CETANT WLX007

Contents

Modern LED Mirror Headlight User Manual

Model: WLX007

1. Setup and Installation

Before beginning installation, please read all instructions carefully and ensure you have all necessary tools and components.

1.1 Safety Precautions

  • Always disconnect power at the circuit breaker before installing or servicing the fixture.
  • Ensure the installation location is not in flammable or excessively humid areas.
  • Verify that all parts and accessories are present and undamaged before starting.

1.2 Tools Required

  • Pencil
  • Drill
  • Hammer
  • Screwdriver (Phillips or Flathead, as needed)

1.3 Installation Procedure

Follow these steps for proper installation:

  1. Mark Mounting Position: Confirm the desired position for the light fixture and mark the drilling points on the wall.
  2. Drill Holes: Use a drill to create holes at the marked positions.
  3. Insert Wall Plugs: After drilling, insert the rubber wall plugs into the holes. Tap gently with a hammer if necessary to ensure they are flush with the wall.
  4. Mount Pendant/Bracket: Use a screwdriver to securely attach the mounting pendant or bracket to the wall using the provided screws.
  5. Wire Connections: Connect the live wire (usually brown or red), ground wire (green/yellow), and neutral wire (blue or black) from your electrical supply to the corresponding terminals on the fixture's connector. Ensure connections are secure.
  6. Connect Cables: Carefully connect the fixture's internal cables to the main power supply cables.
  7. Secure Fixture: Align the lamp with the mounted bracket and tighten the screws to firmly fix the lamp to the wall.
Installed LED mirror lights in a room

Figure 1: Example of installed LED mirror lights.

Diagram showing dimensions and power specifications for 40cm, 60cm, and 80cm LED mirror lights

Figure 2: Product dimensions and general specifications.

Detailed specifications for the black 40cm LED mirror light variant

Figure 3: Detailed specifications for the 40cm Black variant.

Image showing a person performing wiring during the installation of the LED mirror light

Figure 4: Wiring during installation.

Modern LED mirror light installed above a round mirror in a bathroom with gold accents

Figure 5: Example of the light in a bathroom setting.

2. Operating Instructions

The CETANT WLX007 LED Mirror Headlight is designed for simple operation.

2.1 Power On/Off

Once properly installed and connected to the main power supply, the light fixture is controlled by a standard wall switch connected to its circuit. Flip the wall switch to the 'ON' position to illuminate the light, and to the 'OFF' position to turn it off.

2.2 Light Modes

This fixture is available in different light color temperatures (Cool Light or Warm Light) depending on the model purchased. It is not dimmable.

3. Maintenance

Regular cleaning will help maintain the appearance and performance of your LED mirror headlight.

3.1 Cleaning

  • Disconnect Power: Always ensure the power is turned off at the wall switch and, if possible, at the circuit breaker before cleaning.
  • Gentle Cleaning: Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces of the fixture.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or acrylic components.
  • Drying: Ensure the fixture is completely dry before restoring power.

4. Troubleshooting

If your LED mirror headlight is not functioning correctly, please check the following common issues:

ProblemPossible CauseSolution
Light does not turn onNo power supplyCheck if the wall switch is ON. Verify the circuit breaker is not tripped. Ensure all wiring connections are secure.
Light flickersLoose wiring connectionTurn off power and re-check all wiring connections for tightness.
Light is dimIncorrect voltage or faulty unitEnsure the voltage supply is within the specified range (85-265V). If the problem persists, contact customer support.

Warning: For any electrical issues beyond simple checks, it is recommended to consult a qualified electrician.

5. Specifications

Detailed technical specifications for the CETANT WLX007 LED Mirror Headlight:

FeatureSpecification
Model NumberWLX007 (also referred to as PL230)
BrandCETANT
MaterialAluminum, Acrylic
Operating VoltageAC 85-265V
Power SourceAC
Working Power10-16W (10W for 40cm length, 16W for 60cm and 80cm lengths)
Light SourceLED Bulbs (LED chip)
Luminous Flux249-2000 Lumens
Lighting Area3-10 square meters (3-8m² for 40cm, 5-10m² for 60/80cm)
Dimensions (Length)40cm, 60cm, or 80cm (depending on model)
Dimensions (Height)13cm
Wall Spacing6cm
Installation TypeWall Mounted, Self-Contained
Shade DirectionUp
Is DimmableNo
Is Smart DeviceYes
CertificationRoHS, pse, CE, CCC
Warranty2 years

6. User Tips

  • Color Selection: When purchasing, carefully review product images and descriptions to ensure the chosen finish (e.g., gold, black, silver) matches your aesthetic preferences, as the actual product appearance is consistent with descriptions.
  • Installation Method: The fixture is designed for screw-based wall mounting. Ensure you have appropriate wall anchors for your wall type.

7. Warranty and Support

7.1 Product Warranty

This CETANT LED Mirror Headlight comes with a 2-year warranty from the date of purchase, covering manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims.

7.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or retailer from whom you purchased the product. Provide your model number (WLX007) and purchase details for faster service.

A detailed user manual in PDF format may also be available for download from the seller's product page or by contacting support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.