1. Product Overview
This car decoration accessory is designed to enhance your vehicle's aesthetic appeal while protecting vulnerable surfaces from scratches, dust, and minor impacts. The product features high-quality 3M adhesive tape for secure, long-lasting installation without damaging your car's original finish.
2. Installation Instructions (Setup)
2.1 Preparation (Critical for Strong Adhesion)
Note: Proper surface preparation ensures maximum bonding strength of 3M tape.
- Choose a clean, dry, and well-ventilated area (avoid direct sunlight or humid environments).
- Clean the target surface with the provided alcohol wipe (or 50-70% isopropyl alcohol solution) to remove dust, grease, and fingerprints.
- Allow the surface to air-dry completely (1-2 minutes, no wiping after cleaning).
- Ensure the installation temperature is between 15°C-35°C (59°F-95°F) – low temperatures reduce adhesive effectiveness.
2.2 Step-by-Step Installation
- Peel off the red protective film from the 3M tape (avoid touching the adhesive surface with bare fingers).
- Align the accessory with your desired position.
- Press firmly on the entire surface of the accessory for 30 seconds – apply a minimum pressure of 15 lbs (6.8 kg) to activate the adhesive.
- Do not move or remove the accessory within 24 hours – this allows the adhesive to fully cure for permanent bonding.
3. Functions & Benefits (Operating)
3.1 Decoration Function
- Enhances vehicle appearance with stylish design.
- Customizes your car to reflect personal taste without permanent modifications.
3.2 Protection Function
- Shields car surfaces from scratches, scuffs, and minor collisions.
- Prevents dust accumulation and simplifies cleaning (wipe with a damp cloth).
- No tools, no drilling, removable without residue.
4. Safety Warnings
Warning!
- Do not install on airbag deployment areas (e.g., steering wheel, door panels near airbags) – may interfere with safety systems.
- Avoid blocking driver's view (e.g., front windshield, rearview mirrors) – violates traffic safety regulations.
- Keep away from children under 36 months – small parts may pose choking hazards.
- Do not use near open flames or high-temperature sources (adhesive may weaken above 60°C).
5. Maintenance & Care
- Clean the accessory with a soft, damp cloth – avoid abrasive cleaners or solvents.
- Check the adhesion monthly; reapply pressure if edges lift (clean the surface first if needed).
- For removal: Use 3M adhesive remover or heat the tape gently with a hair dryer (low heat) to soften the bond, then peel off slowly.
6. Troubleshooting
Problem: Accessory falls off
- Recheck surface cleanliness.
- Ensure installation temperature is adequate.
- Apply more pressure during installation.
Problem: Adhesive residue left
- Wipe with alcohol or 3M adhesive remover.
Problem: Misalignment after installation
- Remove within 5 minutes (before adhesive cures) and reposition.
- After 24 hours, follow removal instructions first (as described in Maintenance & Care).
7. Specifications
| Feature | Detail |
|---|---|
| Material | ABS |
| Item Type | Chromium Styling |
| Special Features | Decorate |
| External Testing Certification | ISO9001 |
| Model Year (as per product properties) | 2016-2022 |
| Item Length | 30 cm |
| Item Width | Variable (cminch) |
| Item Height | Variable (cminch) |
| Item Diameter | 0 cm |
| Item Weight | 300g |
| Color | Black |
| Installation Method | Automotive adhesive tape on the back |
| Package Length | 20 cm |
| Package Width | 6 cm |
| Package Height | 3 cm |
| Package Weight | 0.067 kg |
8. User Tips
- Ensure Compatibility: While listed for Fiat 500 models from 2010 to 2025, some users have reported fitment issues with specific model years (e.g., 2013). It is recommended to verify the exact fitment for your vehicle before proceeding with installation.
- Proper Installation is Key: For optimal adhesion and longevity, thoroughly clean the installation surface and apply firm, consistent pressure during the sticking process.
- Check Both Parts: One user noted receiving two parts for the same side. Ensure your package contains a correct left and right pair for proper installation.
9. Compliance Information
EU Representative: Apex CE Specialists GmbH
Representative Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
Telephone: 49-21312066043
E-mail: Info@apex-ce.de
10. After-Sales Support
Warranty Period: 12 months from purchase date (covers manufacturing defects, not improper use).
Contact Us:
- AliExpress Store Link: Tayshow-Auto Store
- Customer Service Email: 669279713@qq.com
- Service Hours: 9:00 AM - 6:00 PM (GMT+8), Monday to Friday
For the latest version of this manual or additional support, please visit our store.
User manual (PDF) available for download: Download PDF