1. Introduction
The Mortal Q2 Android TV Stick transforms your television into a smart entertainment hub, offering access to a wide range of apps, streaming services, and media content. Powered by Android 14.0, it features Wi-Fi 6, Bluetooth 5.0, and an Allwinner H313 processor for a smooth user experience.

Figure 1: Mortal Q2 Android TV Stick and its key features.
2. Package Contents
Please check the package for the following items:
- Mortal Q2 Android TV Stick
- Remote Control (IR or Voice Remote, depending on model)
- Power Adapter (5V 2A)
- HDMI Cable (or HDMI extender)
- IR Receiver Cable

Figure 2: Contents of the Mortal Q2 TV Stick package.
3. Hardware Overview
3.1. TV Stick Interface
Familiarize yourself with the ports and indicators on your TV stick:
- HDMI Port: Connects to your TV's HDMI input.
- LED Indicator: Shows the device's power status.
- IR Port: For connecting the external IR receiver cable.
- USB/Type-C Port (5V 2A): For power input.
- USB 3.0 Port: For connecting USB devices like flash drives or external keyboards.
- TF Card Slot: For expandable storage.

Figure 3: Mortal Q2 TV Stick interface diagram.
4. Setup Guide
4.1. Connecting the TV Stick
- Connect to TV: Plug the HDMI cable into the HDMI port of the TV Stick, then connect the other end to an available HDMI port on your television. If the TV stick connects directly to the TV without an HDMI cable, skip this step.
- Connect Power: Connect the power cable to the USB/Type-C port on the TV Stick, and plug the power adapter into a wall outlet. Ensure you use the provided 5V 2A power adapter.
- Connect IR Receiver: Plug the IR receiver cable into the IR port on the TV Stick. Position the IR receiver in a location where it has a clear line of sight to your remote control.
- Power On: Turn on your television and select the correct HDMI input source using your TV remote. The TV Stick should power on automatically.
4.2. Remote Control Battery Installation
Open the battery compartment on the back of your remote control and insert two AAA batteries (not included), ensuring correct polarity (+/-). Close the compartment securely.
5. Operating Instructions
5.1. Initial Setup
Upon first power-on, you will be guided through an initial setup process. Follow the on-screen instructions to:
- Select your language.
- Connect to your Wi-Fi network (see section 5.2).
- Sign in with your Google Account (recommended for full access to Google Play Store and services).
- Accept terms and conditions.
5.2. Wi-Fi Connection
- From the main screen, navigate to Settings.
- Select Network & Internet.
- Ensure Wi-Fi is turned on.
- Select your desired Wi-Fi network from the list.
- Enter the Wi-Fi password using the on-screen keyboard.
- Select Connect. Once connected, you can use the device normally.

Figure 4: The TV Stick supports dual-band Wi-Fi (2.4G & 5.8G) for stable connection.
5.3. Bluetooth Pairing (for Voice Remote Control)
If you have a voice remote control, it needs to be paired via Bluetooth:
- After successful startup, if there is no automatic voice pairing interface, press the Voice button on the remote control.
- Place the remote control close to the TV Stick.
- Press and hold the Voice button and OK buttons simultaneously for about 15 seconds.
- Release the buttons after the light on the remote control flashes. The pairing interface should exit, indicating successful Bluetooth pairing.
5.4. Using the Remote Control
The TV Stick may come with an IR remote or a Voice remote. Refer to the button layout for your specific remote:
Common Buttons:
- Power: Turns the TV Stick on or off.
- Navigation (Up, Down, Left, Right): Moves cursor or selection.
- OK: Confirms selection.
- Back/Return: Goes back to the previous screen.
- Home: Returns to the main home screen.
- Volume Up/Down: Adjusts audio volume.
- Mouse: Activates mouse pointer mode (if available).
- Netflix/YouTube: Dedicated buttons for quick access to these apps.
Voice Remote Specifics:
Press the Voice button (often with a microphone icon) to activate voice commands. Speak clearly into the remote. Examples include: