MICTUNING 7-inch & 9-inch Round LED Work Light Covers

Contents

MICTUNING 7-inch & 9-inch Round LED Work Light Covers Instruction Manual

Brand: MICTUNING | Model: 7-inch & 9-inch Round LED Work Light Covers

1. Introduction

Thank you for choosing MICTUNING LED Work Light Covers. These durable PU leather protective shells are designed to provide superior protection for your 7-inch and 9-inch round LED spot lights and projector lights. They safeguard your valuable lighting equipment from various environmental elements while adding a stylish look to your vehicle.

2. Features

  • Added Protection: Offers extra protection against scratches, rain, fog, dust, snow, and other outer damage to the light lens.
  • Cool Looking Cover: Features a unique MICTUNING logo, giving your vehicle a distinctive and enhanced appearance.
  • Easy to Install: Designed for a perfect fit, allowing for easy installation and removal. The secure fit prevents it from falling off even on bumpy roads.
  • Superior Durability: Constructed from premium PU leather, providing a soft touch, scratch resistance, dustproof, and shockproof qualities. It is built to withstand outdoor elements for long-lasting use.
  • Wide Application: Compatible with most 7-inch and 9-inch LED pods, LED cubes, fog lights, and work lights on the market.

Video: Overview of MICTUNING LED Work Light Covers, highlighting features and benefits.

3. Setup & Installation

Follow these simple steps to install the protective cover on your LED work light:

  1. Cover the Light: Gently slide the protective cover over the front of your LED work light, ensuring it fully encloses the lens and edges of the light housing.
  2. Tighten the Drawstring: Locate the drawstring at the back of the cover. Pull the drawstring firmly to secure the cover tightly around the light, preventing it from slipping off. Ensure the cord lock is engaged to hold the drawstring in place.
Diagram showing how to cover the light and tighten the drawstring

Image: Step-by-step visual guide for installing the protective cover.

Close-up of the drawstring mechanism on the light cover

Image: Detailed view of the drawstring and cord lock for secure fastening.

4. Operating Instructions

The MICTUNING LED Work Light Covers are designed for passive protection. Simply ensure the cover is properly fitted and the drawstring is tightened when your LED work lights are not in use, or when you need to protect them from environmental factors such as rain, dust, or snow. Remove the covers before operating the lights to prevent heat buildup and ensure proper light output.

Comparison of an LED light with and without the protective cover

Image: Visual demonstration of the protective cover in use versus an uncovered light.

Icons representing water-resistant, dustproof, and snowproof features of the cover

Image: Icons illustrating the water-resistant, dustproof, and snowproof capabilities of the cover.

5. Maintenance

  • Cleaning: To clean the cover, simply wipe it with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners, as these may damage the PU leather.
  • Drying: Allow the cover to air dry completely before re-installing it on your lights or storing it. Do not expose it to direct sunlight for prolonged periods or use artificial heat sources for drying.
  • Storage: When not in use for extended periods, store the cover in a cool, dry place away from direct sunlight and extreme temperatures to preserve its material integrity.

6. Troubleshooting

  • Cover does not fit properly: Ensure you have selected the correct size (7-inch or 9-inch) for your LED work light. Measure your light's diameter to confirm compatibility.
  • Cover falls off easily: Make sure the drawstring is pulled firmly and the cord lock is securely engaged. The cover should feel snug around the light.
  • Material appears damaged: Inspect the cover for any cuts or tears. While durable, extreme sharp objects or prolonged exposure to harsh conditions can cause damage.

7. Specifications

AttributeValue
Brand NameMICTUNING
TypeWork Light Cover
MaterialPremium PU Leather
Ingress ProtectionIP65
OriginMainland China

Dimensions:

SizeDiameterHeight
7-inch Cover7.3 inches2.04 inches
9-inch Cover9.1 inches2.04 inches
Diagram showing dimensions for 7-inch and 9-inch LED light covers

Image: Detailed dimensions for both 7-inch and 9-inch protective covers.

8. User Tips

  • Confirm Quantity: Always check the product options when purchasing to confirm if you are receiving a single cover or a pair, to ensure it matches your needs.
  • Pre-Fit Check: Before permanent use, perform a quick fit check to ensure the cover size matches your light perfectly.
  • Regular Inspection: Periodically check the drawstring and cover material for any signs of wear or damage, especially after off-road use or exposure to harsh weather.

9. Frequently Asked Questions (FAQ)

Q: Does this product come as a pair or a single unit?
A: The MICTUNING LED Work Light Covers are available in both single units and pairs. Please check the specific product options or listing details at the time of purchase to confirm the quantity included in your order.

10. Warranty and Support

MICTUNING products are designed for quality and durability. If you encounter any issues or have questions regarding your LED Work Light Covers, please contact the seller or MICTUNING customer support for assistance. Keep your purchase receipt as proof of purchase.

11. Additional Information

For more detailed information, including specific product diagrams and extended instructions, you may refer to the official User Manual (PDF) available at: MICTUNING LED Work Light Cover User Manual (PDF).

© 2024 MICTUNING. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.