1. Introduction
The ATK VXE MAD R MAJOR Gaming Mouse is a high-performance, hole-less lightweight gaming mouse designed for precision and speed. It features advanced PixArt sensors, a Nordic flagship chip, and supports high polling rates for an ultra-low latency gaming experience. This manual provides essential information for setting up, operating, and maintaining your gaming mouse.
2. Components and Accessories
Familiarize yourself with the various parts of your ATK VXE MAD R MAJOR Gaming Mouse and its included accessories.
Mouse Components:
- Type-C Port
- Left Mouse Button
- Right Mouse Button
- Scroll Wheel
- LED Indicator
- Forward Button
- Back Button
- Power Switch
- DPI Button
- Receiver Storage Slot
- Optical Sensor
- Feet
Included Accessories:
- Data Cable (Type-C)
- Mouse Feet (pre-installed or additional set)
3. Setup Guide
Follow these steps to get your ATK VXE MAD R MAJOR Gaming Mouse ready for use.
3.1. Charging and Wired Mode
To charge your mouse or use it in wired mode, connect the provided Type-C cable to the mouse's Type-C port and to a USB port on your computer. The mouse has a rating of 5V 200mA.
3.2. Wireless Mode (2.4GHz Receiver)
For wireless operation, locate the 2.4GHz receiver in the storage slot on the underside of the mouse. Plug the receiver into an available USB port on your computer. The recommended operating distance is less than 2 meters, with a maximum range of 10 meters.
3.3. Bluetooth Pairing
To pair your mouse via Bluetooth:
- Ensure the mouse is powered on and in Bluetooth mode (if applicable, check the power switch on the underside).
- Press and hold the Left, Middle (scroll wheel click), and Right mouse buttons simultaneously until the LED indicator light flashes. This indicates the mouse is in Bluetooth pairing mode.
- On your computer or device, go to Bluetooth settings and select the ATK VXE MAD R MAJOR mouse to pair.
4. Operation
4.1. DPI Adjustment
You can quickly switch DPI settings by pressing the DPI button located on the underside of the mouse. The default DPI settings are indicated by the LED color:
- Red: 400 DPI
- Green: 800 DPI
- Blue: 1600 DPI
- Purple: 3200 DPI
For more precise DPI adjustments (from 100 to 18000 DPI), use the ATK V HUB software.
4.2. Polling Rate Settings
The polling rate can be configured using the ATK V HUB software. The MAD R models support 1000Hz polling rate in wired mode and 8000Hz in wireless mode. The MAD R MAJOR models support a dual 8000Hz polling rate in both wired and wireless modes.
4.3. Battery Status Indication
The LED indicator provides information about the mouse's battery status:
- Red Blinking: Battery is below 10%, please charge.
- Yellow Blinking: Mouse is currently charging.
- Solid Green: Charging is complete.
4.4. ATK V HUB Software
The ATK V HUB software provides all-in-one device management, allowing you to customize mouse performance, remap buttons, set macros, and more. It supports both ATK HUB Driver and ATK Web HUB Driver.
5. Specifications
Below are the detailed specifications for the ATK VXE MAD R and MAD R MAJOR series gaming mice.
| Feature | MAD R | MAD R+ | MAD R MAJOR | MAD R MAJOR+ |
|---|---|---|---|---|
| Dimension | 120.1mm × 63.2mm × 38.1mm | |||
| Coating | Smooth Ice-feeling Coating | |||
| Sensor | PAW 3395 | PAW 3950 Standard | ||
| Chip | Nordic nRF52840 | |||
| Transmission Technology | Smart Speed X Wireless | |||
| Polling Rate | Wired 1K + Wireless 8K | Dual 8K (Wired/Wireless) | ||
| Battery | 200mAh | 500mAh | 200mAh | 500mAh |
| Weight | 36±3g | 42±3g | 36±3g | 42±3g |
| Connection Method | Wired / Wireless | |||
| Scroll Wheel | F-Switch E10A2 | |||
| Microswitch | Omron Optical Microswitches | |||
| Acceleration | 50 G | |||
| IPS | Up to 750 IPS | |||
| Number of Rollers | 1 pcs | |||
| Hand Orientation | Right | |||
| Interface Type | USB | |||
| Number of Buttons | 4 | |||
| Operation Mode | Opto-electronic | |||
| Certification | CE, FCC | |||
Minimum Recommended PC Hardware Requirements:
- INTEL: CPU: Intel i7-9700K or higher, Graphics Card: NVIDIA RTX 2060 or higher, Memory: 16GB or more, Monitor: Screen refresh rate of 240Hz or higher.
- AMD: CPU: Ryzen 5 3600X or higher, Graphics Card: AMD RX 5700 XT or higher, Memory: 16GB or more, Monitor: Screen refresh rate of 240Hz or higher.
6. Maintenance
To ensure the longevity and optimal performance of your gaming mouse, follow these maintenance guidelines:
- Cleaning: The mouse features a smooth ice-feeling coating that is stain-resistant and easy to clean. Use a soft, dry cloth to wipe down the mouse regularly. For stubborn dirt, a slightly damp cloth with mild soap can be used, but ensure no liquid enters the mouse.
- Storage: When not in use, store the mouse in a clean, dry environment away from direct sunlight and extreme temperatures.
- Battery Care: Avoid fully discharging the battery frequently. Charge the mouse when the LED indicator shows low battery.
7. Troubleshooting
If you encounter any issues with your ATK VXE MAD R MAJOR Gaming Mouse, refer to the following common problems and solutions:
- Mouse Wobbling/Uneven Base: Check the mouse feet for any damage or unevenness. If the base feels uneven, gently check if the screws are properly tightened. Avoid over-tightening.
- Sensor Freezing or Stuttering: This can often be resolved by updating the mouse firmware. Ensure the 2.4GHz receiver has a clear line of sight to the mouse and is within the recommended operating distance (<2m). Avoid interference from other wireless devices.
- Connectivity Issues: If the mouse is not connecting wirelessly, try re-pairing it via Bluetooth or re-inserting the 2.4GHz receiver. Ensure the power switch is in the correct position for your desired connection method.
- Difficulty Removing Bottom Label/Adhesive Residue: If the protective label on the bottom leaves residue, use a small amount of adhesive remover (e.g., isopropyl alcohol on a cotton swab) carefully, avoiding contact with the optical sensor or other internal components.
8. User Tips
Here are some tips from other users to enhance your experience with the ATK VXE MAD R MAJOR Gaming Mouse:
- Firmware Update: Always update the mouse firmware immediately after unboxing to ensure optimal performance and access to the latest features.
- Ergonomics: The mouse is designed to be comfortable for both claw and palm grips, even for smaller hands. Experiment with your grip style to find what works best for you.
- Grip Tape: For specific gaming styles like drag clicking, consider using grip tape for improved control, although the smooth coating generally provides good grip without it.
- Software Customization: Utilize the ATK V HUB software to fine-tune DPI, polling rate, button assignments, and macros to match your personal preferences and gaming needs.
9. Warranty and Support
For detailed warranty information, technical support, and the latest product updates, please refer to the official ATK website or the comprehensive user manual available in PDF format. The PDF manual can be viewed here.