1. Introduction
The XinYi Sini Audio XY-T2002P is a high-performance Bluetooth 5.2 power audio stereo amplifier board designed to deliver a clear and delicate audio experience. Featuring the TPA3223 chip, it supports up to 200W + 200W output power and offers multiple audio input methods including Bluetooth, AUX, USB flash drive, and USB sound card. This manual provides detailed instructions for assembly, setup, operation, and maintenance of your amplifier board.
2. Safety Information
- Ensure the power supply voltage is within the specified DC12-42V range. Using an incorrect voltage can damage the device.
- Always disconnect power before making any connections or disconnections.
- Avoid exposing the device to moisture, extreme temperatures, or direct sunlight.
- Do not attempt to modify or repair the device yourself. Refer to qualified personnel for service.
- Keep out of reach of children.
3. Package Contents
The product is shipped unassembled, and accessories need to be assembled by yourself. A screwdriver is included as a gift.
- 1x XY-T2002P 2*200W TPA3223 Bluetooth 5.2 Power Audio Stereo Amplifier Board
- Knobs for Volume, Bass, and Treble control
- Standoffs and screws for assembly
- 1x Screwdriver

4. Product Overview
The XY-T2002P amplifier board is designed for versatile audio applications, featuring high-quality components for superior sound. It comes in different versions, including integrated potentiometer, external potentiometer, and integrated panel versions.



4.1. Ports and Controls
- DC 12-42V Power Input: For connecting the power supply.
- Speaker Outputs (L+/L-, R+/R-): For connecting passive speakers.
- AUX Input: 3.5mm jack for wired audio input.
- USB Audio Port: For connecting a USB flash drive or using the board as a USB sound card.
- Power Switch: ON/OFF toggle.
- Multifunction Knob (VOL): Controls volume, and acts as a multi-function button for playback and mode switching.
- Treble Knob (TRE): Adjusts high frequencies.
- Bass Knob (BASS): Adjusts low frequencies.
- Bluetooth Indicator: Blinks during pairing, solid when connected.
5. Specifications
| Parameter | Value |
|---|---|
| Product Name | BT Digital Audio Amplifier Board |
| Product Model | XY-T2002P |
| Power Supply | DC12-42V / 5A or above |
| BT Version | 5.2 |
| Audio Input | BT / AUX / U disk / USB sound card |
| BT Audio Decoding | AACSBC |
| USB Lossless Decoding | WAV FLAC APE MP3 |
| Output Power (L+R) | 10W+10W @8Ω/12VDC 20W+20W @4Ω/12VDC 35W+35W @8Ω/24VDC 70W+70W @4Ω/24VDC 80W+80W @8Ω/36VDC 160W+160W @4Ω/36VDC 100W+100W @8Ω/42VDC 200W+200W @4Ω/42VDC |
| Dimensions (Integrated Panel Version) | 134mm x 90mm x 34mm (5.28in x 3.54in x 1.34in) |
| Dimensions (Integrated Potentiometer Version) | 134mm x 90mm x 28mm |
| Dimensions (External Potentiometer Version) | 115mm x 90mm x 28mm (Potentiometer connection cable 20cm long) |
| Knob Size | 17mm / 0.67in |


6. Setup
The XY-T2002P amplifier board requires self-assembly. Follow these steps carefully:
- Assembly: Assemble the amplifier board with the provided standoffs and screws. If you have the external potentiometer version, connect the potentiometer controls using the provided cables.
- Connect Speakers: Connect your passive speakers to the speaker terminals (L+/L- for left, R+/R- for right). Ensure correct polarity.
- Connect Power: Connect a DC 12-42V power supply (5.5-2.5mm DC jack) to the power input port.
7. Operating Instructions
- Power On/Off: Toggle the ON/OFF switch. The indicator light will blink upon powering on.
- Audio Input Selection: The amplifier supports Bluetooth, AUX, USB disk, and USB sound card inputs. Use the multifunction knob (four clicks) to cycle through input modes.
- Bluetooth Pairing:
- Turn on the amplifier. The Bluetooth indicator will blink, indicating it's in pairing mode.
- On your device (e.g., smartphone), enable Bluetooth and search for available devices.
- Select "XinYi" from the list to pair. Once connected, the indicator will stop blinking.
- USB Disk Playback: Insert a USB flash drive containing WAV, FLAC, APE, or MP3 audio files into the USB Audio port. The amplifier will automatically switch to USB mode and begin playback.
- USB Sound Card Mode: Connect the amplifier to a computer via the USB Audio port. The computer should recognize it as an audio output device.
- AUX Input: Connect an audio source to the 3.5mm AUX input jack.
- Volume Control: Turn the "VOL" knob clockwise to increase volume and counter-clockwise to decrease.
- Bass/Treble Adjustment: Use the "BASS" and "TRE" knobs to adjust the low and high frequencies respectively.
- Playback Control (Multifunction Knob):
- Click: Pause/Play
- Double-click: Next track
- Triple-click: Previous track
8. Maintenance
- Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning.
- Ensure proper ventilation around the heatsink to prevent overheating.
- Store the device in a cool, dry place when not in use.
- Avoid strong impacts or vibrations.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Incorrect power supply voltage or connection. | Verify power supply is DC12-42V and correctly connected. Check power switch position. |
| No sound output | Speakers not connected, incorrect input mode, low volume, or faulty audio source. | Check speaker connections and polarity. Ensure correct audio input mode is selected. Increase volume. Test with a different audio source. |
| Bluetooth not pairing | Amplifier not in pairing mode, device Bluetooth off, or too far from amplifier. | Ensure amplifier is in Bluetooth mode (indicator blinking). Turn on Bluetooth on your device. Move device closer to the amplifier. |
| Distorted sound | Volume too high, faulty speakers, or poor audio source quality. | Reduce volume. Test with different speakers or audio source. Check audio cables for damage. |
10. User Tips
- When assembling, ensure all screws are tightened securely but do not overtighten to avoid damaging the board.
- For optimal sound quality, use high-quality audio cables and a stable power supply.
- Experiment with the Bass and Treble knobs to find your preferred sound profile for different music genres.
11. Warranty & Support
For detailed warranty information and further support, please refer to the official user manual PDF available at: User Manual (PDF).