LEXXSON NTG5.0 Becker Module

Contents

LEXXSON Wireless Carplay Android Auto Module User Manual

For Mercedes Benz C Class, GLC, V Class W447 NTG5.0 Systems

1. Introduction

This manual provides detailed instructions for the installation, setup, and operation of your LEXXSON Wireless Carplay Android Auto Module. This module integrates seamlessly with your Mercedes Benz NTG5.0 system, offering enhanced connectivity and smart features for a superior driving experience.

For a complete digital version of this manual, please refer to the official PDF: User Manual (PDF)

2. Functional Statement

CarPlay / Android Auto

The built-in vehicle machine interaction system of iPhone (CarPlay) and Android (Android Auto) cooperates with the central control knob button to provide voice command and control of phone, information, navigation, and music. It allows you to operate Siri voice interaction to obtain more information. The module supports both wireless and wired connections for Carplay and Android Auto, including voice control for phone calls, information retrieval, and navigation.

Reversing Video Input

The smart module can decode video signals and can be equipped with a rear-view video input. This intelligent module facilitates video decoding and allows for the installation of a rear-view camera.

LEXXSON Wireless Carplay Android Auto Module and Car Screen Interface
The LEXXSON Wireless Carplay Android Auto Module shown with its interface displayed on a Mercedes Benz car screen.

3. Setup and Installation

3.1 Kit Contents

The package includes the main module and the following accessories:

NTG 5 System Accessories and Module Dimensions
The main module with dimensions (13.6cm x 7cm x 2.2cm) and included accessories: Power cable, LVDS cable (1 pcs), and WiFi Antenna.
  • Main Module (Dimensions: 13.6cm x 7cm x 2.2cm)
  • Power Cable
  • LVDS Cable (1 piece)
  • WiFi Antenna

3.2 Confirm Your Car System

It is crucial to confirm your car's NTG system version before installation to ensure compatibility and correct setup. Refer to the visual guide below to identify your system based on the car console buttons and display.

Visual Guide to Identify NTG 4.0, 4.5, and 5.0 Systems
Comparison of NTG 4.0, NTG 4.5, and NTG 5.0 systems based on console button layout and display interface. The module is compatible with NTG 5.0 (identified by 'CLEAR' button in the center, flat buttons, and airbag light under car radio).

3.3 Suitable Models

This module is compatible with various Mercedes Benz models and years. Please check the table below to confirm your vehicle's compatibility.

Table of Compatible Mercedes Benz Models
Table listing Mercedes Benz A, B, CLA, CLS, E, G, GLA, GLC, GLE, GLS, SLK, S, CL, V, and X Class models with their respective chassis codes and compatible years (2014-2018).
Compatible Mercedes Benz Models (NTG5.0)
ClassChassis CodeYears
A ClassW1762016-2018
B ClassW2462016-2018
CLA ClassC1172016-2018
CLS ClassW2182015-2016
E Class sedanW2122015
E Class coupeC207 A2072015
G ClassW4632016-2017
GLA ClassX1562016-2018
GLC Classx253 C2532015-2018
GLE GLS ClassW167 X1662016-2018
SLKR1722016-2018
S ClassW2222014-2018
CL ClassW216 C2162014-2018
V ClassW4472015-2018
X ClassW4702015-2018

3.4 Toggle Switch (DIP) Setup

The module features toggle (DIP) switches that must be configured according to your specific car model and screen size. Incorrect settings can lead to display issues or non-functionality.

DIP Switch Location and Settings Table
Location of the toggle (DIP) switches on the module and the corresponding settings table for NTG5.0/5.1 systems, detailing configurations for different car models and screen resolutions.

Location of DIP Switches: The DIP switches are located on the side of the module, as indicated in the diagram above.

NTG5.0/5.1 Setting Table:

NTG5.0/5.1 DIP Switch Settings
Switch 1Switch 2Car Model
OFFOFFC/GLC/V/S
OFFONA/B/CLA/CLS/GLA/GLE/GLS/E
Switch 3Switch 4Screen Size
OFFON800*480 (7.4"/8.4")
ONOFF960*540 (8.4")
ONON1440*540 (12.3")

3.5 Cable Connection Chart

Follow the detailed wiring diagram below to connect the module to your car's existing system. Ensure all connections are secure to prevent issues.

Cable Connection Diagram for NTG 5 Module
Detailed wiring diagram showing connections for Power, LVDS, ANT, USB, and various audio/video inputs to the OEM Radio and OEM LVDS. Note: Do not place metal parts close to the connections.

After all cables are connected, long press the "Back" button on the car's control knob to switch between the NTG 5 original car interface and the CarPlay/Android Auto interfaces.

4. Operating Instructions

4.1 Wireless CarPlay Connection Method

To connect your iPhone wirelessly to CarPlay:

  1. Open the system's Wireless CarPlay connection settings.
  2. Turn on your phone's Bluetooth and Wi-Fi, and keep them active.
  3. Select the Bluetooth Device name (e.g., "CX_BT XXXX") on your phone. After pairing, confirm the request window to "Use CarPlay".

4.2 Wireless Android Auto Connection Method

To connect your Android phone wirelessly to Android Auto:

  1. Open the system's Wireless Android Auto connection settings.
  2. Turn on your phone's Bluetooth and Wi-Fi, and keep them active.
  3. Select the Bluetooth Device name (e.g., "CX_BT XXXX") on your phone. After successful Bluetooth pairing, follow the on-screen Android Auto connection process.
Wireless Connection Steps for CarPlay and Android Auto
Screenshots illustrating the steps for connecting wirelessly to CarPlay and Android Auto, including enabling Bluetooth/Wi-Fi and selecting the device.

4.3 Audio Settings

To ensure proper audio output, configure the audio settings as follows:

  1. Navigate to Setup > Audio settings.
  2. Ensure "Use the original Bluetooth audio" is set to ON.
  3. Connect your phone's Bluetooth to the car's Bluetooth (MB Bluetooth) and keep this Bluetooth Audio interface active.
  4. On your phone, select the car's Bluetooth as the audio source.

4.4 Steering Wheel and Control Knob Operation

The module is designed to be compatible with your original car controls. The functions may vary slightly depending on your specific car model.

Car Control Knob and Steering Wheel Button Functions
Diagrams showing the functions of the central control knob and steering wheel buttons for system interaction. Control knob: (1) Long press to switch system, (2) Short press to confirm, long press for voice control, Right dial 15s to reset. Steering wheel: (1) Long press to switch system, (2) Short press to answer, (3) Short press to hang up/activate, (4) Short press to adjust volume, (5) Long press to reset system.

Control Knob Functions:

  • Long press: Switch between original car system and module interface.
  • Short press: Confirm selection.
  • Long press (after short press): Activate voice control.
  • Right dial 15 seconds: Reset the system.

Steering Wheel Button Functions:

  • Long press: Switch between original car system and module interface.
  • Short press (phone icon): Answer a call.
  • Short press (hang up icon): Hang up a call or activate a function.
  • Volume buttons (+/-): Increase or decrease volume.
  • Long press (specific button, refer to diagram): Reset the system.

Note: Due to different car models, the exact operation method for some buttons may vary. Please consult customer service if you encounter discrepancies.

4.5 Mobile Music Play

Enjoy synchronous mobile music playback with Hi-Fi sound quality. The module supports popular music streaming applications, allowing you to play various genres directly through your car's sound system.

CarPlay Music Interface Display
The CarPlay interface displaying music playback, with icons for popular music apps like Apple Music, Spotify, YouTube Music, and Tidal.

5. Specifications

FeatureDetail
ModelNTG5.0 Becker Module
CompatibilityMercedes Benz C Class, GLC, V Class W447 and other NTG5.0 systems (2014-2018 models)
ConnectivityWireless/Wired CarPlay, Wireless/Wired Android Auto
InputReversing Video Input
ControlSupports original car control knob and steering wheel buttons
Dimensions (Module)13.6cm (Length) x 7cm (Width) x 2.2cm (Height)
Weight (Package)0.742 kg

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the module and connections. Avoid using liquid cleaners or solvents.
  • Environment: Keep the module away from extreme temperatures, direct sunlight, and moisture.
  • Connections: Periodically check all cable connections to ensure they are secure and free from damage.

7. Troubleshooting

Issue: Screen is black or module is not functioning after installation.
Solution:
  1. Verify all cable connections are secure according to the connection chart (Section 3.5).
  2. Check the DIP switch settings (Section 3.4) to ensure they match your car model and screen size. Incorrect settings are a common cause of display issues.
  3. Ensure the car's ignition is fully on and the system has power.
  4. Try resetting the module by long-pressing the appropriate control button (refer to Section 4.4).
Issue: Android Auto/CarPlay works, but there is no audio, or original radio/steering wheel buttons are not working.
Solution:
  1. Check the Audio Settings (Section 4.3) to ensure "Use the original Bluetooth audio" is enabled.
  2. Confirm your phone's Bluetooth is connected to the car's MB Bluetooth and the car's Bluetooth is selected as the audio source on your phone.
  3. Re-verify all cable connections, especially those related to audio and CAN bus, as per the connection chart (Section 3.5).
  4. Ensure the module is correctly integrated with the original car system by switching interfaces using the "Back" button (Section 3.5).
Issue: Cannot connect wirelessly to CarPlay/Android Auto.
Solution:
  1. Ensure both Bluetooth and Wi-Fi are enabled on your phone.
  2. Confirm the correct Bluetooth device name (e.g., "CX_BT XXXX") is selected and paired on your phone.
  3. Restart both your phone and the car's infotainment system.
  4. Ensure no other devices are interfering with the Bluetooth or Wi-Fi connection.

8. User Tips

  • Seamless Integration: For the best experience, ensure all connections are firm and DIP switches are set correctly. This helps the module integrate smoothly, giving it an 'original and new' feel within your car's system.
  • Wireless Functionality: The module supports wireless CarPlay and Android Auto. Always ensure your phone's Bluetooth and Wi-Fi are active for a stable wireless connection.

9. Frequently Asked Questions (FAQ)

Q: Can I browse TikTok or watch YouTube directly on the car screen with this module?
A: The module provides Apple CarPlay and Android Auto functionality. These systems mirror compatible applications from your smartphone to the car's display. If TikTok or YouTube are supported by CarPlay/Android Auto on your phone, they will be accessible. This module does not run a full Android operating system independently.
Q: Is this module suitable for a Mercedes GLC 2017 with Comand?
A: Please refer to the "Suitable Models" table in Section 3.3. For GLC Class (x253 C253) models from 2015-2018, this module is compatible. Ensure your system is NTG5.0.
Q: Is this module compatible with a Mercedes C-Class 2017?
A: Yes, for C-Class (W205) models from 2015-2018, this module is compatible. Please verify your car's NTG system is NTG5.0 as described in Section 3.2.

10. Warranty and Support

For any technical assistance, warranty claims, or further inquiries, please contact the seller directly through the platform where you purchased the product. Ensure you have your purchase details and product model information ready.

You can also refer to the comprehensive User Manual (PDF) for additional details and diagrams.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.