1. Introduction
Thank you for purchasing the HYULIGHTS HYU-150B 200W Moving Head Light. This professional moving head light is a powerful and versatile device designed for stage and DJ applications. Every unit has been thoroughly tested and shipped in perfect operating condition.
Please carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and ensure all necessary accessories to operate the unit have arrived intact. In case damage is found or parts are missing, please contact customer support for further instructions. Do not return this unit to your dealer without first contacting customer support.
For a comprehensive guide, you may also refer to the official user manual PDF: User Manual (PDF).
Safety Warnings
CAUTION!
- Keep this device away from rain and moisture!
- Unplug mains lead before opening the housing.
Every person involved with the installation, operation, and maintenance of this device has to:
- Be qualified.
- Follow carefully the instructions in this manual.
2. Package Contents
Inside the carton box, you should find:
- One power cable
- One user manual
- One pcs light fixture
- One pcs DMX cable
- One pcs omega bracket
Contents of the HYULIGHTS moving head light package, including light fixture, cables, omega bracket, and manual.
3. Mounting and Installation
3.1. Cautions
- For added protection, install fixtures outside walkways, seating areas, or areas where unauthorized persons may come into contact with fixtures.
- Before mounting the luminaire to any surface, ensure that the mounting area can withstand a minimum point load of 10 times the weight of the unit.
- Clamp installations must always be secured using secondary safety accessories such as appropriate safety cables.
- Never stand directly beneath the unit when installing, removing, or servicing the light fixture from the ceiling or when setting it up on a flat, level surface.
- Make sure the fixture is at least 0.5m (1.5ft) away from any flammable objects (decorations, etc.).
- Overhead installation requires extensive experience, including calculation of working load limits, in-depth knowledge of the installation materials used, and regular safety inspections of all installation materials and fixtures. If you lack these qualifications, do not attempt to install it yourself, as improper installation may result in personal injury.
- Be sure to complete all fitting and installation procedures before connecting the mains power cord to a suitable wall outlet.
3.2. Mounting Points
The LED moving head light offers a unique mounting bracket assembly that integrates the bottom of the base, included "omega bracket," and safety cable rigging points in one unit.
The mounting system consists of:
- (1) Omega-holders
- (2) Clamp
- (3) Safety-rope
- (4) Quick-lock fastener
The diagram illustrates how the omega bracket attaches to the base of the light, providing secure points for clamps and safety ropes. The quick-lock fasteners ensure a stable connection.
3.3. DMX-512 Control Connection
Connect the supplied XLR cable to the 3-pin XLR female output of the controller and the other end to the 3-pin XLR male input of the moving head. You can chain multiple moving heads together via a serial link. The required cable should be a two-conductor shielded cable with XLR input and output connectors.
The DMX connection diagram shows:
- DMX Output (3-Pin XLR Socket): Pin 1: Ground, Pin 2: Data (-), Pin 3: Data (+).
- DMX Input (3-Pin XLR Socket): Pin 1: Ground, Pin 2: Data (-), Pin 3: Data (+).
- Common Connection: DMX+ connects to Pin 2 (Data -) and DMX- connects to Pin 3 (Data +) for DMX512 OUT. For DMX512 IN, DMX+ connects to Pin 1 and DMX- connects to Pin 2.
Rear view of the HYULIGHTS moving head light showing connection ports.
4. Menu Function
The device features an LED display screen for control and configuration. The main menu functions are categorized as SETTING, TEST, OFF set, and ADVANCE.
4.1. SETTING (Run Mode)
| Setting | Options/Range | Description |
|---|---|---|
| Run mode | DMX, Sound, Auto 1-4, Rand | Selects the working mode. |
| Address | 1-512 | Sets the DMX address code. |
| Channel | 14 channel | Sets the DMX channel mode. |
| Sound Sensitivity | 1-99 | Adjusts the sensitivity for sound control mode. |
| Invert Pan | OFF/ON | Inverts Pan movement. |
| Invert Tilt | OFF/ON | Inverts Tilt movement. |
| Swap Pan Tilt | OFF/ON | Swaps Pan and Tilt functions. |
| Code wheel | OFF/ON | Enables/disables encoding Code wheel correction. |
| Signal timeout | KEEP / CLEAR | Determines behavior upon DMX signal loss. |
| Screen Saver | OFF/ON | Activates/deactivates screen saver. |
| Colour Smooth | OFF/ON | Enables/disables smooth color transitions. |
| Load Factory Set | Confirm | Restores factory default settings. |
4.2. TEST Mode
Lights system password: 123456
Note: If the lights do not have any operating problems, do not adjust it incorrectly. System settings require professional guidance and execution. Avoid confusion in the lights system.
Corresponding to the channel, the initial value will change with the change of the Selfie mode, or the value of the console mode, which can be set in the channel mode.
| Test Parameter | Range |
|---|---|
| Dimmer | 0-255 |
| Strobe | 0-255 |
| Pan | 0-255 |
| Pan Fine | 0-255 |
| Tilt | 0-255 |
| Tilt Fine | 0-255 |
| Pan Tilt Time | 0-255 |
| Colour | 0-255 |
| Gobo | 0-255 |
| Focus | 0-255 |
| Frost & Color wheel | 0-255 |
| Prism Rotation | 0-255 |
| Macro | 0-255 |
| Reset | < |
4.3. OFF Set
Adjusts the offset values for various parameters.
| Parameter | Range | Description |
|---|---|---|
| Pan Set | (-128) - (+127) | Adjusts the offset in the pan direction. |
| Tilt Set | (-128) - (+127) | Adjusts the offset in the tilt direction. |
| Colour Set | (-128) - (+127) | Adjusts the offset of the color. |
| Gobo Set | (-128) - (+127) | Adjusts the offset of the gobo. |
| Focus Set | (-128) - (+127) | Adjusts the shift of focus. |
| Frost color Set | (-128) - (+127) | Adjusts the offset of the frost color. |
4.4. ADVANCE Settings
- Language switch: Switch the menu language to Chinese or English.
- Screen Rot: Switches the display orientation of the screen.
- Hours Clear: Clears the total usage time.
- Maximum protection temperature: After the detection temperature exceeds the protection temperature, the brightness decreases.
4.5. HARDWARE Information
Displays hardware-related information and status.
| Parameter | Value |
|---|---|
| Pan Hall | X |
| Tilt Hall | X |
| Colour Hall | X |
| Gobo Hall | X |
| Gobo Hall 2 | X |
| Focus | X |
| Hall 7 | X |
| Pan Code Wheel | XX |
| Pan Steps | XXXXX |
| Tilt code wheel | XX |
| Tilt Steps | XXXXX |
4.6. SYSINFO (System Information)
Displays general system information.
| Parameter | Value |
|---|---|
| Version | XXXXXXXXXX |
| Total Hours | XXXXX |
| On Hours | XXXXX |
| Temperature | XXX |
| Hours Clear | Confirm OK |
| Top Protection temperature | 0-120 |
4.7. DMX Channels
The DMX channel assignments for controlling the moving head light are detailed below:
| Channel | Function | Channel Set | Instructions |
|---|---|---|---|
| 1 | Dimmer | 0-255 | Dimmer 0-255 |
| 2 | Strobe | 0-10 11-255 | No Strobe From slow to fast Strobe |
| 3 | Pan | 0-255 | Pan |
| 4 | Pan fine | 0-255 | 16bit Pan fine |
| 5 | Tilt | 0-255 | Tilt |
| 6 | Tilt fine | 0-255 | 16bit Tilt fine |
| 7 | Pan Tilt speed | 0-255 | Pan Tilt Speed adjustment |
| 8 | Color | 0-4 5-9 10-14 15-19 20-24 25-29 30-34 35-39 40-44 45-49 50-54 55-59 60-64 65-69 70-74 75-79 80-84 85-89 90-94 95-99 100-104 105-109 110-114 115-119 120-200 201-255 | White White light+ color 1 Color 1 Color 1+ color 2 Color 2 Color 2+ color 3 Color 3 Color 3+ color 4 Color 4 Color 4+color 5 Color 5 Color 5+ color 6 Color 6 Color 6+ color 7 Color 7 Color 7+ color 8 Color 8 Color 8+ color 9 Color 9 Color 9+ color 10 Color 10 Color 10+ color 11 Color 11 Color 11+White Color clockwise fast to slow Color clockwise slowly to fast |
| 9 | GOBO | 0-5 6-10 11-15 16-20 21-25 26-30 31-35 36-40 41-45 46-50 51-55 56-60 61-65 66-70 75-80 81-150 151-200 201-255 | White Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Gobo 10 Gobo 11 Gobo 12 Gobo 13 Gobo 14 Gobo shake 1-14 Gobo clockwise fast to slow Gobo clockwise slowly to fast |
| 10 | Focus | 0-255 | Focus |
| 11 | Magnification lens & 7-Color wheel | 0-127 128-191 192-255 | Off Magnification lens 7-Color wheel |
| 12 | Prism | 0-127 128-136 137-255 | Off 24 Prism Prism is slow to fast rotate |
| 13 | Macro function | 0-5 6-55 56-105 106-155 156-205 206-255 | NO effect Auto 1 Auto 2 Auto 3 Auto 4 Random mode |
| 14 | Restoration | 0-25 26-76 77-127 128-255 | NO effect Motor reset XY Motor reset Completely reset |
HYULIGHTS moving head light projecting colorful beams.
HYULIGHTS moving head light projecting star-shaped gobo patterns.
5. Specifications
| Feature | Detail |
|---|---|
| Voltage | AC110-240V 50-60Hz |
| Light source | 200W White LED |
| Total power | 250W |
| Control panel | LED Display Screen |
| Pan scan | 540° (16bit) Electric correction |
| Tilt scan | 270° (16bit) Electric correction |
| Color wheel | 12 Colors + Half color effect + Color rotating speed. Infinite rotating, 1PCS 7-Color wheel |
| Gobo wheel | 14 Gobos + Shake + Gobo Rotating speed. Infinite rotating |
| Prism | 1pcs 24 Rotating prisms |
| Magnification lens | 1PCS 6 X Magnification lens |
| Beam zoom angle | 1.5° - 15° |
| Functions | Sound control, Auto, Master/Slave, DMX 512, RDM |
| Strobe | 25 times/sec |
| DMX channel | 14 channels |
| Dimmer | 0-100% With regulated constant color control |
| Net Weight (N.W) | 6.7KG |
| Gross Weight (G.W) | 7.8 KG |
| Packing size | 41*28*27.5cm |
| Luminous Flux | >82000 |
| Installation Method | Self-contained |
| Certification | CE, RoHS, UL, WEEE |
Diagram showing the 24 rotating prisms, 6x magnification lens, and 7-color wheel components of the moving head light.
6. Maintenance
To ensure the longevity and optimal performance of your moving head light, follow these maintenance guidelines:
- Regularly clean the lenses and exterior surfaces with a soft, lint-free cloth to prevent dust and debris buildup.
- Ensure proper ventilation around the fixture during operation to prevent overheating.
- Always unplug the unit from the mains power before performing any cleaning or maintenance.
- Avoid exposing the device to rain, moisture, or extreme temperatures.
- Periodically check all cables and connections for any signs of wear or damage.
7. Troubleshooting
- General Operation: If the lights do not have any operating problems, avoid making unnecessary adjustments to system settings. These settings often require professional guidance and execution to prevent confusion in the lights system.
- Fan Noise: Some users have noted fan noise during operation. This is often a normal characteristic of high-power lighting fixtures designed for cooling. Ensure the fan vents are clear of obstructions.
8. User Tips
- For the best visual effect, this product can be paired with a fog machine.
- While fan noise is present, the overall performance and functionality of the light are generally well-regarded.
9. Warranty & Support
Customer Service:
If you are not completely satisfied or the item isn't what you expected, please contact us within 30 days for a full refund unconditionally.
Friendly Reminder: It's better to contact us than leaving a negative shopping experience. Your satisfaction is our priority, and we will do our best to serve you.
Quick Response within 12 Hours: You can contact us without any hesitation at any time of the day, and we will reply to you within 12 hours. (It would be appreciated if you could provide us with a video or pictures, if available).
2-year Warranty: We will send you brand new items for free or give you a full refund if any quality problems occur within 2 years from the date of purchase.
Contact Information: You can contact us by sending an email to support@dvdjstagelights.com.
10. Statement of Compliance
Important Notes: This special page helps aggregate consumer reviews and sales volume of similar items offered by multiple overseas merchants for your easy reference.
Information of the Seller: The seller of this item is HYULIGHTS Shop Store.