PaiPaitek PD 526V

Contents

PaiPaitek PD 526V Series Dog Training Collar

User Manual

1. Introduction

The PaiPaitek PD 526V series dog training collar is designed to help owners effectively communicate with their dogs and correct unwanted behaviors through humane methods. This system utilizes sound and vibration signals, avoiding any harmful static shock. By associating specific signals with undesirable actions, dogs learn to modify their behavior over time.

This manual provides detailed instructions on how to set up, operate, and maintain your training collar, ensuring a safe and effective training experience for you and your pet.

Video: Product demonstration highlighting the no-shock feature and components of the PaiPaitek Dog Training Collar.

2. Package Contents

Please check the package contents carefully upon receipt. The items included may vary slightly depending on the specific model (PD 526V-1, PD 526V-2, or PD 526V-3) purchased.

Remote control and two receiver collars

Image: The remote control and two receiver collars, illustrating typical package contents.

PD 526V-1 (For 1 dog)

  • 1x Remote Transmitter
  • 1x Lanyard
  • 1x Receiver
  • 1x USB Charging Cable
  • 1x Collar Strap
  • 1x User Manual

PD 526V-2 (For 2 dogs)

  • 1x Remote Transmitter
  • 1x Lanyard
  • 2x Receiver
  • 1x USB Charging Cable
  • 2x Collar Strap
  • 1x User Manual

PD 526V-3 (For 3 dogs)

  • 1x Remote Transmitter
  • 1x Lanyard
  • 3x Receiver
  • 1x USB Charging Cable
  • 3x Collar Strap
  • 1x User Manual

3. Specifications

Feature Specification
Model PD 526V Series
Working Modes Sound, Vibration, Sound & Vibration
Vibration Levels 1-100 Levels
Channels 3 Channels
Remote Range Up to 1000m / 1100yds / 3300ft (open area)
Remote Transmitter Net Weight 58g
Receiver Net Weight 45g
Remote Transmitter Battery Capacity 300mAh
Receiver Battery Capacity 650mAh
Remote Transmitter Working Time Up to 180 days
Receiver Working Time 25-40 days
Remote Transmitter Waterproof Level IPX3
Receiver Waterproof Level IPX7
Battery Included Yes
Target Pet Dog
Material Plastic
Battery life diagram

Diagram: Long-lasting battery life for the remote (up to 180 days) and receiver (up to 20 days), with USB charging illustration.

IPX7 waterproof receiver

Image: The receiver collar is IPX7 waterproof, allowing dogs to play in water, swim, bathe, or be out in the rain.

4. Setup

4.1. Wearing the Collar Strap

Proper fit of the collar is crucial for effective training and your dog's comfort.

  1. Pass the nylon strap through the receiver.
  2. Pass the nylon strap through the tri-glide buckle.
  3. Pass the nylon strap through the side release buckle.
  4. Pass the excess nylon strap through the tri-glide buckle again.

Tips for wearing the collar:

  • The receiver should be placed on the bottom of the dog's neck.
  • Maintain a finger's distance between the collar and the dog's neck; it should not be too loose.
  • If the collar strap is too long, cut off the excess portion and use a lighter to melt the burr edge to prevent fraying.
  • The collar can be worn often, but it is recommended to take it off for several hours a day to allow the dog to relax.

4.2. Charging the Device

Ensure both the remote transmitter and receiver are fully charged before first use.

How to Choose a USB Charger

Use a USB charger with the following parameters (e.g., smartphone charger or laptop/computer USB interface):

  • Input: 100-240V~50-60HZ
  • Output: 5V 1000mA (or 300mA/500mA)

Charge the Remote Transmitter

  1. Connect the charger cable to the charging port on the remote.
  2. Plug the charger into a standard socket.
  3. The battery icon on the LCD screen will flash during charging and become solid when fully charged.

Charge the Receiver

  1. Open the rubber cover on the receiver and connect it to the charger.
  2. Plug the charger into a standard socket.
  3. The red indicator light will flash slowly during charging and remain solid when fully charged.

Check the Receiver Battery Level

When the receiver is turned on, quickly press the power button twice to hear beeps indicating the battery level:

  • 5 beeps: 100% (80-100%)
  • 4 beeps: 80% (60-80%)
  • 3 beeps: 60% (40-60%)
  • 2 beeps: 40% (20-40%)
  • 1 beep: 20% (1-20%)

Charging Tips:

  • Charge both devices for at least 2 hours upon receiving the item. The collar cannot be used while charging.
  • To maintain battery life, charge the devices every 2 months if not used frequently.
  • The receiver will automatically turn off after 10 seconds of beeping when the battery is low.
  • Ensure the charging rubber cover is tightly closed when your dog is swimming to prevent water damage.

4.3. Pairing the Remote and Receiver

The remote transmitter and receiver are typically pre-paired from the factory. If re-pairing is needed, follow these steps:

  1. Turn on the remote transmitter. Press the 'CH' button to select a signal channel (1, 2, or 3) you wish to use.
  2. Turn on the receiver. Then, hold the power button on the receiver for 2 seconds until the indicator light flashes continuously.
  3. While the receiver's indicator light is flashing, press one of the function buttons (Sound, Vibration, or Sound & Vibration) on the remote to complete the pairing.

Pairing Tips:

  • If you do not press a function button on the remote within 10 seconds, the receiver will exit pairing mode, and you will need to repeat the process.
  • For multiple receivers (PD 526V-2 or PD 526V-3), you can pair them to the same channel or different channels. Remember which channel each receiver is assigned to.
  • If the remote transmitter signal channel and receiver were pre-paired but are no longer working, please re-pair them following these instructions.

5. Operating Instructions

5.1. Introduction of Buttons

Familiarize yourself with the remote control's buttons for effective operation:

  • Signal Channel Button (CH): Press to choose channel 1, 2, or 3 for dog training.
  • Power Button/Key Lock: Press to turn the remote transmitter on and off.
  • Sound and Vibration Button: Activates both sound and vibration signals simultaneously from the receiver.
  • Vibration Button: Activates only the vibration signal from the receiver.
  • Tone Button: Activates a beep sound from the receiver. The tone function is not adjustable.
  • LED Light Button: Turns on/off the LED flashlight on the remote.
  • +/- Buttons: Adjust the vibration and sound & vibration levels (1-100).
  • Charging Port: For charging the remote transmitter.
  • Power Button (Receiver): Press to turn the receiver on and off.
  • Indicator Light (Receiver): Shows status (e.g., charging, low battery, pairing).

5.2. Training Modes

The PD 526V series offers three humane training modes:

Three training modes: Beep, Vibrate, Beep & Vibrate

Diagram: The three available training modes are Beep, Vibrate (1-100 Levels), and Beep & Vibrate (1-100 Levels).

Example Training Scenario:

  1. Ensure the collar receiver is properly worn by your dog.
  2. Set the remote transmitter to the lowest stimulation level (vibration).
  3. When your dog exhibits an unwanted behavior (e.g., barking, biting furniture), make a clear "NO" gesture and simultaneously press the sound button.
  4. If the behavior continues, press the vibration button.
  5. If your dog shows confusion or stops the behavior, acknowledge it with a verbal cue like "Yes" to reinforce that the behavior should stop.
  6. When the dog ceases the bad behavior, praise and reward them immediately.
  7. Repeat this process 3-4 times for consistent reinforcement.

Important:

  • Start with the lowest effective vibration level and gradually increase if necessary. Excessive stimulation can cause a strong negative response.
  • Dog training collars are for correction, not punishment. Use them as a tool to build communication and strengthen your bond.

5.3. Testing the Dog Training Collar

Before using on your dog, test each function:

  • Sound Function Test: Press the sound button on the remote; the receiver should emit a beep sound.
  • Vibration Function Test: Press the vibration button on the remote; the receiver should vibrate.
  • Sound and Vibration Function Test: Press the sound and vibration button on the remote; the receiver should beep and vibrate simultaneously.

5.4. Remote Range

Remote range up to 3300 feet

Image: The remote control offers an effective range of up to 3300 feet (1000 meters) in open environments.

The effective distance can be up to 1000 meters (3300 feet) in an open area without obstacles. However, factors such as signal stations, magnetic fields, physical obstacles, battery volume, other wireless devices, landform, and vegetative cover can influence the actual effective range.

5.5. Powerful Flashlight Mode

Remote with flashlight mode

Image: The remote control features a powerful flashlight mode for visibility during night walks, offering ultra-long range illumination and complementing a reflective collar.

The remote control includes a powerful LED flashlight, useful for nighttime walks or training sessions in low-light conditions. Simply press the LED Light Button to activate it.

6. Maintenance

  • Battery Care: Charge the remote and receiver every 2 months if not used frequently to maintain battery health.
  • Waterproofing: Always ensure the rubber charging port cover on the receiver is securely closed, especially before exposing it to water (swimming, bathing, rain). Failure to do so will void the waterproof feature and may damage the device.
  • Collar Hygiene: Regularly check and clean the collar strap and receiver to prevent skin irritation for your dog.
  • Storage: Store the device in a cool, dry place, away from extreme temperatures.

7. Troubleshooting

Q: The remote transmitter is normal, but the receiver is not working. How to troubleshoot?

  • Check if the receiver is turned on.
  • Ensure both the remote transmitter and receiver have sufficient battery power.
  • Try to re-pair the remote transmitter and receiver.

Q: My dog doesn't respond to functional instructions.

  • Remove the receiver and test all three functions (sound, vibration, sound & vibration) to ensure they work properly.
  • Make sure the receiver is positioned correctly under the dog's neck and is not worn too loosely.
  • Trim any excessively long dog hair that might interfere with the receiver's contact.
  • Try different features (sound, vibration, or both) to see which one elicits a response.
  • Gradually increase the vibration level, starting from 1 up to 100, to find an effective level for your dog.

Q: The receiver collar has stopped working; it won't turn on or charge. How to troubleshoot?

  • Check the receiver's appearance for any visible damage.
  • Verify that the charging plug meets the specified requirements (5V 1000mA output).
  • Connect the receiver to the charger and observe if the charging indicator light behaves normally.
  • After the receiver is fully charged, attempt to restart and re-pair it.

Q: How do I find the proper levels of vibration for my dog?

Start from the lowest level (1) and observe your dog's response. Gradually increase the level until you find a noticeable but non-distressing reaction. Excessive levels should be avoided.

Q: Can I use the dog training collar for more than one dog?

Yes, the PD 526V series remote transmitter can control up to three receivers. You will need to pair each receiver with the remote transmitter, either to the same channel or different channels, depending on your training needs.

8. User Tips

  • Consistency is Key: For best results, use the collar consistently. If your dog shows no obvious improvement after a few days, continue training for 7-10 days, as noticeable changes often take time.
  • Positive Reinforcement: Always combine collar signals with positive reinforcement. After correcting a bad behavior, clearly communicate what your dog should do instead, and reward good behavior with praise or treats.
  • Short Training Sessions: Keep training sessions positive and short, ideally around 10-15 minutes each time, to maintain your dog's engagement and prevent fatigue.
  • Reinforce Memory: Even after your dog is trained and obeys commands, it may be beneficial to have them wear the receiver collar occasionally to reinforce their memory and maintain good habits.
  • Avoid Over-Correction: The collar is a training aid, not a punishment device. Use the lowest effective stimulation level and avoid over-correcting your dog.

9. Safety Information

  • Do not expose the device to extreme heat or store it at temperatures above 113°F (45°C).
  • Always keep the dog training collar out of reach of children.
  • Consult a veterinarian before using this product if your dog suffers from heart disease, high blood pressure, cerebral thrombosis, skin allergies, or any other medical condition.
  • Ensure the receiver's charging rubber cover is tightly sealed when the collar is exposed to water to prevent damage.

10. Warranty and Support

Thank you for purchasing the PaiPaitek PD 526V remote dog training collar. This product has been tested to meet stringent quality standards and is covered by a 12-month warranty from the date of purchase.

If you have any questions or require support, please contact us via your order ID. We aim to respond within 24 hours.

Warranty Exclusions:

This warranty is invalid if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product. This includes, but is not limited to, adding essential oils directly into the tank and base (if applicable to other products) or damage from water ingress due to an improperly sealed charging port. This warranty does not apply to normal wear and tear or commercial use. In no event shall liability exceed the purchase price paid by the purchaser of the product. Under no circumstances shall there be liability for any loss—direct, indirect, or incidental—or consequential damage arising out of, or in connection with the use of the product.

Certifications: CE, FC, IC, ROHS

Made In China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.