intelamp YL08-1A-1

Contents

Intelamp Garden Solar Hanging Lamp

Model: YL08-1A-1

Brand: intelamp

1. Introduction

Thank you for choosing the Intelamp Garden Solar Hanging Lamp. This product is designed to provide efficient and eco-friendly lighting for your outdoor and indoor spaces. Featuring intelligent light control, IP65 waterproofing, and a durable design, it offers a convenient and reliable lighting solution. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.

Intelamp Solar Hanging Lamp in a garden setting, highlighting 50m² lighting area and 2 years warranty.
The Intelamp Solar Hanging Lamp illuminating a garden area.

2. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture. (This product is IP65 waterproof, but extreme submersion or high-pressure water jets should be avoided).
  • Handle with care to avoid cuts or injuries.

⚠ WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

3. Product Features

  • Intelligent Light-Controlled Switch: Charges automatically during the day and lights up when it gets dark, eliminating the need for manual operation.
  • Efficient Illumination: Provides 8-12 hours of nighttime lighting after 4-8 hours of direct sunlight. Equipped with a 5V/300mA polycrystalline silicon solar panel (18.5% photoelectric conversion rate) and a 2200mAh lithium battery, powering a 30W equivalent tungsten bulb.
  • Intelligent Discharge for Rainy Days: Features a patented intelligent discharge circuit that automatically reduces brightness on cloudy and rainy days to ensure continuous lighting.
  • IP65 Waterproof: Designed with good waterproof performance to withstand various outdoor weather conditions.
  • Easy Installation: Offers flexible installation options for the solar panel (bundle or screw fixing) and allows the bulb to be placed anywhere desired. Standard cable length is 3 meters.
Garden Decorative Pendant Lights with icons for solar power, auto on/off, remote control, and simple installation.
Key features of the Intelamp Solar Hanging Lamp.

4. Specifications

AttributeValue
Model NumberYL08-1A-1
Brand Nameintelamp
Power SourceSOLAR
Solar Panel5V/300mA Polycrystalline Silicon
Battery3.2V/2200mAh Lithium Battery
Light SourceLED bulbs (Edison light bulb type)
Light ColorWarm Yellow
Is Bulbs IncludedYes
Is DimmableNo (Brightness adjustable via remote control)
Protection LevelIP65
Charge Time4 hours (direct sunlight)
Light Time8-12 hours
Installation MethodSelf-contained (bundle or screw fixing)
Cable Length9.8 ft (3 meters)
UsageHOLIDAY (suitable for various outdoor/indoor decorative lighting)
StyleART DECO
Warranty2 Years
CertificationsCCC, CE, FCC, ROHS, UL
Product Specification diagram showing dimensions of solar panel (4.5in x 4.5in), lamp (5.9in diameter, 1.8in height), and 9.8ft cable length, along with a table of specifications.
Detailed product dimensions and specifications.

5. Package Contents

The package typically includes:

  • 1 x Solar Panel with mounting bracket
  • 1 x Pendant Lamp with Edison LED bulb
  • 1 x Connecting Cable (approx. 3 meters / 9.8 ft)
  • 1 x Remote Control
  • Installation Accessories (screws, wall plugs, cable ties)
  • 1 x User Manual (this document)
Components of the solar lamp: Polycrystalline silicon solar panels, 2000mAh Battery, Stainless steel lampshade, Edison light bulb.
Main components included in the package.

6. Installation

The Intelamp Solar Hanging Lamp is designed for easy, self-contained installation. Follow these steps for optimal performance:

  1. Preparation: Remove all protective films from the solar light casing and solar panel. Ensure the solar panel is unobstructed and free of stains.
  2. Solar Panel Placement: Install or place the solar panel in a location that receives direct sunlight for at least 4-8 hours daily. The solar panel needs to be installed in direct sunlight for efficient charging.
  3. Light Fixture Placement: The pendant lamp can be installed anywhere you want, as it connects to the solar panel via a 3-meter cable. Recommended installation height for the light fixture is 1.8-2.5 meters in a well-lit, unobstructed location.
  4. Mounting: Use the provided screws and wall plugs to securely fix the solar panel bracket to a wall, roof, tree, or path. The lamp can be hung or mounted using appropriate fixtures.
  5. Connection: Connect the cable from the solar panel to the lamp. Ensure the connection is secure.
Diagram showing correct and incorrect placement of the solar panel. Correct placement ensures direct sunlight, while incorrect placement shows shaded areas.
Ensure the solar panel is placed in direct sunlight for optimal charging.
Diagram illustrating multiple installation ways for the solar panel and pendant light, including wall mount, tree mount, railing mount, and ground stake.
Multiple installation options for the solar panel and lamp.
Various outdoor settings showing the solar pendant light installed on pergolas, walls, and trees.
Examples of the solar lamp installed in different outdoor environments.

7. Operation

  1. Power On: Locate the power switch on the side/bottom of the light fixture and switch it to the "ON" position to turn it on. Some models support a light-controlled mode; switch it to the "Auto" position, and the light fixture will automatically turn on after dark and automatically turn off at dawn.
  2. Automatic Charging: No manual charging is required. Once the solar panel is exposed to direct sunlight, it will automatically absorb sunlight and store electrical energy in the internal battery.
  3. Automatic Lighting: The lamp will automatically light up when it gets dark and turn off at dawn, thanks to its intelligent light control.
  4. Mode Selection (if applicable): A short press of the mode button (if present) cycles through lighting modes (e.g., constant light mode, flashing mode, sensor mode). In sensor mode, the light automatically turns on when it detects human activity and turns off after a 30-second delay when no one is around, making it more energy-efficient.
  5. Remote Control (if included): Use the provided remote control to adjust brightness (e.g., 100%, 75%, 50%), set timing (from 2 hours to 12 hours), and manually turn the light on/off.
Video demonstrating the product's features including charging, auto-on at dark, high brightness, fog bulb effect, brightness control by remote, timing by remote, low brightness mode, and multiple installation ways.
Intelligent Light Control feature showing 4 hours of charging during the day leads to 8 hours of lighting at night.
Intelligent Light Control: Automatic charging and lighting.
Intelligent Discharge feature showing how lamp brightness adjusts from 30W equivalent on sunny days to 10W equivalent on cloudy/rainy days to extend lighting time.
Intelligent Discharge: Brightness adjusts based on environment to extend light duration.

8. Maintenance

  • Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures maximum charging efficiency.
  • Storage: If the device will not be used for an extended period, turn it off and store it in a dry place, away from direct sunlight and moisture. Keep away from children.
  • Battery Care: For optimal battery life, avoid prolonged storage with a completely depleted battery. Charge the unit fully before storing.

9. Troubleshooting

  • Light not turning on at night:
    - Ensure the power switch is in the "ON" or "Auto" position.
    - Check if the solar panel is receiving sufficient direct sunlight during the day (at least 4-8 hours). Relocate if necessary.
    - Verify that the solar panel is clean and free of obstructions.
    - Ensure the cable connection between the solar panel and the lamp is secure.
  • Light is dim or short-lived:
    - The battery might not be fully charged due to insufficient sunlight. Ensure the solar panel gets maximum direct sunlight.
    - Cloudy or rainy weather can reduce charging efficiency and lighting duration. The intelligent discharge feature will adjust brightness accordingly.
    - The battery might be aging. Battery performance naturally degrades over time.
  • Light flickers or behaves erratically:
    - Check all connections for looseness.
    - Ensure the bulb is properly tightened.

10. User Tips

  • Bulb Installation: When installing the bulb, ensure it is properly tightened. Keep turning it until it feels secure to avoid issues where the light might not work, leading you to believe it's broken.
  • Optimal Placement: For best performance, position the solar panel where it receives unobstructed direct sunlight throughout the day. The lamp itself can be placed in a shaded area if desired, thanks to the separate panel design.
  • Winter Performance: In colder climates or during winter months, solar charging efficiency may decrease. Ensure the solar panel is clear of snow and ice.

11. Warranty and Support

This product comes with a 2-year warranty. For any issues or support needs, please contact the manufacturer:

  • Manufacturer: Shenzhen Jindian Electronic Technology Co., Ltd.
  • Address: No. 9, Tianyang 1st Road, Datianyang Industrial Zone, Dongfang Community, Songgang Street, Bao'an District, Shenzhen City, Guangdong Province.
  • Email: service@intelamp.com

For EU customers, you may also contact the authorized representative:

  • EU Authorized Representative: SUCCESS COURIER SL
  • Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain.
  • Email: successservice2@hotmail.com

12. Compliance Information

This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Our company has assessed the requirements and regulations applicable to this product based on its actual product type, function, and target market. The product meets the testing requirements of Shenzhen BCTC.

CE

This product is certified with CCC, CE, FCC, ROHS, and UL standards.

13. Additional Resources

A detailed user manual in PDF format is available for download. Please refer to the official product page or contact customer support for the link.

User manual (PDF): View PDF Manual

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.