1. Introduction
This manual provides essential instructions for the setup, operation, and maintenance of your BENINCA Electric Gate Garage Door Remote Control. Please read this manual thoroughly before attempting to use the device to ensure proper functionality and safety.
The BENINCA remote controls are designed for convenient access to your electric gates and garage doors. They utilize a rolling code encoding method for enhanced security and operate on a frequency of 433.92MHz.
Product Overview Video
This video demonstrates the automated packaging process for the remote controls, ensuring quality and efficiency.
2. Specifications
| Attribute | Value |
|---|---|
| Model Number | YNG111 |
| Product Name | BENINCA Remote Control |
| Encoding Method | Rolling Code |
| Frequency | 433.92MHz |
| Material | ABS |
| Battery | Included Battery |
| Number of Channels | 2 / 4 |
| Programming Type | Receiver Programming |
| Certification | CE, FCC, RoHS, WEEE |
| Origin | Mainland China |
Package Dimensions
- Length: 6 cm
- Width: 6 cm
- Height: 6 cm
- Weight: 0.06 kg
3. Compatibility
This remote control is compatible with BENINCA TO.GO VA, 2VA, 4VA, WV, 2WV, and 4WV series. Please ensure your existing remote or receiver is compatible before programming.
Overview of BENINCA TO.GO 2VA, 4VA, 2WV, and 4WV remote control models.
Important Compatibility Notes:
- The 2VA, 4VA, 2WV, and 4WV models are compatible with each other.
- If your original remote control is a VA series and you purchase a WV series remote, you will need to switch the program. Detailed instructions for this are included in the package.
- If you are unsure about compatibility or programming, please contact customer support for a learning video.
Diagram showing compatibility between 2VA, 4VA, 2WV, 4WV models and programming notes.
Incompatible Models:
The following BENINCA TO.GO models are NOT compatible with this product:
- TO.GO-A
- TO.GO 4AS
- TO.GO 2AS
- TO.GO 2AK
- TO.GO 4QV
- TO.GO-4A
- TO.GO 4AK
List of BENINCA TO.GO remote control models that are NOT compatible with this product.
4. Setup and Programming
To program your new BENINCA remote control, follow these steps carefully:
- Locate the Receiver: Open the casing of your receiver. It is typically located next to your gate or garage door motor.
- Access Programming Mode: On the receiver circuit board, locate and press the programming button (PGM). The LED light on the receiver will illuminate. Release the button immediately after the LED lights up.
- Program the Remote: Within the next 10 seconds after releasing the PGM button, press any button on your new remote control. Release the button.
- Confirmation: Wait for 10 seconds. Your new remote control should now be programmed and ready for use.
If you encounter difficulties, refer to the detailed instructions provided in the package or contact customer support.
Front view of a single BENINCA TO.GO 2VA remote control.
5. Operating Instructions
Once programmed, operating your BENINCA remote control is straightforward:
- Point the remote control towards your gate or garage door receiver.
- Press the desired button on the remote control to activate the gate or garage door.
- Ensure there are no obstructions in the path of the gate/door during operation.
Two BENINCA remote controls, possibly 2VA or 4VA models, showing the yellow button design.
Two BENINCA remote controls, possibly 2WV or 4WV models, showing the white button design.
6. Maintenance
- Battery: The remote control comes with an included battery. If the remote's range decreases or it stops responding, the battery may need replacement. Refer to the full manual for battery replacement instructions.
- Cleaning: Clean the remote control with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Storage: Store the remote control in a dry place, away from extreme temperatures and direct sunlight.
Side profile of two BENINCA remote controls, highlighting their slim design.
7. Troubleshooting
- Remote Not Responding:
- Check if the battery needs replacement.
- Ensure the remote is within range of the receiver.
- Verify that the remote has been programmed correctly following the steps in Section 4.
- Confirm that the remote control model is compatible with your receiver (refer to Section 3).
- Interference: If the remote's performance is inconsistent, check for potential sources of radio frequency interference near the receiver.
If you continue to experience issues and are unsure how to resolve them, please contact customer support. A learning video may be available to assist with programming and troubleshooting.
8. User Tips
- Easy Programming: Many users find the remote easy to program, making initial setup straightforward.
- Check Compatibility: Always verify the compatibility of the remote control with your existing BENINCA system before attempting to program.
- Inspect Upon Arrival: It is recommended to inspect the product upon receipt to ensure it meets quality expectations.
9. Warranty and Support
This product is certified with CE, FCC, RoHS, and WEEE standards, ensuring compliance with relevant safety and environmental regulations.
For detailed warranty information, specific technical support, or if you require further assistance beyond this manual, please refer to the comprehensive user manual available in PDF format or contact the seller directly.
A PDF version of the user manual can be found at: User manual (PDF)