Heltecbms 4S 3.2V 40A/60A/80A/120A BMS

Contents

Heltecbms 4S 3.2V LiFePO4 BMS Instruction Manual

Models: 4S 40A, 4S 60A, 4S 80A, 4S 120A

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Heltecbms 4S 3.2V LiFePO4 Battery Management System (BMS). This intelligent protection balance board is designed for 3.2V Lithium Iron Phosphate (LiFePO4) batteries, offering active balancing and comprehensive protection features to ensure the safety and longevity of your battery pack.

The BMS supports various continuous current ratings including 40A, 60A, 80A, and 120A, making it suitable for a wide range of energy storage applications.

Heltecbms 4S 80A/120A 3.2V BMS with balance wires and mounting hardware
Heltecbms 4S 80A/120A 3.2V BMS with included accessories.

2. Specifications

FeatureDescription
Brand NameHeltecbms
TypeLIFEPO4 Battery BMS
Usage ScenarioEnergy Storage BMS
Battery Type3.2V LFP (Lithium Iron Phosphate)
Battery Strings4S
Connection PortSame port for Charge and Discharge
Continuous Current40A / 60A / 80A / 120A (Model Dependent)
Max Peak Current150A / 300A / 450A (Model Dependent)
Charge Protection Voltage3.65V
Charge Release Voltage3.55V
Discharge Protection Voltage2.35V
Discharge Release Voltage2.55V
Balanced Voltage3.405V
Balanced Current80mA
Balance FunctionPassive Balanced BMS (Active Equalization Technology)
Short Circuit ProtectionProtection, disconnect load, and self-recovery
Operating Temperature-30°C to 90°C
Dimensions (approx.)72mm × 55mm × 5mm
CertificationCE
High-concerned chemicalNone
OriginMainland China

Product Parameters Table (JK-BMS Models)

The following table provides a quick overview of various JK-BMS models and their specifications, including supported battery types, string numbers, equilibrium methods, and current ratings.

Table of Product Parameters for various JK-BMS models, detailing supported battery types, string numbers, equilibrium current, continuous current, instantaneous current, operating temperature, and optional features.
Detailed specifications for various JK-BMS models.

3. Package Contents

Upon receiving your Heltecbms 4S 3.2V LiFePO4 BMS, please verify that all components are present and undamaged:

  • Heltecbms 4S 3.2V LiFePO4 BMS Board (selected current rating)
  • Balance Wires (red and black, with connector)
  • Mounting Hardware (nuts and bolts)
Heltecbms 4S 80A 3.2V BMS board with included balance wires
BMS board and balance wires.

4. Safety Information

Always exercise caution when working with batteries and electronic components. Improper installation or handling can lead to serious injury or damage to equipment.

  • Ensure all connections are correct before applying power.
  • Do not short-circuit the BMS or battery terminals.
  • Wear appropriate personal protective equipment (PPE), such as safety glasses and insulated gloves.
  • Keep the BMS away from moisture and extreme temperatures outside its operating range.
  • If you are unsure about any step, consult a qualified professional.

5. Setup Instructions

Follow these steps carefully to connect your Heltecbms to your LiFePO4 battery pack.

5.1. Wiring Diagram

The BMS uses a common port for both charging and discharging. Ensure correct polarity and connections as shown in the diagram below.

Wiring diagram for Heltecbms 4S 3.2V BMS showing connections for B+, B-, and P- terminals, and balance wires.
Wiring diagram for the 4S 3.2V BMS.
  • B+ (Battery Positive): Connect the main positive terminal of your 4S battery pack to the B+ terminal on the BMS.
  • B- (Battery Negative): Connect the main negative terminal of your 4S battery pack to the B- terminal on the BMS.
  • P- (Charge/Discharge Negative): This is the common negative terminal for both charging and discharging. Connect your charger's negative output and your load's negative input to the P- terminal.
  • Balance Wires: Connect the balance wires to the corresponding cell terminals on your battery pack, ensuring the correct order (B1, B2, B3, B4, etc.) as indicated on the BMS connector. The main positive wire of the balance lead should connect to the overall positive of the battery pack.

Important: Always connect the balance wires first, then the main B- and B+ wires. When disconnecting, disconnect the main wires first, then the balance wires.

6. Operation

The Heltecbms provides intelligent protection and active balancing for your LiFePO4 battery pack.

6.1. Active Equalization Technology

The BMS utilizes active equalization technology to transfer energy from high-voltage cells to low-voltage cells, ensuring that energy is only transferred and not consumed, leading to better cell balance and overall pack health.

Diagram illustrating active equalization technology where energy is transferred between battery cells to balance their charge levels.
Active Equalization Technology in action.

6.2. Eight Security Protection Features

Your Heltecbms is equipped with comprehensive protection mechanisms:

  • Charge overcurrent protection
  • Charge overvoltage protection
  • Charge over temperature protection
  • Low temperature protection during charge
  • Discharge overcurrent protection
  • Discharge undervoltage protection
  • Discharge over temperature protection
  • Short circuit protection
Infographic showing eight security protection features of the BMS, including overcurrent, overvoltage, over/under temperature, and short circuit protection for both charge and discharge cycles.
Overview of the eight security protection features.

6.3. APP Bluetooth Remote Operation (Optional)

For models supporting APP/Bluetooth, you can monitor and control your battery pack remotely using a mobile application. This feature supports Apple/Android systems and allows switching between Chinese and English for convenience.

Screenshot of a mobile app interface showing battery parameters and controls, demonstrating Bluetooth remote operation for the BMS.
Mobile phone Bluetooth APP interface for remote monitoring.

6.4. Data Visualization (Optional)

Depending on your needs, you can choose methods like a mobile APP, computer upper computer (with optional RS485/CAN), or a dedicated display screen to visualize key battery data. These options offer user-friendly interfaces and concise parameter displays.

Diagram showing different data visualization options for the BMS, including a mobile app, a computer interface (optional RS485/CAN), and an external display screen.
Various data visualization methods for the BMS.

6.5. Cold-resistant and Heat-resistant

The BMS is designed to operate reliably across a wide temperature range, from -30°C to 90°C, ensuring normal discharge performance even in challenging environments.

Image depicting the BMS operating in extreme cold (-30°C) and hot (90°C) environments, highlighting its temperature resistance.
BMS operating effectively in extreme temperatures.

6.6. Reserve GPS Interface (Optional)

Some models may include a reserved GPS interface, allowing for optional GPS equipment to achieve real-time battery positioning, remote monitoring, and electronic anti-theft capabilities.

Image showing a battery pack with a BMS and a GPS icon, indicating real-time monitoring of battery location for anti-theft and tracking purposes.
GPS interface for real-time battery location monitoring.

6.7. Multi-scenario Applications

The Heltecbms is suitable for a variety of applications, including:

  • Electric bicycles
  • Electric tricycles
  • Electric vehicles
  • RVs
  • Sightseeing vehicles
  • Forklifts
  • Low-speed vehicles
  • Photovoltaic energy storage systems
  • Emergency UPS systems
Collage of various vehicles and energy storage systems, including electric bikes, RVs, forklifts, and solar energy storage, demonstrating the multi-scenario applications of the BMS.
Diverse applications for the Heltecbms.

7. Troubleshooting

If you encounter issues with your BMS, consider the following:

  • Short Circuit Protection: In case of a load short circuit, the BMS will activate its protection mechanism, disconnecting the load. The system is designed for self-recovery once the short circuit is removed.
  • Voltage Imbalance: If cell voltages vary significantly, the active balancing feature should work to equalize them over time. If imbalance persists, check balance wire connections.
  • BMS Not Functioning: Ensure all wiring is correct and secure. A short circuit, even momentary, can damage the BMS.

8. User Tips

  • Initial Balancing: While the BMS provides active balancing, for new battery packs, it can be beneficial to pre-balance cells as closely as possible before connecting the BMS for optimal performance.
  • Current Ratings: Be mindful of the continuous and peak current ratings of your specific BMS model. If using a 40A BMS, it may be more reliable to operate it with continuous loads slightly below 40A, as protection can kick in at the rated limit.
  • Avoid Short Circuits: Even a brief short circuit can damage the BMS. Always double-check wiring and connections before applying power.
  • Balance Current: The balance current of 80mA is suitable for many applications, but for very large capacity cells or significant initial imbalances, it may take time to achieve full balance.

9. Maintenance

The Heltecbms is designed for low maintenance. However, regular checks can help ensure its longevity and optimal performance:

  • Periodically inspect all wiring for signs of wear, corrosion, or loose connections.
  • Keep the BMS clean and free from dust and debris.
  • Ensure adequate ventilation around the BMS, especially during high current operation, to prevent overheating.
  • Monitor battery cell voltages occasionally, especially if using the optional APP or display, to confirm proper balancing.

10. Warranty & Support

For detailed warranty information and technical support, please refer to the official Heltecbms website or contact your vendor. A user manual in PDF format is also available for download:

Download User Manual (PDF)

For further assistance, you may also refer to the product video demonstrating the manufacturing and testing process:

Video showcasing the manufacturing and testing process of the BMS.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.