1. Introduction
Thank you for choosing the FENGYIELE Customizable Metal Push Button Switch. This manual provides essential information for the safe and effective use of your new switch. Please read it thoroughly before installation and operation, and keep it for future reference.
These durable push button switches are designed for various applications, including automotive, marine, and other mechanical equipment, featuring customizable symbols and LED illumination.
2. Warning & Safety Information
- Use only as intended; follow operating instructions. Do not modify the product.
- Do not exceed rated voltage/current/power.
- Not suitable for wet locations; keep away from water.
- Keep out of reach of children; small parts may cause choking hazard.
- This product complies with applicable EU directives.
CE Certified
3. Product Overview
The FENGYIELE push button switch features a robust alloy construction, available in various sizes and LED colors. It supports both momentary (self-reset) and latching (self-locking) operation modes.
The switches come with a 15cm wire and socket for easy connection.
The light effect is soft and not dazzling, and clear engraving supports customization.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | FENGYIELE |
| Item Type | SWITCHES |
| Model Number | 16/19/22mm |
| Material | Alloy (Silver: brass, Black: aluminum) |
| Certification | CCC |
| Switch Type | Push Button Switch |
| Features | Customizable Metal Push Button Switch |
| Operation Method | Momentary self-reset / Latching self-locking |
| Hole Size | 16mm / 19mm / 22mm |
| Waterproof Level | IP65 |
| LED Voltage | 12-24V (Other voltages like 3V, 6V, 48V, 110V, 220V may be available upon request) |
| Current | 3-6V(5A), 12-24V(5A), 110-220V(3A) |
| LED Color Options | Red, Green, Yellow, Blue, White, Purple, Orange |
| Contact Type | 1NO1NC |
| Recommended Use | Car, Boat, Motorcycles, or other mechanical equipment |
| Connector | Switch with Socket |
| Terminals | 5 Pins |
5. Setup and Installation
5.1. Choosing Your Switch Size and Symbol
The switches are available in 16mm, 19mm, and 22mm hole sizes. Ensure you select the correct size for your application. For custom symbols, refer to the available options and note the serial number of the icon you require.
5.2. Wiring Diagram
The switch comes with a 5-pin socket and 15cm pre-attached wires. A basic wiring diagram is provided below for connecting the switch to a power source and a load (e.g., a light bulb).
For detailed wiring color codes, please refer to the product's specific documentation or contact the seller if not explicitly provided with your purchase.
5.3. Installation Steps
- Ensure all power is disconnected from the circuit before installation.
- Drill a hole of the appropriate size (16mm, 19mm, or 22mm) in your mounting surface.
- Insert the switch into the drilled hole and secure it with the provided nut.
- Connect the wires from the switch's socket to your power source and load according to the wiring diagram.
- Verify all connections are secure and correctly wired before restoring power.
6. Operating Instructions
These switches are available in two main operation methods:
- Momentary (Self-reset): The switch remains active only while pressed. It returns to its original state when released.
- Latching (Self-locking): The switch remains in its active state after being pressed and released. Pressing it again will return it to its original state.
The integrated LED illuminates when the switch is activated (or as wired for constant illumination, depending on your setup).
7. Maintenance
- Clean the switch surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Periodically check wiring connections for tightness and signs of wear.
- Ensure the switch is not exposed to excessive moisture or extreme temperatures beyond its IP65 rating.
8. Troubleshooting
- Switch not responding: Check all wiring connections. Ensure the power source is active and providing the correct voltage (12-24V for standard LED models). Verify the load (e.g., light bulb) is functional.
- LED not illuminating: Confirm the LED voltage matches your power supply. Check the LED's polarity if applicable (though typically pre-wired).
- Intermittent operation: Inspect for loose connections or damaged wires. Ensure the switch is rated for the current and voltage of your application.
- Defective unit: If a unit is found to be defective upon arrival or after proper installation, contact the seller for assistance.
9. User Tips
- Customization: When ordering custom symbols, it is recommended to type out the icon name in addition to providing the serial number (e.g., "C7: Bluetooth icon") to ensure accuracy. The seller is generally responsive and helpful with customization requests.
- Installation in Tight Spaces: While the switch with its wired socket is compact, consider the space behind the mounting surface, especially in older vehicles, as it might be tight.
- PDF Manual: For additional guides and documents, a PDF user manual is available. Please refer to the product page for the link to download it.
10. Warranty & Support
For any issues, questions, or support needs regarding your FENGYIELE push button switch, please contact the seller directly through the platform where you made your purchase. They are committed to customer satisfaction and can assist with defective units or other concerns.