1. Product Overview
The ZOHAN 054(EM026) Electronic Earmuffs are designed to provide superior hearing protection in noisy environments while enhancing situational awareness. These earmuffs feature sound amplification for low-level sounds and automatic noise reduction for hazardous impulse noises.

Figure 1: ZOHAN 054(EM026) Electronic Earmuffs in various colors.
2. Package Contents
Please ensure all items are present upon unboxing:
- ZOHAN 054(EM026) Electronic Earmuffs
- 3.5mm Audio Connection Cord
- User Manual (this document)
3. Components Identification
Familiarize yourself with the parts of your ZOHAN Electronic Earmuffs:

Figure 2: Product Details and Components
- Adjustable Telescopic Rod
- Padded Headband (PU leather Foam)
- On/Off Switch / Volume Control
- Battery Compartment (operates on 2 AAA batteries, not included)
- Snap-in Replaceable Ear Cushions
- Audio Input Jack (Aux Jack)
- Cutaway-Design Ear Cups
- Omnidirectional Microphone
4. Setup
4.1. Battery Installation
The battery compartment is located in the left ear cup.
- Lift open the BATTERY COVER using the tab at the bottom of the ear cup.
- Insert TWO (2) HEAVY DUTY AAA BATTERIES, ensuring the correct polarity (+/-) as indicated by the diagram inside the battery compartment. Incorrectly installed batteries can damage the unit.
- Close the BATTERY COMPARTMENT by placing the cover over the compartment and snapping it into place.
Note: Only use 1.5V rated batteries (rechargeable or non-rechargeable). Using 1.2V rechargeable batteries (NiMH/NiCd) will significantly reduce operating time. Turn off the device during battery replacement.
4.2. Wearing Instructions
- Prepare Earmuffs: Pull the ear cups apart just enough to clear your ears.
- Position on Head: Place the earmuffs on your head, ensuring both ears are securely covered by the ear cups.
- Adjust for Fit: Extend or retract the adjustable telescopic rods to adjust the ear cup position and ensure a snug, comfortable fit around your head and ears.
- Ensure Seal: Make sure the ear cushions seal tightly against your head. Brush any hair from beneath the cushions. Avoid placing foreign objects (e.g., pencils, glasses with thick temples) between the ear cup and your head, as this can reduce effectiveness. Use glasses with the smallest possible temple (cable type is best).
5. Operating Instructions
5.1. Power On/Off and Volume Control
Use the On/Off Switch / Volume Control knob (Component 3) located on the ear cup to:
- Turn the earmuffs ON or OFF.
- Adjust the desired listening volume for sound amplification.
5.2. Sound Amplification and Noise Reduction
The earmuffs are designed to amplify low-level sounds for improved communication and situational awareness, while instantly compressing hazardous noises.

Figure 3: Noise Reduction and Sound Amplification
- Noise Reduction: When sound levels exceed 82 dB, the earmuffs provide instant noise compression with a reaction time of 0.1 seconds.
- Sound Amplification: Sounds below 82 dB are amplified, allowing for clear communication and awareness of your surroundings.
5.3. Headphone Functionality
The earmuffs include an audio input jack (Aux Jack) and a 3.5mm connection cord for connecting to external audio devices.

Figure 4: Headphone Functionality with Aux Jack
Connect the provided 3.5mm audio cord from your MP3 player, scanner, or other audio device to the Aux Jack on the earmuffs to use them as headphones.
5.4. Intended Use
These earmuffs are suitable for various activities requiring hearing protection and enhanced audio awareness:

Figure 5: Applications of ZOHAN Electronic Earmuffs
- Hunting
- Shooting (at ranges or in the field)
- Construction
- Sports and Outdoor Activities
- Communication in noisy environments
- Group shooting activities and training exercises
6. Important Safety Information & Warnings
- General Use: This hearing protector is designed to reduce exposure to harmful levels of noise. Read this User Instruction Manual carefully before operating.
- Fit and Seal: Ensure ear cushions seal tightly against your head. Any gaps or foreign objects will reduce effectiveness.
- Damage: Do not insert any foreign body into your headset. Do not allow any liquid to enter. If immersed in water or exposed to prolonged heavy rain, have the electronics checked by a professional.
- Cleaning: Do not use detergents or harsh chemicals. Refer to the Maintenance section for proper cleaning.
- Inspection: Regularly inspect your headset for damage. Do not use if damaged; have it checked and repaired by a professional.
- Movement: If earmuffs move or get caught (e.g., in branches), reposition them to ensure continued effectiveness.
- Performance: Performance may deteriorate with battery usage. Check correct operation of level-dependent attenuation before use. If distortion or failure is detected, refer to manufacturer advice for maintenance and battery replacement.
- Audio Output: The output of the electrical audio circuit of this hearing protector may exceed the daily limit sound level. Use responsibly.
- Noise Levels: This product is not suited for high continuous noise levels.
- Children: Not for children under 3 years.
- Volume: Do not listen at high volume levels for long periods.
- Flammable/Explosive Atmospheres: These earmuffs contain batteries and electrical components that may cause ignition in flammable or explosive atmospheres. DO NOT use in environments where sparks may cause a fire or explosion.
- Driving: DO NOT use the radio function (if applicable) while driving an automobile or bike.
- Noisy Environments: In noisy environments, the ear-muffs must be worn in the working position at all times to ensure hearing protection.
7. Maintenance
7.1. Hygiene Kit (Ear Cushions and Inserts)
The ear cushions and foam inserts are replaceable. Always replace worn or damaged parts with genuine ZOHAN hygiene kits. To replace, pull the old cushion straight out and insert new ones.
7.2. Regular Inspection
Inspect the earmuffs regularly for serviceability. Pay close attention to the cushions for any signs of cracking or leakage, especially at the start of every work shift.7.3. Cleaning
Clean and disinfect the ear cups, cushions, and inserts with mild soap and water only. The earmuffs must NOT be immersed in water.
7.4. Drying
After use, moisture may accumulate inside the ear cups. To avoid moisture damage to electronic components, regularly remove the acoustic foam and allow the ear cups and contents to dry thoroughly. Do not touch the electronics board or cables during this process. Once dry, reinstall the acoustic foam to completely cover the electronics.
7.5. Storage
When not in use, store the earmuffs without stretching the headband or compressing the cushions. Ensure cushions lie flat against each other without creases. Keep them dry and clean, at normal room temperature, away from dust and direct sunlight. For prolonged storage, remove batteries to prevent damage.
7.6. Chemical Substances
This product may be adversely affected by certain chemical substances. For further information, contact the manufacturer.
7.7. Handling and Disposal
Do not subject the product to rough handling, which can damage the electronics. Dispose of the product and batteries in accordance with national and local regulations.
8. Troubleshooting
- No Power: Ensure batteries are correctly installed with proper polarity and are not depleted. Replace with fresh AAA batteries if necessary.
- No Sound Amplification/Distorted Sound: Check battery level. If sound is distorted or intermittent, replace batteries. Ensure ear cups are properly sealed against your head.
- Poor Noise Reduction: Verify that the earmuffs are worn correctly and create a tight seal around your ears. Ensure no hair or other objects are breaking the seal.
- Audio Input Issues: Check the 3.5mm audio cable for damage and ensure it is securely connected to both the earmuffs and the external audio device.
- General Malfunction: If distortion or failure is detected that cannot be resolved by the above steps, refer to the manufacturer's advice for maintenance or replacement.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | 054(EM026) |
| Brand Name | ZOHAN |
| Product Type | Tactical Electronic Shooting Earmuffs |
| Noise Reduction Rating (SNR) | 27 dB (EN 352-1:2020) |
| Noise Reduction Rating (NRR) | 22 dB (as per product image) |
| Reaction Time | 0.1 seconds (for noise compression > 82 dB) |
| Battery Type | 2 x AAA (not included) |
| Weight | 263.4 grams |
| Service Life | 1 year |
| Operating Temperature | -20°C to +50°C |
| Materials (Cup/Cover) | ABS |
| Materials (Headband) | Acetal, Nylon |
| Materials (Cushions) | Polyurethane, PVC |
| Materials (Attention Foam) | Polyurethane |
| Certification | CE (EN352-1:2020, EN352-4:2020, EN352-6:2020), EPA |
| Package Dimensions | 14cm (L) x 14cm (W) x 12cm (H) |
| Package Weight | 0.4 kg |
9.1. Attenuation Data (SNR 27dB)
| Test Frequency (Hz) | 125 | 250 | 500 | 1000 | 2000 | 4000 | 8000 |
|---|---|---|---|---|---|---|---|
| Mitigation Average (dB) | 15.6 | 17.2 | 21.9 | 28.3 | 32.8 | 39.8 | 39.0 |
| Standard Deviation (dB) | 2.3 | 2.5 | 2.2 | 2.7 | 3.3 | 2.8 | 3.1 |
| MEAN-SD | 13.3 | 14.7 | 19.7 | 25.6 | 29.5 | 37.1 | 35.9 |
Criterion Levels: The sound pressure level of external sound for which the sound pressure level under the ear-muff first exceeds 82 dB(A).
10. User Tips
- Optimal Seal: For the best sound isolation and noise reduction, always ensure the ear cups completely cover your ears and form a tight seal. Adjust the headband carefully.
- Pre-Use Check: Before using at a shooting range or in other high-noise environments, perform a quick function check to ensure sound amplification and noise reduction are working as expected.
- Battery Life: Keep spare AAA batteries handy, especially for extended use, as performance can diminish with low battery levels.
11. Warranty & Support
11.1. Limited Warranty
ZOHAN warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of 2 years from the date of purchase. Under this warranty, the unit will be replaced at ZOHAN's option. A copy of the original receipt or gift receipt is required for any warranty service.
11.2. Customer Service
For warranty service or any questions, please contact our Customer Service Group:
- Email: support@zohantech.com
11.3. Manufacturer Information
- Manufacturer: Hangzhou ZH Tech Co., Ltd.
- Address: No.6 Shunle Road, Yuhang, Hangzhou, P.R. China
11.4. EU Declaration of Conformity
This product meets the Basic Safety Requirements of the European Community regulations. The certificates are issued by Notified Body 2834, CCQS Certification Services Limited, Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin 15 D15 AKK1 Dublin Country: Ireland.
For the EU Declaration of Conformity, please visit: www.zhsafetech.com
A PDF version of the user manual may also be available for download from the manufacturer's website.