Kunray KR72V100A NS18

Contents

Kunray Fardriver Controller KR72V100A NS18 User Manual

Model: KR72V100A NS18 | Brand: Kunray

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Kunray Fardriver Controller KR72V100A NS18. This high-power brushless controller is designed for electric bikes and motorcycles, offering robust performance and programmable features via Bluetooth. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Specifications

2.1 General Parameters

ParameterValue
Current100A
Rated Voltage48-72V
Net Weight1.9KG
Protect Phase Current300A
Adapter Motor3-5KW
IP ClassIP67
TypeBrushless Controller
OriginMainland China

2.2 Dimensions

The controller features a robust aluminum body with a new design heatsink for efficient cooling.

Dimensions of the Kunray Fardriver Controller KR72V100A NS18

Dimensions:

  • Height (H): 59.7 cm / 23.50 in
  • Width (W): 117.9 cm / 46.42 in
  • Length (L): 179.9 cm / 70.82 in
Key parameters of the Kunray Fardriver Controller

Image: Key parameters of the Kunray Fardriver Controller, including current, voltage, weight, phase current protection, adapter motor power, and IP class.

3. Package Contents

Your package should contain the following items:

  • Kunray Fardriver Controller KR72V100A NS18
  • Wiring Harness
  • Bluetooth Module (if not built-in)
  • Installation Screws (e.g., 2xM6, 4xM8 12mm)
Kunray Fardriver Controller with Bluetooth built-in and wiring harness

Image: The Kunray Fardriver Controller with its integrated Bluetooth and accompanying wiring harness.

4. Setup and Installation

4.1 Motor Installation

The motor is designed for easy installation. Ensure you use the correct screws for mounting.

  • The motor is suitable for T8F/25H sprockets.
  • Use 2xM6 screws for specific installation holes.
  • Use 4xM8 12mm screws for other installation holes.
Detailed wiring diagram for the Kunray Fardriver Controller

Image: Detailed wiring diagram showing connections for various functions including Anti-theft, E-lock, P/Cruise, High/Low speed, Throttle, Reverse, Brake (low-level), SPA, SPD, Hall, and Brake (high-level). Note: If the controller has built-in Bluetooth, the 'Bluetooth serial' connector is not used.

4.2 Wiring Instructions

Carefully connect the wiring harness to the controller and motor according to the diagram. Ensure all connections are secure to prevent electrical issues.

PicDescriptionFunctions
Black: GND, Orange: Lock, Black&white: Signal FW, Pink&red: Power + 60VC, Brown&red: Wheel smove signal UAnti-Theft
Brown: BOOST, Blue&red: Cruise XHP/Cruise
Yellow & white: High speed, Black: GND, Blue&white: Low speedHigh / Low Speed
Black: GND, Green & white: Throttle signal SV, Red & white: Powert + ACC+Throttle
Brown & white: Reverse RE, Black: GNDReverse
Yellow & green: Low level braking BL, Black: GNDBrake (low-level)
Red: Hall +, White: Temp, Black: GND, Blue: Hall C, Green: Hall B, Yellow: Hall AHall
Purple: Analog speedometer SPASpeedometer SPA
Light blue: LIN SPDSpeedometer SPD
Grey: High level braking BHBrake (high-level)
Orange: Power lock KEYE-Lock

4.3 Bluetooth Connectivity

The controller features built-in Bluetooth support, compatible with both Android and Apple devices. Download the Fardriver App to connect with the system and modify parameters.

Bluetooth support for the Kunray Fardriver Controller

Image: Illustration of the controller's Bluetooth built-in feature, indicating app compatibility for Android and Apple devices.

4.4 Installation Video Guide

Watch this video for a visual guide on the installation and testing process.

Video: A demonstration of the motor and controller installation, wiring, and basic functionality testing.

5. Operating Instructions

5.1 Power On/Off

Insert the key into the E-lock and turn it to the 'ON' position to power on the controller. The display will show the current voltage. Turn the key to 'OFF' to power off.

5.2 Speed Control

Use the throttle to control the motor speed. The controller supports high/low speed settings, which can be adjusted via the Fardriver App if needed.

5.3 Anti-Theft Function

The controller includes an anti-theft feature. Refer to the wiring diagram for proper connection of the anti-theft system. When activated, the motor will lock to prevent unauthorized movement.

6. Maintenance

  • Keep the controller clean and free from dust and moisture.
  • Regularly check all wiring connections for tightness and signs of wear.
  • Ensure the heatsink is not obstructed to allow for proper heat dissipation.
  • Avoid exposing the controller to extreme temperatures or direct sunlight for prolonged periods.
  • The IP67 rating indicates protection against dust and temporary immersion in water, but avoid intentional submersion.

7. Troubleshooting (BEEP ALARM)

The controller uses beep alarms to indicate various statuses and faults. Pay attention to the beep patterns to diagnose issues.

7.1 General Beep Patterns

  • Normal Startup: The buzzer will sound once and then stop.
  • Continuous Beep: Indicates both the brake and throttle are engaged simultaneously. The buzzer will sound when both are pressed and stop when either is released.
  • Two Short Beeps followed by One Long Beep (repeating cyclically): The controller is in self-learning mode. Follow the self-learning operation steps to complete the process.
  • Two Short Beeps, Brief Pause, One Short Beep (repeating cyclically): Indicates a controller program verification failure. The program must be upgraded.
  • Four Short Beeps, One Long Beep, Five Short Beeps (repeating cyclically): Indicates the upgraded program is incompatible with the controller. Verify the program matches the model number on the controller's label.

7.2 Fault Beep Codes

If the buzzer sounds between 1 and 15 times, the number of beeps corresponds to a specific fault:

Beep CountReason
1Motor Hall Sensor Fault
2Throttle Pedal Fault
3Current Protection Restart
4Phase Current Overflow
5Voltage Fault
6Anti-Theft Alarm Signal
7Motor Over-Temperature
8Controller Over-Temperature
9Phase Current Sudden Change
10Phase Current Zero Point Fault
11Phase Wire Short Circuit
12Line Current Zero Point Fault
13MOSFET Upper Bridge Fault
14MOSFET Lower Bridge Fault
15MOE Peak Line Current Protection

If you encounter an error and are unsure how to resolve it, please contact customer support.

8. User Tips

  • For optimal performance, ensure your motor is within the 3-5KW range recommended for this controller.
  • When connecting to a new brand motor, be prepared to test and adjust some parameters using the Fardriver App.
  • Always double-check all wiring connections before powering on the system to prevent damage.
  • If you experience any issues, consult the troubleshooting section first, paying close attention to the beep codes.

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official user manual PDF provided by the manufacturer. This document contains comprehensive details regarding product guarantees, service procedures, and contact information for assistance.

You can view the full user manual (PDF) here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.