Introduction
Thank you for choosing the NieNie Digital Alarm Clock. This manual provides detailed instructions for setting up and operating your new clock. Please read it carefully to ensure proper use and to fully enjoy its features, including time, date, temperature, humidity, dual alarms, and a convenient USB charging port.

Digital Alarm Clock displaying time, day, temperature, and humidity on a wooden shelf.
Key Features
- Large LED Display with Time, Date, Day of Week
- Temperature Display (°C/°F)
- Humidity Display (%)
- Dual Alarm Function with Snooze
- Daylight Saving Time (DST) Function
- 3 Levels of Brightness Adjustment and Automatic Dimming
- 12/24 Hour Time Format
- USB Output Charging Port (5V 1A)
- Compact and Modern Design
Package Contents
- 1 x NieNie Digital Alarm Clock Unit
- 1 x USB Power Cable
- 1 x User Manual (this document)
Setup
Power Supply
The clock supports two power supply modes:
- **DC 5V Power Supply (USB Cable)**: Connect the provided USB cable to the input USB port on the back of the clock and plug the other end into a 5V USB power adapter (not included). The screen will remain continuously on.
- **AAA Battery Power Supply**: Insert 3 AAA batteries (not included) into the battery compartment on the back of the clock. In this mode, the screen will turn off automatically after 10 seconds to conserve power. Press any button to wake up the screen.
Note: When powered by AAA batteries, the USB output charging port cannot be used to charge other devices.

Rear view of the digital alarm clock showing power input and output ports, and battery compartment.
Initial Power On
Once powered, the clock will display the default time. You may need to adjust the time, date, and other settings as described in the Operating Instructions section.
Operating Instructions
The clock features several buttons on the top and back for various settings. Refer to the diagram below for button identification (buttons are typically labeled M, +, -, SNOOZE, A, S, E).
General Settings (Time, Date, 12/24H Format)
- **Enter Setting Mode**: Press and hold the 'M' (Mode) button to enter the general settings.
- **Adjust Time**: While in setting mode, use the '+' and '-' buttons to adjust the hour and minute. Press 'M' to confirm and move to the next setting.
- **Set 12/24H Format**: After time, you can select between 12-hour and 24-hour format using the '+' or '-' buttons. Press 'M' to confirm.
- **Set Date**: Adjust the year, month, and day using the '+' and '-' buttons, pressing 'M' after each to confirm.
- **Exit Setting Mode**: Continue pressing 'M' until the clock returns to normal display, or wait a few seconds for it to exit automatically.

Example of 12-hour and 24-hour time display.
Alarm Settings
The clock supports two independent alarms (Alarm 1 and Alarm 2).
- **Enter Alarm Setting Mode**: Press the 'A' (Alarm) button once to view Alarm 1. Press it again to view Alarm 2. Press and hold 'A' to enter the setting mode for the currently displayed alarm.
- **Set Alarm Time**: Use the '+' and '-' buttons to adjust the alarm hour and minute. Press 'A' to confirm and move to the next setting.
- **Enable/Disable Alarm**: After setting the time, you can enable or disable the alarm. An alarm icon (1 or 2) will appear on the display when enabled.
- **Snooze Function**: When an alarm sounds, press the 'SNOOZE' button to activate snooze. The alarm will sound again after a set interval (typically 5-10 minutes).
Brightness Adjustment and Auto Dimming
The clock offers three manual brightness levels and an automatic dimming mode.
- **Manual Brightness**: Short press the 'S' (Set) button to cycle through brightness levels: L-01 (brightest), L-02 (medium), L-03 (dimmest).
- **Automatic Dimming**: Continue pressing 'S' until 'L-AU' is displayed. In this mode, the clock will automatically adjust its brightness based on ambient light, typically dimming during nighttime hours (e.g., 00:00-08:00).

Visual representation of different brightness levels and auto-dimming mode.
Display Modes (Time / Time & Date)
You can switch between displaying only the time or alternating between time and date.
- **Switch Display Mode**: In the normal time display state, press and hold the '+' button for more than 3 seconds to toggle between displaying only the time and displaying time alternating with the date.

Clock displaying date and temperature/humidity.
Daylight Saving Time (DST)
To activate or deactivate Daylight Saving Time:
- **Toggle DST**: In the normal time display state, short press the 'E' button to turn DST on or off. The 'DST' indicator will appear or disappear on the screen.
Temperature Unit (°C/°F)
To switch between Celsius and Fahrenheit:
- **Change Unit**: In the normal time display state, short press the '-' button to toggle the temperature unit between Celsius (°C) and Fahrenheit (°F).
USB Output Charging Port
The clock features a 5V 1A USB output port to charge small electronic devices. This port is only active when the clock is powered via the DC 5V USB cable (not when using AAA batteries).
Demonstration of the digital alarm clock's features, including time, temperature, humidity display, and brightness adjustment.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 5508/DS-6662 |
| Brand Name | NieNie |
| Type | Alarm Clocks |
| Material | Plastic |
| Screen Type | LED |
| Motivity Type | Digital |
| Function | Temperature Display, Humidity Display, Calendars |
| Shape | Geometric (Single Face) |
| Length | 120mm (4.7 inches) |
| Width | 90mm (3.5 inches) |
| Height / Depth | 35mm (1.0 inches) |
| Weight | 190g |
| Power Input | DC 5V (via USB cable) |
| Battery | 3 x AAA (not included) |
| USB Output | 5V 1A |

Product dimensions.
Troubleshooting
- **Clock not turning on**: Ensure the USB cable is securely connected to a 5V power source, or that fresh AAA batteries are correctly inserted.
- **Screen turns off too quickly**: If using batteries, this is normal behavior to save power. Press any button to reactivate the display. For continuous display, use the DC 5V USB power supply.
- **USB charging port not working**: Ensure the clock is powered via the DC 5V USB cable. The charging port does not function when the clock is running on AAA batteries.
- **Incorrect time/date**: Refer to the "General Settings" section to manually adjust the time and date.
- **Alarm not sounding**: Check that the alarm is enabled (alarm icon visible) and the volume is not set to zero (if applicable, though this model does not specify volume control).
User Tips
- For best visibility and continuous display, always use the USB power cable.
- Place the clock in a location where the auto-dimming sensor (if used in L-AU mode) can accurately detect ambient light for optimal brightness adjustment.
- The temperature and humidity readings are for the immediate vicinity of the clock. For precise room conditions, consider other dedicated sensors.
Warranty and Support
For detailed warranty information and further support, please refer to the official user manual PDF available at this link. You can also contact the seller for assistance.