HARLEY-DAVIDSON Docking Point Bushing Grommet

Contents

Motorcycle Docking Point Bushing Grommet User Manual

Brand: HARLEY-DAVIDSON Compatible Accessories

Model: Docking Point Bushing Grommet

1. Introduction

This manual provides essential information for the safe and effective use of your Motorcycle Docking Point Bushing Grommets. These components are designed to provide secure docking points for detachable sissy bars, luggage racks, and side plates on compatible Harley-Davidson motorcycles. Please read this manual thoroughly before installation and use.

Motorcycle Docking Point Bushing Grommets and their application on a sissy bar and luggage rack.

Figure 1: Overview of the Docking Point Bushing Grommets and their typical application.

2. Safety & Warnings

▲ Warnings: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep out of reach of children.
  • Installation must be performed by a qualified professional.
  • Do not use if the product is damaged, deformed, or corroded.
  • Use only for its intended purpose on compatible motorcycles.
  • Ensure all fasteners are securely tightened during installation.
  • Inspect regularly for wear, cracks, or looseness.
  • Store in a dry, cool place away from direct sunlight and moisture.

3. Setup & Installation

Proper installation is crucial for the safety and functionality of these grommets. It is recommended that installation be performed by a qualified professional.

  1. Confirm Compatibility: Before installation, confirm that the grommets are compatible with your specific Harley-Davidson motorcycle model and the detachable accessories (sissy bar, luggage rack, side plates) you intend to use.
  2. Prepare Mounting Area: Clean the mounting area thoroughly to ensure a proper fit and prevent debris from interfering with the installation.
  3. Install Grommets: Install the grommets using appropriate tools and standard practices. Ensure the bushings seat fully into the docking points.
  4. Verify Attachment: After installation, verify that the grommets and any attached accessories are securely fastened and function correctly.
  5. Periodic Inspection: Perform periodic inspections to ensure continued safety and check for any signs of wear, cracks, or looseness.
Diagram showing easy installation of the docking point bushings into a motorcycle's docking points.

Figure 2: Easy installation guide, ensuring bushings seat fully into docking points.

Example of grommet application on a motorcycle for luggage rack, backrest, and side plate mounting.

Figure 3: Application example for luggage rack, backrest, and side plate mounting.

4. Operation

The docking point bushing grommets serve as essential interface components, providing a stable and secure connection point for various detachable motorcycle accessories. Once installed, they allow for the quick and reliable attachment and detachment of items such as sissy bars, luggage racks, and side plates, enhancing the versatility of your motorcycle.

Diagram illustrating wide application of the grommets for luggage racks, mounting racks, sissy bar backrests, and side plates.

Figure 4: Wide application of the grommets for various motorcycle accessories.

5. Maintenance

  • Regular Inspection: Periodically inspect the grommets for any signs of wear, cracking, or damage, especially after long rides or exposure to harsh weather conditions.
  • Cleaning: Clean the grommets with a mild soap and water solution. Avoid harsh chemicals that could degrade the plastic material.
  • Storage: If removed, store the grommets in a dry, cool place away from direct sunlight and moisture to prolong their lifespan.

6. Troubleshooting

6.1. Fitment Issues

If the grommets do not fit correctly or are too loose/tight:

  • Verify Compatibility: Double-check that the product is indeed compatible with your specific motorcycle model and the docking hardware. Refer to the specifications section.
  • Check for Obstructions: Ensure the mounting area is clean and free from any debris or old material that might prevent a proper fit.
  • Inspect Grommets: Examine the grommets for any manufacturing defects or damage that might affect their shape or size.

7. Specifications

Feature Detail
Condition 100% Brand New
Material High Quality ABS Plastic
Color Black
Placement on Vehicle Rear
Compatibility All Harley Electra Glide, Road Glide, Street Glide, Road King, Softail, Sportster, Dyna with detachable sissy bar, luggage rack

7.1. Dimensions

Detailed dimensions of the docking point bushing grommet.

Figure 5: Detailed dimensions of the grommet.

  • Overall Height: 1.26" (32mm)
  • Overall Width: 1.18" (30mm)
  • Inner Width (top): 0.94" (24mm)
  • Inner Width (bottom): 1.02" (26mm)
  • Thickness (top): 0.24" (6mm)
  • Thickness (middle): 0.31" (8mm)
  • Slot Width: 0.12" (3mm)
  • Slot Depth: 0.16" (4mm)
  • Inner Arch Width: 0.71" (18mm)

8. User Tips

  • Always double-check the product dimensions and your motorcycle's docking point measurements to ensure a perfect fit before purchasing and installing.
  • Ensure the grommets are fully seated and secure in the docking points to prevent movement or detachment during operation.

9. Support

For any product-related issues, questions, or concerns, please contact the customer service team via the official online support channel on the shopping platform where you purchased the item. You may also refer to the official user manual PDF for additional details: User Manual (PDF).

10. Product Video

Video 1: Product demonstration and overview of the docking point bushing grommets.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.