1. Introduction
Thank you for choosing the Erilles Wireless Bluetooth Earphones. This product is a wireless Bluetooth headphone supporting Bluetooth connection, touch control, and call noise reduction. It is compatible with Bluetooth devices such as mobile phones, tablets, and computers, providing clear sound quality and a convenient user experience.
2. Package Contents
Please check the box for the following items:
- Wireless Bluetooth Earphones (Left and Right)
- Charging Case
- Charging Cable
- User Manual (This document and a physical copy)
3. Setup and First Use
3.1. Power On/Off
- Power On: Open the charging case cover, and the headphones will automatically enter standby ready state.
- Power Off: Put the headphones into the charging case and close the cover to disconnect and shut down automatically.
3.2. Bluetooth Pairing
- First Use:
- Turn on Bluetooth on your device (e.g., smartphone, tablet, computer).
- Wait for the pairing request prompt.
- Click to connect to "Erilles Earphones" (or similar name).
- Once connected, take out the headphones for use.
- Re-pairing:
- Put both headphones back into the charging case.
- Close the cover for 5 seconds.
- Open the cover (no need to take out the headphones). The headphones will restart pairing mode automatically.
- Wait for the pairing request prompt on your device and reconnect.
4. Operation
4.1. Touch Controls
The earphones feature intuitive touch controls. Refer to the table below for specific functions:
| Function | Action |
|---|---|
| Play/Pause Music | Tap the touch button once (either earbud). |
| Previous Track | Double-tap the left earbud's touch button quickly. |
| Next Track | Double-tap the right earbud's touch button quickly. |
| Decrease Volume | Triple-tap the left earbud's touch button quickly. |
| Increase Volume | Triple-tap the right earbud's touch button quickly. |
| Answer Call | Tap the touch button once (either earbud). |
| End Call (during call) | Tap the touch button once (either earbud). |
| Reject Call (incoming call) | Double-tap the touch button quickly (either earbud). |
5. Charging
5.1. Charging Method
Insert the charging cable into the headphone's charging port, and connect the other end to a 5V USB charging device (e.g., charger, computer).
5.2. Indicator Status
- During charging: Red light stays on.
- Fully charged: Green light stays on.
5.3. Charging Time
Charging typically takes about 1.5-2 hours. It is recommended to unplug the charging cable after the earphones are fully charged to preserve battery life.
6. Maintenance and Safety Precautions
- Avoid using or charging the earphones in high temperature, low temperature, or humid environments to prevent battery damage.
- The headphone has a built-in lithium polymer battery. Do not disassemble, squeeze, or short-circuit it to prevent danger.
- The effective Bluetooth distance is about 10 meters. Avoid obstacles in between to ensure stable connection.
- When not in use for a long time, store the earphones after a full charge and recharge them every 3 months to extend battery life.
7. Troubleshooting
If you encounter any issues, please refer to the following common problems and solutions:
- Q: Cannot search for the headphone?
A: Ensure the charging case cover is open and the headphones are in pairing mode. Restart Bluetooth on your device and try again. You can also close the cover for 5 seconds then open it to reset the headphones, and wait for the pairing request prompt.
- Q: Fuzzy sound/connection drop?
A: Move closer to the Bluetooth device, remove any obstacles between the earphones and the device, or re-pair the earphones and wait for the request prompt.
- Q: Cannot charge?
A: Check if the charging cable is properly connected. Try replacing the charging device (e.g., wall adapter) or the charging cable and try again.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Erilles |
| Material | Plastic |
| Style | In-ear |
| Communication | True wireless (Bluetooth) |
| Wireless Type | Bluetooth |
| Bluetooth Version | 5.3 |
| Maximum Wireless Range | 10m-20m |
| Vocalism Principle | Dynamic |
| Driver Diameter | 10mm |
| Impedance Range | up to 32 Ω |
| Resistance | 10Ω |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 100dB |
| Total Harmonic Distortion | 1% |
| Max Output | 100mW |
| Battery Capacity (Charging Case) | 300mAh |
| Battery Life (up to) | 4-6 hours |
| Charging Method | Charging case |
| Waterproof Rating | IPX5 (Life-grade waterproof, sweat-proof) |
| With Microphone | Yes (HD Mic, ENC Noise Reduction) |
| Sound Isolating | Yes |
| Active Noise-Cancellation | No (Features mention "Active Noice Cancelling" but
Ask a question about this manualAsk about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it. |