 | Pan Running | 0-255 |
| 2 | Pan Fine-tune | 0-255 |
| 3 | Tilt Running | 0-255 |
| 4 | Tilt Fine-tune | 0-255 |
| 5 | Color (Choose color) | 10-139 |
| Color (Auto change) | 140-255 (slow to fast) | |
| 6 | Gobo (Fixed Gobo) | 8-63 |
| Gobo (Pattern dither) | 72-127 | |
| Gobo (Auto change) | 128-255 (slow to fast) | |
| 7 | Strobe | 0-255 |
| 8 | Dimming | 0-255 |
| 9 | Running Speed in Pw/Tilt | na-255 |
| 10 | Auto Mode (Function of Other Channel) | 0-59 |
| Auto Mode | 60-159 | |
| Sound Mode | 160-255 | |
| Pan Running | 10-100 | |
| Tilt Running | 101-200 | |
| Pan, Tilt Running | 201-249 | |
| Reset | 250-255 |
6. Maintenance
- Cleaning: Regularly clean the optical lens and exterior to maintain optimal light output and appearance. Use a soft, dry cloth. Ensure the device is powered off and unplugged before cleaning.
- Fuse Replacement: Refer to the "Safety Instructions" section for detailed steps on replacing the fuse. Always use a fuse with the same characteristics (3A).
- Ventilation: Ensure the cooling fan and ventilation slots remain clear of dust and debris to prevent overheating.
- Storage: When not in use for extended periods, store the device in a dry, dust-free environment.
7. Troubleshooting
- Device not powering on: Check the power cable connection and the fuse. If the fuse blows repeatedly, contact technical support.
- Light not responding to remote: Ensure the DMX cable is unplugged and the device is set to Remote Control ON. Check the remote's battery.
- Light not responding to DMX: Verify DMX cable connections, DMX address settings, and ensure the device is in DMX mode.
- Overheating: Ensure proper ventilation and that the cooling fan is not obstructed. Operate within specified temperature limits.
- General Malfunction: If the device exhibits unusual behavior or stops functioning, discontinue use immediately and contact technical support. Do not attempt unauthorized repairs.
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Fieryzeal |
| Model Number | 60W Moving Head Light |
| Item Type | Moving head light |
| Occasion | Professional Stage & DJ |
| Voltage | 90-240V (Input: AC110-220V, 50-60HZ) |
| Power (W) | 60W |
| Light source | 1PCS 60W LED (White light, 8 gobos + 8 colors) |
| Angle of light | 12° |
| Color temperature | 8000K |
| Luminous Flux | 2000-82000 |
| Strobe | 1-18Hz |
| X-axis movement | 540° (accuracy 2.11°/step, fine-tuning 0.008°) |
| Y-axis movement | 210° (precision 1.05°/step, fine-tuning 0.004°) |
| Operation mode | Self-propelled, Sound control, Master-slave, DMX |
| Control channel | 9/11CH |
| Protocol | Standard DMX512 protocol |
| Data Connection | Three-core XLR input/output |
| Display | 4-digit digital display |
| Electronic dimming | 0-100% linear curve dimming |
| Protection grade | IP20 |
| Working environment | -20℃ to 40℃ |
| Remote controller | Wireless remote controller (10~30m range) |
| Net weight | 3.2kg |
| Dimensions (approx.) | 15.5cm (W) x 14.5cm (D) x 27.5cm (H) |
| Certification | CE, FCC, RoHS |
9. User Tips
- For best light effects, use the device in a dark or dimly lit environment.
- Experiment with different DMX channels and modes to discover the full range of lighting possibilities.
- When using sound-activated mode, ensure the microphone is not obstructed for optimal response to music.
- Regularly check all connections, especially DMX cables, for secure fit to prevent signal interruptions.
- Consider using multiple units in master-slave mode for synchronized and impactful lighting displays.
10. Warranty and Support
This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or repair inquiries, please contact the seller or authorized service center. Do not attempt to repair the device yourself, as this may void the warranty and cause further damage.
For further assistance, please refer to the contact information provided by your retailer or on the official Fieryzeal website.
11. Environmental Protection and Disposal
This symbol on the product indicates that it should not be disposed of with household waste in European Community countries. To support sustainable recycling and protect the environment and human health, please dispose of used electrical appliances at a designated collection center or contact your dealer for proper ecological recycling.
