1. Product Overview
The Senlo T1PLUS LED Sportlight is a versatile and powerful lighting solution designed for cars, motorcycles, and offroad 4x4 vehicles. Featuring a super slim design, dual beam functionality (yellow and white light), and robust construction, these lights provide enhanced visibility and safety in various driving conditions. They are engineered for high light efficiency and low energy consumption.

2. Safety Information
- Always exercise caution when driving, especially with powerful auxiliary lighting.
- Ensure proper installation to prevent damage to the vehicle's electrical system or the lights themselves.
- Do not disassemble or attempt to repair the product without authorization, as this may void the warranty and cause damage.
- When using the lights, ensure they are adjusted to avoid disturbing other road users.
- Adhere to local traffic laws regarding auxiliary lighting. Do not use lights in a manner that could be considered "blowing up the street," "racing," or "not exceeding the speed limit" in a reckless way, or "disturbing the public."
- Reasonably switch between high and low beams to ensure safety for all road users.
3. Package Contents
The package includes the following items:
- 2 x Senlo T1PLUS LED Sportlights
- 2 x Drivers (Actuators with waterproof thread)
- 1 x Wiring Harness
- Mounting Screw Accessories (bolts, nuts, washers, L-wrench, brackets)
- 3M VHB Tape
- Primer Wipes
- User Manual (this document)

4. Specifications
| Feature | Description |
|---|---|
| Product Name | T1PLUS |
| Brand Name | Senlo |
| Type | Work Light / Driving Light |
| Color Temperature | 6000K (White Beam), Yellow Beam |
| Power | 50W (per light) |
| Lumen Output | 5000 Lumens |
| Voltage | 12V - 24V DC |
| Waterproof Rating | IP68 (Rain Proof, Cold Resistance, Dust Proof) |
| Dimensions (L x W x H) | 6.5cm x 3.7cm x 1.8cm (approx. 2.56in x 1.46in x 0.71in) |
| Total Cable Length | Approx. 37.4 inches |
| Heat Dissipation | Die-cast aluminum lamp body, high-speed silent fan |
| Lens Type | Scientifically designed optical glass lens (high-strength, capable of focusing light from a distance and achieving uniform road light distribution) |
| Light Source | High quality LED chip (stable light source output) |




5. Setup and Installation
Follow these steps for proper installation of your Senlo T1PLUS LED Sportlights:
- Mounting: Use the provided mounting screw accessories (brackets, bolts, nuts, washers) to securely attach the LED lights to your desired location on the car or motorcycle. Ensure the lights are positioned to provide optimal illumination without obstructing other vehicle components.
- Wiring Connection:
- Connect the wiring harness to the LED lights.
- Identify the vehicle's original light circuit.
- Connect the black wire from the LED light harness to the negative pole of your vehicle's power supply.
- Connect the white wire to the positive pole for the low beam function.
- Connect the yellow wire to the positive pole for the high beam function.
- The red wire, if present, is designed to activate both low and high beams simultaneously. If you do not require both beams to be on at the same time, you do not need to connect the red line.
- Integration with Vehicle Controls: Our lights can be controlled through the original light control switch of your vehicle to light up simultaneously with the original car lights.
- Secure Connections: Ensure all connections are tight and secure. Use the provided 3M VHB tape and primer wipes for additional adhesion and stability where needed.
- Testing: Before finalizing the installation, test the lights to ensure they function correctly (low beam, high beam, and dual beam if connected).

6. Operating Instructions
Once installed, the Senlo T1PLUS LED Sportlights are designed for straightforward operation:
- Power On/Off: The lights will activate with your vehicle's ignition or when controlled by the integrated switch, depending on your wiring setup.
- Beam Selection:
- White Beam (Low Beam): Activates when the white wire is powered. Provides a clear, bright white light suitable for general driving.
- Yellow Beam (High Beam): Activates when the yellow wire is powered. Provides a distinct yellow light, often preferred for adverse weather conditions like fog or rain.
- Dual Beam (White & Yellow): If the red wire is connected, both white and yellow beams will activate simultaneously, offering maximum illumination.
- Switching: Use your vehicle's original light control switch to toggle between the low beam (white) and high beam (yellow) functions, or to activate the dual beam if wired accordingly.

7. Maintenance
- Cleaning: Periodically clean the lens of the LED lights with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners that could scratch the lens.
- Inspection: Regularly inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure all mounting hardware remains tight.
- Heat Dissipation: Ensure the heat dissipation fins and fan (if applicable) are free from obstructions to maintain optimal cooling performance.
- Storage: If storing the vehicle for an extended period, ensure the lights are clean and disconnected from power if necessary.
8. Troubleshooting
- Lights Not Turning On:
- Check all wiring connections for proper contact and ensure they are securely fastened.
- Verify that the vehicle's power supply to the lights is active.
- Inspect fuses in the vehicle's electrical system that might be connected to the light circuit.
- Incorrect Beam Color/Function:
- Ensure the white and yellow wires are connected to their respective positive terminals for low and high beam functions.
- Important: Do not connect the red and yellow wires together, as this will damage the light. Each color (white and yellow) operates on an independent channel.
- Flickering or Dim Lights:
- Check for loose connections or inadequate grounding.
- Verify that the vehicle's voltage is within the specified 12V-24V range.
- Missing Mounting Hardware: If any mounting brackets or screws are missing upon arrival, please contact customer support for assistance.
9. User Tips
- Many users find the yellow beam to be exceptionally powerful and effective, sometimes preferring it over the white beam for certain conditions.
- The lights are compact and discreet, making them suitable for installations where space is limited or a subtle appearance is desired.
- Each light consumes approximately 25W, providing high-intensity light output with relatively low power draw.
- Always double-check the package contents upon receipt to ensure all mounting accessories are included.
10. Frequently Asked Questions (FAQ)
- Q: Can I connect the red and yellow wires together?
- A: No, connecting the red and yellow wires together will damage the light. Each color (white and yellow) operates on an independent channel.
- Q: How do I connect the lights to a 3-position switch?
- A: For specific wiring diagrams for advanced setups like a 3-position switch, please refer to the detailed wiring diagram provided in the manual or contact customer support for tailored guidance.
11. Warranty and Support
Thank you for purchasing the Senlo T1PLUS LED Sportlight. We are committed to providing quality products and service.
Warranty Information:
- Warranty Period: All Senlo car lights come with a 1-year warranty, starting from the date of purchase.
- Product Replacement: Within 14 days from the date of purchase, if there are any quality issues with the product under normal use, you may be eligible for a replacement with the same model or an equivalent product at our sales points or service centers.
- Repair Services: During the warranty period, you can enjoy free repair services for quality problems caused by the product itself. For products that exceed the warranty period, repair costs will be charged at our discretion.
Warranty Exclusions:
The warranty service does not cover:
- Damage caused by improper use, negligence, or abuse.
- Damage caused by natural disasters or other force majeure factors.
- Unauthorized modification or repair of the product.
- Normal wear and aging of the product.
- Products that have exceeded their warranty period.
- Failure to provide purchase vouchers and valid invoices.
- Auxiliary spotlight accessories (such as wire sets, brackets, switches) are not covered by the warranty.
Contact and Support:
For any quality problems or after-sales service inquiries, please contact your car light dealer or our after-sales service center. Please do not disassemble the product without authorization for repair.
A detailed user manual (PDF) is available for download here.