1. Product Overview
The KALADA RGB Ambient Light Turbine Nozzle Air Vents are designed to upgrade the interior aesthetics of specific Mercedes Benz models by replacing the standard air vents with illuminated turbine-style nozzles. This system integrates with the vehicle's existing ambient lighting controls (where applicable) to provide a customizable and modern lighting experience.
The product offers various color options, including 3-color, 7-color, and 64-color variants, depending on the specific model and year of your vehicle and the chosen kit. It operates on a 12V power supply.
2. Safety Information
Please read all instructions carefully before installation. Improper installation may cause damage to the product or your vehicle's electrical system. If you are unsure about any step, it is recommended to seek professional installation.
- Ensure the vehicle's power is off before beginning installation.
- Handle all components with care to avoid damage.
- Do not modify the wiring harness unless explicitly instructed.
- Keep children away from installation area and small parts.
3. Installation Guide
This section provides a general overview of the installation process. For detailed, step-by-step instructions and specific wiring diagrams, please refer to the official PDF user manual available at: User Manual (PDF).
3.1. Components Overview
Ensure you have all necessary components as shown in Figure 3, including the control module, front air outlet wiring, central control patch cord, and rear air outlet wiring, specific to your vehicle model and desired color option.
3.2. General Installation Steps
- Preparation: Ensure the vehicle is turned off and the battery is disconnected if required for safety.
- Accessing Air Vents: Carefully pry out the rear panel and other trim pieces to access the existing air vents. Note that some panels may not have screws and are held by clips.
- Removing Original Vents: Gently remove the original air outlets. For some models, you may need to press buckles to release the original air outlet switch.
- Transferring Components: If applicable, remove the outer ring or other accessories from the original car air outlet and insert them into the new turbine nozzle accessories.
- Wiring Connection: Connect the provided wiring harness. This typically involves connecting to the central control ambient light system. The extension cord may need to be routed from the side to the back of the console.
Figure 4: Example of a wiring connection point during installation. - Installing New Vents: Install the lamp holder onto the new air outlet, then install the outer ring. Carefully place the new turbine air vents into their respective positions.
- Testing: Reconnect the battery (if disconnected) and test the functionality of the ambient lights before reassembling all trim pieces.
- Reassembly: Reinstall all removed panels and trim pieces, ensuring they are securely fastened.
4. Operating Instructions
The RGB ambient lighting system is designed to integrate with your vehicle's original control system, allowing for seamless adjustment of colors and brightness.
4.1. Control and Adjustment
The ambient lights can typically be controlled and adjusted through the vehicle's central control screen or central control gear lever, depending on your Mercedes Benz model and year.
- For Class C 2019-2021 / GLC 2020-2021: Adjustments are made via the ambient light adjustment interface on the central control screen.
- For Class C 2015-2018 / GLC 2015-2019: Adjustments are made via the ambient light adjustment interface, often controlled by the central control regulation knob.
Refer to your vehicle's infotainment system manual for specific navigation to the ambient lighting settings.
4.2. Light Effects
The turbine air vents provide a dynamic and elegant lighting effect, visible both when the lights are on and off.
5. Maintenance
To ensure the longevity and optimal performance of your ambient light air vents, follow these general maintenance guidelines:
- Cleaning: Use a soft, dry, or slightly damp cloth to wipe the surface of the air vents. Avoid abrasive cleaners or solvents that could damage the finish or LED components.
- Inspection: Periodically check the wiring connections to ensure they are secure and free from wear or damage.
- Avoid Excessive Force: Do not apply excessive force when adjusting the air vents, as this could damage the internal mechanisms or LED wiring.
6. Troubleshooting
If you encounter any issues with your KALADA ambient light air vents, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights not turning on | Loose wiring connection, incorrect wiring, power issue, faulty module. | Check all wiring connections for tightness. Verify wiring against the PDF manual. Ensure vehicle power is on. If a control module is included, ensure it is correctly installed and functioning. |
| Lights not changing color/brightness | Incorrect settings in vehicle infotainment, control module issue, wiring issue. | Verify settings in your car's central control screen. Ensure the control module (if separate) is properly connected. Check for any loose connections in the wiring. |
| Poor fit of rear vents | Minor manufacturing variance, specific vehicle trim differences. | Carefully adjust the fit. Some users have reported needing minor adjustments for a perfect fit on rear vents. |
| Installation difficulty | Lack of experience with car interior modifications. | Refer to the detailed PDF manual. If still challenging, consider professional installation. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | KALADA |
| Item Type | Atmosphere lamp |
| Voltage | 12 V |
| Origin | Mainland China |
| Hign-concerned Chemical | None |
| Package Length | 40 cm |
| Package Width | 23 cm |
| Package Height | 12 cm |
| Package Weight | 1.182 kg |
| Compatible Models | Mercedes Benz W205 C-Class, GLC X253, W213 E-Class, W222 S-Class |
| Color Options | 3-color, 7-color, 64-color (model/year dependent) |
8. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact your seller directly. Keep your purchase receipt as proof of purchase.
For detailed installation instructions and further product information, please refer to the official PDF user manual: User Manual (PDF).
9. User Tips
- Professional Installation: While some users find the installation straightforward, others report it can be challenging for amateurs. If you are not confident with car electrical systems or interior trim removal, professional installation is highly recommended.
- Rear Vent Fitment: Some users have noted that the rear vents might require a bit more care or minor adjustments to achieve a perfect fit. Take your time during this step.
- Wiring Clarity: The provided wiring guides may sometimes be basic. Refer to the comprehensive PDF manual and, if necessary, consult online resources or a professional for specific wiring details for your vehicle model.
- Integration: The control module allows for color synchronization with your car's original ambient lighting, enhancing the overall effect. Explore these settings in your vehicle's infotainment system.
- App Control: If your kit includes app control functionality, ensure you download the correct app and familiarize yourself with its features for easy color and brightness management.
10. Frequently Asked Questions (FAQ)
- Q: Is a control module included with the W205 2015 kit?
- A: Yes, a control module is typically included as part of the kit to manage the ambient lighting features.
- Q: Are these compatible with a GLC X253 without existing colored ambient lights?
- A: Compatibility depends on the specific kit and your vehicle's existing electrical system. Please check the product description and the PDF manual for detailed compatibility information for your exact model and year. Some kits are designed to add ambient lighting functionality even if your car didn't have it originally.
- Q: Can I upgrade my 2016 Mercedes GLC X253 with 3 standard colors to 64 colors?
- A: Yes, it is often possible to upgrade from a 3-color system to a 64-color system with the appropriate kit. Please ensure you select the correct kit variant for your vehicle's year and existing setup. Consult the seller or the PDF manual for specific upgrade options and requirements.
- Q: Does this product work with a Sprinter W907?
- A: This product is specifically designed for Mercedes Benz W205 C-Class, GLC X253, W213 E-Class, and W222 S-Class. Compatibility with a Sprinter W907 is not guaranteed and is unlikely. Please verify with the seller if you have a different vehicle model.