CARABC Wireless CarPlay Android Auto Module for SMEG & MRN Systems

Contents

CARABC Wireless CarPlay & Android Auto Module User Manual

For Peugeot & Citroen Vehicles with SMEG & MRN Systems

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your CARABC Wireless CarPlay & Android Auto Module. This module integrates Apple CarPlay and Android Auto functionalities into your vehicle's existing infotainment system, enhancing your driving experience with navigation, music, communication, and more.

Compatible Systems: SMEG & MRN

Compatible Vehicles: Citroen C4, C5, DS3, DS4, DS5 & Peugeot 208, 308, 508, 3008.

2. Product Information & Package Contents

The CARABC module allows for seamless integration of smartphone features into your car's display. It supports wireless and wired CarPlay/Android Auto, screen mirroring, and can be equipped with a rear-view video input.

CARABC Wireless CarPlay Android Auto Module and accessories

Figure 1: Main module and included accessories (Power cable, CAN Gateway Cable, WIFI Antenna).

Package Contents:

  • CARABC Wireless CarPlay & Android Auto Module
  • Power Cable
  • CAN Gateway Cable
  • WIFI Antenna
  • LVDS Cable (typically pre-attached or separate)
  • USB Cable

3. Specifications

Operating Voltage9-16V
Operating Temperature-30°C to +75°C
Stored Temperature-30°C to +85°C
Environment Humidity≤98% (at 45°C), 65±5% (rated)
Power Consumption500mA (rated), 3A (Max)
Shutdown Current3 mA (Clock is on)
Quiescent CurrentLess than 3 mA
USB Charging Current≤2A (Host activates circuit protection to control current below 1.5A if >1A)

4. Setup and Installation

CAUTION: Installation should ideally be performed by a professional. Ensure the vehicle's power is OFF and the CarPlay module's power is DISCONNECTED before making any connections or adjusting dip switches.

4.1. Dip Switch Settings

Adjust the dip switches on the module according to your vehicle's configuration. Ensure the module is powered off before making any changes.

13-16 Peugeot/Citroen SETTING
Dip 1Dip 2Car Model Setting
OFFOFFDefault
OFFONAnother reverse data
Dip 3Dip 4Screen Size Setting
OFFOFF800*480 7"

4.2. Wiring Connection (Peugeot Citroen MRN)

Follow the diagram carefully for proper connection. Ensure all connections are secure and not forced.

Main module with LVDS, ANT, POWER ports

Figure 2: Overview of the module's connection ports (LVDS, ANT, POWER).

Connection Points:

  • LVDS: Connect to the original vehicle's LVDS cable.
  • ANT: Connect the provided WIFI Antenna.
  • POWER: Connect the main power cable harness.

Power Cable Wiring Details:

  • Yellow: B+ (Battery Positive)
  • Red: ACC (Accessory Power)
  • Black: GND (Ground)
  • Blue: Camera Power Supply (if applicable)

Other Cable Connections:

  • Brown: Rear detect (Connect to rearview light cable or 360 panoramic detection cable).
  • White (360-TX): Connected to 360 panoramic universal box TXD.
  • White and Black (360-RX): Connected to 360 panoramic universal box RXD.
  • REAR-CVBS: Connect to rearview camera or 360 degree panoramic AHD output.
  • FRONT-CVBS: Connect to the frontview camera.
  • AUX: Audio output.
  • USB: Connect mobile phone, USB flash drive, or for software upgrade.

Important Notes for Audio:

  1. Before switching to the CarPlay interface, connect your phone to the original car's Bluetooth and select both call and media. Then, select the original car audio on the Bluetooth stereo interface.
  2. Alternatively, before switching to the CarPlay interface, switch the original car sound channel to the AUX channel.

Optical Fiber Cable:

If there is an optical fiber cable on the original power cable, you need to carefully remove it and transfer it to the power cable of the CarPlay box.

5. Operating Instructions

5.1. Wireless CarPlay Connection

  1. On your iPhone, open Wi-Fi and Bluetooth.
  2. On the car screen, navigate to "Wireless CarPlay Settings" and select "Discover and connect devices".
  3. On your iPhone's Bluetooth settings, select the device name starting with "CX_BT....." and pair it. CarPlay should now activate wirelessly.

5.2. Wireless Android Auto Connection

  1. On your Android phone, open Wi-Fi and Bluetooth.
  2. On the car screen, navigate to "Wireless Android Auto Settings".
  3. On your Android phone's Bluetooth settings, select the device name starting with "CX-BTXXXX" and pair it. Android Auto should now activate wirelessly.

5.3. Voice Control

The module supports voice control (Siri for CarPlay, Google Assistant for Android Auto) allowing you to make calls, play music, get directions, and more, hands-free.

Voice control interface with example commands

Figure 3: Voice control functionality for hands-free operation (e.g., "Navigate to home", "Play music", "Call John").

5.4. Original Vehicle Button Control

The module integrates with your vehicle's existing steering wheel controls for a seamless experience.

Steering wheel button functions for module control

Figure 4: Steering wheel button functions for system control.

  • Long press: Switch between the original system and the CarPlay/Android Auto system.
  • Short press (Phone button): Answer or hang up a call.
  • Long press (Phone button): Activate voice control (Siri/Google Assistant) without using the original car Bluetooth.
  • Short press (Volume buttons): Increase or decrease volume.

5.5. Car Settings (Module Interface)

Access the module's settings menu to configure various features:

Advanced Features:

  • Parking Guideline
  • Park Distance Control
  • Original Camera
  • 360 Panoramic
  • AHD Camera Type
  • View
  • Front View
  • Reverse Exit Delay

Audio Settings:

  • Volume
  • MIC Sensitivity
  • EQ
  • Original MIC
  • Use the original Bluetooth Audio
  • Automatic Echo Cancellation

Audio Setting Note: If your car has a Bluetooth phone function, an external microphone is generally not needed.

  • To use the original multimedia selection AUX: Go to Setup -> Audio Settings -> "Use the original Bluetooth Audio" -> OFF.
  • For cell phone Bluetooth connection to the original car Bluetooth audio (select Bluetooth audio playback): Go to Setup -> Audio Settings -> "Use the original Bluetooth Audio" -> ON.

Adding Reversing Camera Wiring:

  • Cam-power: Connect to the camera's power supply.
  • Rear-CVBS/AHD720P (25FPS/30FPS): Connect to the camera's video input.

6. Troubleshooting

  • Screen not displaying normally: Check the LVDS cable connection and verify the DIP Switch settings are correct for your vehicle.
  • Sound problems: Ensure the Multimedia and installation system settings of your original car are correctly configured, especially the AUX input selection.
  • Mainframe pilot lamp not working: Check the power cable connections to the module and inspect the vehicle's fuse related to the infotainment system.

7. User Tips

  • For optimal performance, ensure your smartphone's operating system (iOS or Android) is up to date.
  • If experiencing intermittent connectivity, try restarting both your phone and the car's infotainment system.
  • Keep the module's firmware updated if new versions become available (usually via USB).
  • Ensure your phone's Wi-Fi and Bluetooth are always enabled for wireless CarPlay/Android Auto to connect automatically.

8. Maintenance

The CARABC module requires minimal maintenance. Keep the unit free from dust and moisture. Do not attempt to open the module casing, as this will void any potential warranty.

9. Warranty and Support

For warranty information and technical support, please refer to the seller's terms of service or contact CARABC customer support directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.