1. Introduction
Thank you for choosing the ECHTPOWER Wireless Pro Controller. This manual provides essential information for setting up, operating, and maintaining your controller. Please read it carefully before use.
1.1 Package Contents
- Wireless Controller × 1
- Charging Cable × 1
- Instruction Manual × 1
1.2 Compatibility
This controller is compatible with the following platforms:
- Nintendo Switch (including Switch, Switch Lite, Switch OLED, Switch 2)
- PC
- Android devices
- iOS devices
2. Technical Specifications
The ECHTPOWER Wireless Pro Controller features robust technical specifications for optimal performance:
| Feature | Specification |
|---|---|
| Power Supply | Built-in polymer battery |
| Usage Time | 10-16 hours |
| Battery Capacity | 800mAh |
| Charging Time | 2.5 hours |
| Charging Voltage | DC 5V |
| Charging Current | 250mA |
| Trigger Button Type | Hall-Linear |
| Interface Type | USB, Bluetooth |
3. Product Overview
Familiarize yourself with the layout and functions of your ECHTPOWER Wireless Pro Controller.
3.1 Button Layout
- Screen Capture Button: Captures screenshots.
- Home Button: Powers on the controller and returns to the home screen.
- Turbo Button: Activates and manages rapid fire functions.
- '+' Button: Standard plus button.
- A/B/X/Y Buttons: Standard action buttons.
- Left Joystick / L3: Left analog stick, also functions as L3 button when pressed.
- Left 3D Ring: LED ring around the left joystick.
- D-pad: Directional pad.
- M Button: Used for macro programming.
- Right Joystick / R3: Right analog stick, also functions as R3 button when pressed.
- Right 3D Ring: LED ring around the right joystick.
- Charging Indicator: Shows charging status.
- Pairing Button: Initiates pairing mode and powers off the controller.
- R Button: Right shoulder button.
- L Button: Left shoulder button.
- ZR Button: Right trigger button.
- ZL Button: Left trigger button.
- Type-C Charging Port: For charging the controller.
- Channel LED: Indicates the connected channel.
- ML Button: Programmable back button (left).
- MR Button: Programmable back button (right).
- Vibration Switch: Toggles vibration function.
- Light Switch Key: Controls joystick ring lighting.
4. Setup and Connection
4.1 Initial Activation
Before initial use, the controller needs to be charged using the provided USB data cable to activate it. Connect the controller to a power source (e.g., Switch dock or AC adapter) via the Type-C charging port.
4.2 Power On/Off
- Power On: Press the Home button lightly.
- Power Off: Press the pairing button lightly.
4.3 Connection Methods for Various Devices
Refer to the table below for detailed connection instructions for different platforms.
| Platform | Connection Method | Power On Combination | Device Name | Indicator Lights |
|---|---|---|---|---|
| Switch | Wired | USB Direct Plug | Automatic channel indicator light | |
| Bluetooth | Long press pairing button for 3 seconds | Channel indicator light | ||
| PC | Wired Xinput | USB direct insertion | Xbox 360 Controller | LED1+LED4 |
| Wired Dinput | Long press '+-' in Wired Xinput mode | Gamepad | LED2+LED3 | |
| Bluetooth Xinput | Y + pairing button | Xbox 360 Controller | LED1+LED4 | |
| Bluetooth Dinput | X + pairing button | Gamepad | LED2+LED3 | |
| iOS | Bluetooth | Y + pairing button | Xbox 360 Controller | LED1+LED4 |
| Android | Bluetooth | X + pairing button | Gamepad | LED2+LED3 |
Note for Switch Wired Connection: When connecting to the Switch via cable, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled in your Switch system settings.
5. Operating Instructions
5.1 Turbo Rapid Fire Function
Supported buttons for Turbo: A, B, X, Y, L, R, ZL, ZR, D-pad.
- Manual Turbo: Hold the T button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
- Automatic Turbo: Hold the T button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
- Disable Turbo: Hold the T button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
- Clear All Turbo Settings: Press and hold the "TURBO" button for 3 seconds to clear rapid fire settings for all buttons.
- Speed Adjustment: Rapid fire speed can be adjusted to fast, medium, or slow (default is slow). Hold the "TURBO" button on the controller and simultaneously move the right joystick up or down to adjust the speed.
5.2 Macro Setting for Back Buttons (ML/MR)
Supported buttons for Macro: A, B, X, Y, L, R, ZL, ZR, L3, R3, D-pad.
- Entering Programming Mode: Press and hold the M button for 2 seconds. The left and right 3D rings will slowly flash (if LED effects are enabled), indicating the controller has entered programming mode.
- Mapping a Button: While in programming mode, press the button you want to program (map). The left and right 3D rings will flash quickly.
- Programming Confirmation: Press ML or MR. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming (mapping).
- Note: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
- Clearing Settings: After holding the M button for 2 seconds and seeing the left and right 3D rings flash slowly, press ML or MR to clear the programmed back button settings.
5.3 Light Adjustment
- Light Key + R3: Switch between 3 modes (steady, breathing/running horse, rainbow).
- Light Key + L3: In steady mode, switch colors. In breathing/running horse mode, no effect. In rainbow mode, pause rainbow effect.
- '+' and Turbo Combo Key: Press both simultaneously for 3 seconds; the motor vibrates briefly, resetting the lights to default settings.
- Toggle Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold the lighting button again for 10 seconds to reactivate the joystick ring lighting.
5.4 Vibration Adjustment
- Adjusting Intensity: After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
- Disabling/Re-enabling Vibration: Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function of both motors.
6. Maintenance
6.1 Charging
Connect the adapter using the USB data cable to the Type-C charging port. The charging indicator will remain orange while charging. Once fully charged, the orange charging indicator will turn off.
6.2 Low Battery Indication
When the battery is low, the light of the current channel will flash quickly as a reminder to charge the controller.
6.3 Standby Mode
- Manual Standby: When the controller is powered on, short press the "Pairing" button to enter standby mode.
- Automatic Standby (Pairing): If the controller is in pairing mode and fails to pair after 60 seconds, it will automatically enter standby mode.
- Automatic Standby (Inactivity): When the controller is connected to a console, it will automatically enter standby mode after 15 minutes of inactivity.
7. Troubleshooting
7.1 Resetting the Controller
If the controller malfunctions or behaves abnormally, you can reset it by pressing and holding the "HOME" button for 10 seconds.
7.2 Addressing Joystick Drift
Joystick drift can occur if the joystick is pushed during wireless connection. To prevent and resolve this:
- Ensure the controller is disconnected or in a disconnected state.
- When reconnecting wirelessly, avoid touching the joysticks.
- If drift occurs, disconnect and then reconnect the controller without touching the joysticks. This should resolve the issue.
8. User Tips
Based on feedback from other users, here are some helpful tips for using your ECHTPOWER Wireless Pro Controller:
- Gyroscope Functionality: The controller's gyroscope works effectively, enhancing gameplay in motion-sensitive titles like Zelda: Breath of the Wild.
- Compatibility: Users confirm seamless operation with Nintendo Switch 2 and PC, noting easy setup and reliable performance.
- Macro and Turbo Features: The macro and turbo functions are highly appreciated for automating repetitive in-game actions and can be customized for speed.
- Initial Switch Connection: For wireless pairing with a Nintendo Switch, it is recommended to first connect the controller via USB cable to the Switch to ensure proper activation and recognition.
- Trigger Behavior: Note that the ZL and ZR buttons function as digital buttons rather than analog triggers.
- Battery Life: While generally good, the battery life may be slightly less than some other controllers, but it is sufficient for extended gaming sessions.
9. Safety Precautions
To ensure safe and proper use of your controller, please observe the following:
- Do not expose the product to liquid.
- Do not disassemble the product.
- Avoid dropping the product.
- Avoid exposing the product to extremely high or low temperatures.
The symbol indicating separate collection for electrical and electronic equipment means that the product should not be disposed of with household waste but brought to an appropriate collection point for recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.
10. Compliance Information
10.1 Declaration of Conformity (CE)
Model: ES01
The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that ES01 radio equipment conforms to the Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).
The full text of the EU Declaration of Compliance can be found on: www.echtpower.com
10.2 UKCA Declaration of Conformity
The product conforms to UK standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that ES01 radio equipment conforms to the Directive EN IEC 62368-1:2020; BS EN 50663:2017, BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).
The full text of the UKCA Declaration of Compliance can be found on: www.echtpower.com
10.3 FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
FCC ID: 2A88F-ES01
11. Warranty and Support
For further assistance or inquiries, please contact us:
- Tel: 0755-21010839
- Email: service@echtpower.com
- Web: www.echtpower.com
Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
A PDF version of this user manual is also available for download from the manufacturer's website or via this direct link: User Manual (PDF).