Introduction
Thank you for choosing the Mornwell Water Flosser. This device is designed to provide effective oral hygiene, reaching areas traditional brushing and flossing may miss. With its advanced features, including multiple cleaning modes, adjustable pressure settings, and a portable design, it helps maintain optimal oral health. Please read this manual thoroughly before use to ensure safe and proper operation.
Important Safeguards
READ ALL INSTRUCTIONS BEFORE USING
All information in this section is provided to instruct you in the correct and safe operation of this device so that you can avoid injuries to yourself and others, as well as damage to property.
- Do not immerse the device in water for extended periods.
- Do not use the device if it has been dropped or damaged.
- Do not use the device with water hotter than 40°C (104°F).
- Keep out of reach of children.
- Do not use the device for purposes other than oral cleaning.
- Ensure the charging port cover is securely closed when not charging to maintain water resistance.
- If you have any medical concerns, consult your dentist before using this device.
Package Contents
Please check the package contents upon unboxing:
- Host (Main Unit) x 1
- Standard Nozzle x 2
- Ultrasonic Tip x 1
- Tongue Cleaner Tip x 1
- Curved Nozzle x 1
- USB Charging Cable x 1
- Instruction Manual x 1
Product Overview
Familiarize yourself with the components of your Mornwell Water Flosser:

Image: Diagram of the Mornwell Water Flosser with its main parts labeled for easy identification.
- Nozzle
- On/Off Button
- Push-button Pressure Control
- Mode Button
- Mode Indicator
- Charging Indicator
- Water Tank
- Nozzle Release Button
Note: There may be some liquid remaining inside the main appliance before use (tank, water suction tube, etc.). This is distilled water used for performance testing and poses no health concerns.
Setup
1. Attaching the Nozzle
Insert the desired nozzle into the opening at the top of the main unit until it clicks into place. To remove, press the Nozzle Release Button and pull the nozzle out.

Image: The Mornwell Water Flosser shown with its five multifunctional jet nozzles and the 360° rotatable nozzle feature.
2. Filling the Water Tank
The Mornwell Water Flosser features a 300ML removable water tank for easy refilling and cleaning. You have two ways to open it:
- From the Bottom: Press the button at the bottom of the tank to release and detach it.
- From the Middle: The tank can also be separated from the middle section of the device.
Open the water tank cap and fill the tank with water. Ensure the water temperature does not exceed 40°C (104°F). Close the cap securely after filling.

Image: Visual guide demonstrating two methods to open the water tank: by pressing a button at the bottom or by detaching the middle section.
Operating Instructions
Before starting, ensure the water tank is filled and a nozzle is attached.
- Hold the unit in an upright position with the nozzle tip pointed towards your teeth.
- Keep your mouth slightly open so that the water can flow out into the sink.
- Press the On/Off button to start irrigating.
- Guide the water jet along your gumline and between your teeth.
Video: Official product demonstration showing the water flosser in action, highlighting its features and ease of use.
Cleaning Modes and Pressure Settings
Your Mornwell Water Flosser offers 5 cleaning modes and 3 adjustable intensity levels, providing 15 pressure settings to suit various oral care needs.

Image: Visual representation of the 15 pressure settings, detailing 5 modes (Soft, Normal, Shoot, Pulse, Custom) and their corresponding PSI ranges for effective cleaning.
To select a mode, press the Mode Button. You can change the working mode during irrigation.
- Soft (50-60 PSI): For daily cleaning and sensitive teeth, ideal for gentle cleaning of sensitive gums.
- Normal (60-80 PSI): For effective daily cleaning of teeth.
- Shoot (50-70 PSI): Suitable for braces and dentures, for cleaning and massaging the gums.
- Pulse (110 PSI): For gum protection and daily cleaning, providing a pulsating massage.
- Custom (50-90 PSI): Allows for customized selection of 5 water pressures. To adjust, press and hold the Mode Button for 3 seconds (do not release). The LED light will flash, and the water pressure will increase one level (level 1-8) with every press. Release the Mode Button to select the desired pressure.

Image: Diagram illustrating the 5 cleaning modes and 3 adjustable intensity levels, suitable for all ages and sensitivities.
Charging the Device
The Mornwell Water Flosser is USB rechargeable and features a long-lasting battery.
- Take the charging port cover down and insert the USB charging cable securely into the appliance socket. Ensure no liquid remains inside the socket before inserting the plug.
- Plug the other end of the USB cable into a power source such as a power bank, car charger, PC, or phone charger.
- The