Wireless Tag Wireless Tag

Contents

Mini GPS Tracker User Manual

Model: Wireless Tag

Brand: Generic

1. Introduction

The Wireless Tag is a smart tracker designed to seamlessly integrate with Google's Find My Device app, helping you locate your personal items with ease. It leverages the network of billions of Android devices worldwide for accurate tracking. All location information remains private, and even Google cannot access it.

This device is the same size as an AirTag and is IP67 waterproof, making it durable for everyday use. It supports global accurate positioning and can be placed in wallets, luggage, or strapped to other valuables.

Wireless Tag device with 'Works with Android Find My Device' logo and text 'The same size as Airtag'.

Figure 1: Wireless Tag with Google Find My Device compatibility.

2. Setup Guide

2.1 Power On

To power on the Wireless Tag, press and hold the circular dot on the device's power button for 3 seconds. You will hear a ring-ring chime, indicating that the device has been powered on and is in pairing mode.

White Wireless Tag splashing in water, with text 'Waterproof and dustproof'.

Figure 2: The Wireless Tag is waterproof and dustproof.

2.2 App Installation and Binding

To bind your Wireless Tag, follow these steps:

  1. Ensure your mobile phone's Bluetooth is ON and it is connected to the Internet.
  2. Go to the Google Play Store and search for "Google Find My Device" or "Find Hub".
  3. Download and install the app. If already installed, ensure it's updated to the latest version.
  4. Open the "Google Find My Device" or "Find Hub" app and log in with your Google account.
  5. Bring your Wireless Tag close to your phone. A pop-up will show "Wireless Tag".
  6. On the pop-up bottom sheet, tap 'Connect'.
  7. Read and accept the prompts to complete the pairing process.
  8. The locator will be automatically searched. Click 'Connect', 'Agree', and 'Continue'.
  9. The Wireless Tag should now be successfully bound.

Watch the video below for a visual guide on the binding process:

Video 1: Demonstration of Wireless Tag setup and binding with an Android phone.

3. Operating Instructions

3.1 Locating Your Items

  • Find Nearby: If your device is within wireless signal range, select your device in the "Google Find My Device" app and tap "Play Sound" to locate it. When you get closer, it will make a beep. Once found, tap "Stop Sound" to silence the device.
  • Global Positioning: The Find My Device network helps track items even when they are far away. As long as there are Android devices around globally, you can track the location of your items.
  • Google Assistant: Use voice commands like "Hey Google, find my wallet" or "Hey Google, find my keys" with your Google Home or Pixel Watch.
White Wireless Tag with a map showing global positioning, text 'No distance limited Global Accurate positioning'.

Figure 3: Global accurate positioning capabilities of the Wireless Tag.

3.2 Lost Mode

If your item is lost, select the device in the "Google Find My Device" app and tap "Mark as lost". You will receive a notification when its location becomes available. You can also leave your contact information for the finder to contact you.

3.3 Device Sharing

You can share your Wireless Tag's location with others. In the "Google Find My Device" app, select the device and tap "Share Device". After the accessory owner confirms sharing, the accessory will be visible on the list in the recipient's Find My Device app. Both accounts will see the location updates and may ring the device locally.

Two smartphones displaying a map with a central Wireless Tag, text 'SUPPORTS DEVICE SHARING', 'Share your MiTag with others and allow two phones to track one MiTag location'.

Figure 4: Sharing your Wireless Tag with other users.

4. Maintenance

4.1 Battery Replacement

The Wireless Tag uses one CR2032 3V battery. To replace the battery:

  1. Insert a shell opening tool into the designated slot on the device.
  2. Rotate the shell opening tool 90 degrees to gently open the shell.
  3. Use your fingernails at the small gap on the side of your item locator to carefully open the case.
  4. Replace the old battery with a new CR2032 3V battery. Ensure the positive pole (+) with the text is facing upward.
  5. Close the case securely.

The Wireless Tag offers an enhanced battery life of up to 600 days.

Dark grey Wireless Tag attached to keys, partially submerged in water, text 'ENHANCED BATTERY LIFE UP TO 600 DAYS' and 'IP68 dust & water resistant'.

Figure 5: Wireless Tag with long battery life and water resistance.

5. Troubleshooting

5.1 Connection Issues with Google Find My Device App

  • Restart: Restart your phone and try connecting again.
  • Reset Device: Reset your Wireless Tag (see Section 5.4 for factory reset) and restart your phone's Bluetooth and cellular network, then restart the Google Find My Device App to repair.
  • Pairing Mode: Ensure your device is in pairing mode (it should beep after holding the function button for 3 seconds). If not, replace the battery.
  • Google Account: If you have multiple Google accounts, check all of them in the Find My Device app by tapping your account icon to switch. The item links to the primary account setup on your phone.
  • Bluetooth: Ensure Bluetooth is enabled on your phone.
  • Internet Connection: Your phone must be connected to the Internet to connect your Wireless Tag.
  • Fast Pair Bottom Sheet: If you don't see the fast pair bottom sheet, enable "Scan for nearby devices" in your phone settings (Settings > Devices & sharing > Devices). Also, consider enabling "Include debug results" if issues persist.
  • Dismissed Fast Pair: If you previously dismissed the fast pair bottom sheet too many times, the phone might interpret it as not wanting to see it. Check your phone's settings or try resetting the app's data.
  • Bluetooth Connections: Do NOT tap on '+ Pair new device' in Bluetooth settings. Google uses Fast Pair. If you have already paired via Bluetooth, perform a factory reset and forget the item from the Bluetooth pairing list.
  • Phone Compatibility: Google's Find My Device works on Android phones running Android 9 or higher and requires the latest version of Google Play Services.

5.2 Location Access and Accuracy

  • Location Permission: Ensure the "Google Find My Device" app has Location permission (Settings > Location > App permissions > Find My Device > Allow only while using the app).
  • Location Accuracy: For better indoor positioning, enable "Wi-Fi scanning" and "Bluetooth scanning" in your phone's Location services settings.
  • Find My Device Network Settings: Set your Find My Device network settings to "network in all areas" (Find My Device app > Settings > Find your offline devices). This improves location accuracy.

5.3 "Sync recent location" Message

If you see this message and cannot access your device's location:

  1. Remove your item from the Find My Device app (Tap on your device > Click on the engine icon > On the bottom of the page tap on "Remove from Find My Device").
  2. Factory reset your item (see Section 5.4).
  3. Reconnect the accessory to your Android device.
  4. Go back to Find My Device and reload your device list.

5.4 Factory Reset

To factory reset your Wireless Tag:

  1. Disconnect it from your Google account in the Find My Device app.
  2. Press the function button two times rapidly (you will hear one beep).
  3. Then, press the function button four times rapidly and hold it a fifth time until you hear a ring-ring chime. The device is now reset.

6. Specifications

FeatureDescription
Product NamePersonal Locator (Wireless Tag)
Compatible DevicesAndroid devices (Android 9 or higher)
AppGoogle Find My Device
Waterproof RatingIP67 Waterproof
Battery Type1 x CR2032 (included)
Battery LifeUp to 600 days
CertificationCE, FCC, RoHS
Dimensions (Product)Airtag Size
Package DimensionsLength: 13 cm, Width: 12 cm, Height: 3 cm
Package Weight0.037 kg
OriginMainland China

7. User Tips

  • For optimal tracking performance, ensure your Android device's location services are always enabled and set to high accuracy.
  • Regularly check the battery status in the Google Find My Device app to avoid unexpected power loss.
  • Consider attaching the Wireless Tag to items that are frequently misplaced, such as keys, wallets, or bags.
  • Utilize the device sharing feature to allow trusted family members or friends to help locate shared items.
  • The Wireless Tag comes in various fashionable colors (Pink, Green, White, Black) to match your style or help differentiate between multiple tags.

8. Safety Information

WARNING: Button Cell Battery Ingestion Hazard

  • This product contains a button cell or coin battery.
  • DEATH or serious injury can occur if ingested.
  • A swallowed button cell or coin battery can cause internal chemical burns in as little as 2 hours.
  • KEEP new and used batteries OUT OF REACH of CHILDREN.
  • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Battery Handling:

  • Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
  • Even used batteries may cause severe injury or death.
  • Non-rechargeable batteries are not to be recharged.
  • Do not force discharge, recharge, disassemble, heat above 50°C/122°F or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
  • Ensure the batteries are installed correctly according to polarity (+ and -).
  • Do not mix old and new batteries, different brands or types of batteries.
  • Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
  • Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

9. Regulatory Information

9.1 FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

10. Support

For more detailed information and diagrams, please refer to the full user manual available in PDF format:

View User Manual (PDF)

© 2023 All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.