1. Product Overview
Thank you for choosing the Intelligent Temperature Display Mixing Cup. This product is designed for convenience and efficiency in stirring various beverages.
It is suitable for home, hotel, office, and other occasions, used for stirring coffee, fruit juice, powder, milk powder, granules, and similar non-stick beverages. Its features include a magnetic stirring mechanism, an LED temperature display, and a durable 316 stainless steel inner liner.

Figure 1: The Intelligent Temperature Display Mixing Cup highlighting its one-key switch and intelligent temperature measurement.
For a detailed user manual in PDF format, please refer to the official document: User Manual (PDF).
2. Safety Precautions
To ensure safety and avoid harm or property damage, please adhere to the following precautions:
- Keep Out of Reach of Children: This product is not a toy. Keep it away from children and do not allow them to operate it alone.
- Internal Stirrer: The mixing cup contains a stirrer. Ensure children do not accidentally ingest it or get burned by hot drinks.
- Supervision Required: It is prohibited for individuals with physical, visual, intellectual, or other impairments (including children) to use this product unless supervised by someone responsible for their safety and providing guidance.
- No Food During Rotation: Do not pour food into the cup while the mixer is rotating.
- Avoid Heat Sources: Do not place this product directly on fire or near any heat source or ignition source. Doing so may damage the product, cause malfunction, or create a hazard.
- Intended Use: Use this product only for its intended purpose of stirring beverages.
- Maximum Temperature: The maximum operating temperature should not exceed 100 °C (212 °F).
- Packaging Disposal: After opening, dispose of the plastic bag in the trash to prevent suffocation risks, especially for children.
- Not Suitable For: This product is not suitable for freezing, dishwasher cleaning, or microwave heating.
- Cleaning: Always ensure the product is thoroughly cleaned before each use.
3. Setup and First Use
3.1. Charging the Mixing Cup
- Locate the Type-C charging port on the handle of the mug.
- Connect the provided Type-C cable to the mug and to a power adapter (≤ 5V02A). Do not use a computer for charging. For optimal charging, use a high-power charging adapter.
- During charging, the numbers on the LED display will jump.
- The LED display will show a steady number when the mug is fully charged.
- After charging, ensure the USB silicone cover is securely closed to protect the port.
4. Operating Instructions
4.1. Adding Ingredients
Open the lid by sliding the cover. Pour your desired beverage (coffee, milk, juice, powder, etc.) into the mug. Ensure the magnetic stirring capsule is at the bottom of the cup.

Figure 2: How to open the sliding lid for adding ingredients or drinking.
4.2. Activating Stirring
- Ensure the lid is securely placed on the mug.
- Double-click the power button on the handle to start the stirring function. The LED display will show the battery level briefly.
- The mug will stir for approximately 30 minutes and then automatically stop.
- To pause stirring before the 30-minute cycle ends, click the power button once.

Figure 3: The powerful 7000 RPM stirring action ensures thorough mixing.
4.3. Temperature Display
To view the current temperature of your beverage, lightly touch the power button. The LED display on the handle will show the temperature in degrees Celsius.

Figure 4: The LED display shows the current beverage temperature, for example, 44°C.
4.4. Product Demonstration Video
Video 1: A demonstration of the mixing cup's features and operation.
5. Maintenance and Cleaning
The mixing cup features a 316 stainless steel inner liner, which is preferred for its durability and ease of cleaning.

Figure 5: The interior of the mug is made from high-quality 316 stainless steel.
- After Each Use: Empty the mug and rinse the interior with warm water.
- Thorough Cleaning: Use a soft sponge and mild detergent to clean the inside of the mug.
- Magnetic Stirrer: The magnetic stirring capsule can be removed for separate cleaning. Ensure it is properly placed back at the bottom of the cup before next use.
- Exterior: Wipe the exterior with a damp cloth. Do not immerse the entire mug in water, especially the handle area where electronic components are housed.
- Drying: Allow all parts to air dry completely before storing.
- Avoid: Do not use abrasive cleaners, scourers, or harsh chemicals, as these can damage the stainless steel finish or other components.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mug does not stir | Low battery; Magnetic stirrer not in place; Not double-clicked | Charge the mug; Ensure stirrer is at the bottom; Double-click the power button firmly |
| Temperature display not working | Low battery; Not touched lightly | Charge the mug; Lightly touch the power button once |
| Mug does not charge | Cable or adapter issue; Port not clean | Try a different Type-C cable/adapter; Ensure charging port is clean and free of debris |
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | Intelligent Temperature Display Mixing Cup |
| Model | DTM-663 |
| Brand | CREAROMA |
| Capacity | 400ML |
| Rated Voltage (Input) | 5V |
| Operating Voltage | 3.7V |
| Power | 0.6W |
| Power Supply Type | Type-C Charging Port |
| Product Material | ABS, PP, Silicone, 316 Stainless Steel, PTFE |
| Mixing Time | 30 minutes (automatic stop) |

Figure 6: Key specifications and features of the mixing cup.
8. User Tips
Based on user feedback, here are some tips for optimal use:
- For best results with powdered drinks, add the powder after the water/milk to prevent clumping at the bottom.
- Ensure the magnetic stirring capsule is always clean and properly seated for efficient mixing.
- Regularly check the charging port for any debris to ensure a good connection.
9. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for warranty claims.