HSmartcam 3inch-1pcs

Contents

User Manual: 3.0 Inch Acrylic Indoor / Outdoor CCTV Replacement Clear Camera Dome Housing

1. Introduction and Overview

This manual provides essential information for the proper installation, operation, and maintenance of your 3.0 Inch Acrylic Indoor / Outdoor CCTV Replacement Clear Camera Dome Housing. This high-quality dome cover is designed to protect your CCTV camera from environmental factors while ensuring optimal image clarity.

Key features include:

  • High Transparency: ≥94% for clear, unobstructed views.
  • Durability: Vandal-Proof, ultraviolet resistance, and aging resistance.
  • Optical Performance: Optically tested for true high-definition camera use, compatible with 1080P and 10-megapixel cameras.
  • Precision Manufacturing: Injection molded for consistent optical and dimensional performance.
  • Material Quality: Made from Acrylic / Polycarbonate (by ARKEMA and Mitsubishi Chemical).
  • Certifications: Through ISO14000, SGS, and RoHS certification.

2. Safety Information and Compliance

Please read all instructions carefully before using this product. Failure to follow these instructions may result in damage to the product or personal injury.

2.1 Important Safety Information

  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture beyond its intended outdoor rating.
  • Warning: Keep the device and its cord (if applicable) out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.

2.2 Compliance Information

This product is CE compliant, indicating it meets the essential health and safety requirements of European directives.

3. Product Specifications

Feature Specification
Product Type CCTV Replacement Clear Camera Dome Housing
Outer Diameter Φ85 mm
Flange Diameter Φ79.5 mm
Inside Diameter Φ76.03 mm
Height 45.14 ± 0.3 mm
Thickness 5 mm
Transparency ≥94%
Distortion Factor ≤0.16%
Material Acrylic / Polycarbonate
Certifications ISO14000, SGS, RoHS
Compatibility 1080P and 10-megapixel cameras
Package Length 15 cm
Package Width 17 cm
Package Height 21 cm
Package Weight 0.09 kg

Refer to the diagram below for detailed dimensions:

Diagram showing the dimensions of the camera dome housing, including outer diameter, flange diameter, inside diameter, height, and thickness.
Figure 1: Camera Dome Housing Dimensions
Detailed diagram illustrating the various measurement points of a dome cover, including material type, color, height, dome diameter, inside diameter, flange diameter, lip, and thickness.
Figure 2: Dome Cover Measurement Points

4. Installation and Setup

This dome housing is designed as a replacement part for existing CCTV cameras. Ensure you have the correct size before proceeding with installation.

4.1 Pre-Installation Check

Before purchasing and installing, carefully measure your original dome cover and compare it with the provided dimensions in Section 3. An unboxing and measurement video is available for reference:

Video 1: Unboxing and Measuring the Dome Cover

4.2 Replacement Steps

  1. Power Off: Disconnect power to the CCTV camera before beginning any work.
  2. Remove Old Dome: Carefully remove the existing dome cover from your camera housing. Note how it is attached (screws, clips, etc.).
  3. Clean Camera: Gently clean the camera lens and surrounding area to remove any dust or debris.
  4. Position New Dome: Align the new replacement dome housing with the camera base.
  5. Secure Dome: Secure the new dome housing using the original fasteners or appropriate mounting mechanism. Ensure it is seated firmly and evenly to prevent gaps.
  6. Power On: Reconnect power to the CCTV camera and verify proper operation and image quality.

5. Operation

The primary function of this dome cover is to provide protection for your camera while maintaining clear visibility. Its high transparency and optical quality ensure that your camera's image display is not compromised.

5.1 Important Note on IR Lights

Please Note: If the IR (Infrared) lights are too bright, it may cause reflection at night, affecting image clarity.

Observe the difference in image quality with and without proper IR management:

CCTV footage showing a hazy, washed-out image due to excessive IR reflection at night.
Figure 3: Image BEFORE adjusting IR lights (hazy due to reflection)
CCTV footage showing a clear, sharp image after adjusting IR lights, demonstrating improved night vision.
Figure 4: Image AFTER adjusting IR lights (clearer night vision)

6. Maintenance

To ensure the longevity and optimal performance of your camera dome housing, follow these maintenance guidelines:

  • Cleaning: Regularly clean the dome surface with a soft, lint-free cloth and a mild, non-abrasive cleaning solution. Avoid harsh chemicals or abrasive materials that could scratch the acrylic/polycarbonate.
  • Inspection: Periodically inspect the dome for any signs of damage, cracks, yellowing, or excessive wear. While designed for durability, extreme conditions or impacts can cause damage.
  • Environmental Factors: Ensure the camera and dome are not exposed to conditions beyond their rated environmental specifications.

7. Troubleshooting

If you encounter issues with your camera's image quality after installing the dome, consider the following:

7.1 Image Haze or Reflection at Night

  • Problem: Hazy, washed-out, or reflective image, especially during night vision.
  • Cause: Overly bright IR lights reflecting off the dome surface.
  • Solution: Adjust the camera's IR light settings (if available) or ensure the IR illuminators are positioned correctly to minimize reflection. Refer to your camera's manual for IR adjustment options.

7.2 Image Distortion, Yellowing, or Fuzziness

  • Problem: Image appears distorted, yellowed, fuzzy, or shows ghosting.
  • Cause: While this dome is made from high-quality materials, inferior dome covers can cause these issues over time due to rupture, yellowing, or deformation.
  • Solution: Ensure the dome is clean. If the issue persists and the dome is old or damaged, consider replacing it. This product is designed to prevent such issues with its high-quality materials and optical properties.

8. User Tips

  • Verify Dimensions: Always measure your existing dome cover carefully before purchasing a replacement to ensure a perfect fit.
  • Compatibility: This dome has been successfully used as a replacement for Hikvision and Dahua IPCAM SAMxx cameras.
  • Quality Assurance: Users have noted the accurate sizing and excellent fit for various dome CCTV models.

9. Manufacturer and EU Representative Information

9.1 Manufacturer

Shenzhen Xinchi Technology Co., Ltd.
NO.5-102, Low Mountain Eighth Lane, Xinsheng Community,
LongGang Street, LongGang District, Shenzhen, Guangdong Province, China
Email: 252703174@qq.com

9.2 EU Authorized Representative

eVatmaster Consulting Gmbh
Raiffeisen Street2B11, 63110 Rodgau, Hessen, Germany
Contact: contact@evatmaster.com
Phone: +496995179070

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.