Xiaomi MDY-14-EW

Contents

Xiaomi 50W Pro Wireless Charging Vertical Air-cooled Fast Charging Qi Stand User Manual

Model: MDY-14-EW

1. Introduction

The Xiaomi 50W Pro Wireless Charging Vertical Air-cooled Fast Charging Qi Stand is designed to provide efficient and convenient wireless charging for compatible mobile devices. Featuring a vertical design and air-cooling, it supports fast charging up to 50W for select Xiaomi devices and is Qi-compatible for other wireless charging enabled smartphones.

Xiaomi 50W Pro Wireless Charging Stand, front view
Figure 1: Front view of the Xiaomi 50W Pro Wireless Charging Stand.

2. Safety Instructions

This product meets the technical specifications of short-range low-power Class A devices and complies with relevant regulatory requirements. Please read and adhere to the following safety guidelines:

  • Do not disassemble the equipment or change its internal structure, antenna, etc., to avoid danger.
  • In areas where wireless device use is prohibited (e.g., aircraft, medical facilities), comply with regulations and stop using or turn off the device.
  • Low-power devices in electromagnetic environment protection areas must comply with electromagnetic environment protection and industry regulatory authorities.
  • Radio waves from the device may affect implantable medical devices (e.g., pacemakers, cochlear implants, hearing aids). Maintain at least 30 centimeters distance from implanted medical equipment when using.
  • Use the device within a temperature range of 0°C - 35°C. Avoid high temperatures or humid environments to prevent equipment failure.
  • It is recommended to use a Xiaomi 67W or Xiaomi 120W charger with a standard data cable. If replacing the charger, ensure its output matches device specifications and meets relevant standards.
  • Do not expose the device to high temperatures or heating sources like heaters, microwaves, or ovens.
  • Dispose of equipment according to local regulations; do not treat as household waste. Support recycling actions.
  • Do not drop, squeeze, or puncture the device.
  • This device and its accessories may contain small parts. Keep them out of reach of children to prevent accidental damage, scratching, or swallowing hazards.
  • Do not charge wireless charging devices that do not meet Qi standards. Do not use unauthorized or incompatible power adapters, chargers, or batteries, as this may cause fire or other hazards.

3. Setup

To set up your Xiaomi 50W Pro Wireless Charging Stand, follow these steps:

  1. Connect a compatible power adapter (Xiaomi 67W or 120W recommended) to the USB Type-C interface on the back of the wireless charger.
  2. Plug the power adapter into a wall outlet.
  3. Upon correct connection, the LED indicator light will flash green three times and then turn off, indicating standby mode.
Diagram of the wireless charger showing LED indicator light states and USB Type-C interface
Figure 2: Wireless Charger Diagram with LED Indicator and USB Type-C Port.

LED Indicator Light Status:

  • Power on: Flashes green three times.
  • Standby: OFF
  • Power transmission: Always on (green).
  • Protection: Flashing (green).
  • Error message: Flashing (green).

4. Operating Instructions

4.1. Using Wireless Charging

Once the charger is in standby mode:

  1. Place your Qi-compatible mobile device on the wireless charger.
  2. Center the mobile device left and right to achieve the best charging effect.
  3. The green light of the indicator will remain on during power transmission. If the light flashes, it indicates incompatibility or an abnormal situation.
  4. Check the charging icon on your mobile device screen to confirm charging status.
  5. If abnormal charging occurs, check your phone's status and reposition it on the charger.
Smartphone charging vertically on the Xiaomi 50W Pro Wireless Charging Stand, displaying 85.36% charge and 50W MAX
Figure 3: Smartphone charging on the wireless stand.

4.2. Using Fast Wireless Charging

To utilize the fast wireless charging function:

  • Place a Xiaomi phone that supports fast wireless charging on the wireless charger.
  • For full performance, use a Xiaomi 67W or Xiaomi 120W charger and corresponding data cable.
  • Compatible models for 50W wireless charging include Xiaomi 13 Pro, Xiaomi 12S Ultra, Xiaomi 10 Ultimate Commemorative Edition, Xiaomi 11, Xiaomi 11 Pro, Xiaomi 11 Ultra, Xiaomi MIX 4, Xiaomi 12, Xiaomi 12 Pro, Xiaomi 12S, Xiaomi 12S Pro, and Xiaomi 13.

Important Considerations:

  • Always place the mobile device vertically in the center of the wireless charger. Incorrect placement may prevent proper charging.
  • Thick protective cases or cases containing metallic substances may cause the charger to malfunction or the phone to overheat. Remove thick cases (over 3mm) before charging.
  • Do not charge with bus cards, bank cards, or other chip cards between the phone and charger, as this may interfere with wireless charging.
  • When charging specific Xiaomi phones (e.g., Xiaomi 12S Ultra, Xiaomi 10 Ultimate Commemorative Edition), install the dedicated bracket included in the packaging first. Incorrect bracket installation may result in slow or disconnected charging.
  • Once the mobile device is fully charged, remove it from the wireless charger.
Diagram illustrating the special bracket usage for Xiaomi 12S Ultra and Xiaomi 10 Ultimate Commemorative Edition
Figure 4: Special bracket usage diagram for Xiaomi 12S Ultra and Xiaomi 10 Ultimate Commemorative Edition.

For a complete list of compatible models and bracket usage, please refer to the official user manual PDF: View User Manual (PDF).

5. Maintenance

  • Keep the charging stand clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to liquids or excessive moisture.
  • Store the charger in a cool, dry place when not in use.

6. Troubleshooting

Problem Possible Cause / Solution
Device not charging or charging slowly.
  • Ensure the mobile device is Qi-compatible and placed correctly in the center of the charging stand.
  • Check if the power adapter is properly connected and is a compatible Xiaomi 67W or 120W charger.
  • Remove any thick protective cases (over 3mm) or cases with metallic substances.
  • If using a special bracket for certain Xiaomi models, ensure it is installed correctly.
  • The phone may be fully charged; remove it from the charger.
LED indicator light flashes.
  • Indicates incompatibility or an abnormal situation. Reposition the phone or check for foreign objects.
  • Could indicate a protection mode is active.
Charger makes noise during operation.
  • Some users report minor operational noise. This is generally normal for air-cooled chargers. If the noise is excessive or unusual, discontinue use and contact support.
Phone or charger overheating.
  • Ensure the phone is centered correctly.
  • Remove thick or metallic cases.
  • Avoid charging in high-temperature environments.
  • If overheating persists, discontinue use.

7. Specifications

Feature Detail
Model MDY-14-EW
Brand Name XIAOMI
Connection Wireless
Input 5-20V=4.5A Max
Output 50W Max
Dimensions (L x W x H) 14 cm x 13 cm x 9 cm (approximate package dimensions)
Weight 0.217 kg (approximate package weight)
Cooling Air-cooled
Origin Mainland China
Bottom view of the Xiaomi 50W Pro Wireless Charging Stand, showing model number MDY-14-EW, input/output specifications, and regulatory marks
Figure 5: Bottom label with product specifications.

8. User Tips

  • For optimal 50W fast charging, use a Xiaomi 90W or 120W power adapter. The charger may not function with lower wattage or non-original adapters.
  • While fast charging is efficient, consider using a slower charging method overnight if battery longevity is a primary concern, as some users note less battery temperature increase with lower power.
  • Be aware that the air-cooling fan may produce some noise during operation, which might be noticeable in quiet environments.
  • Ensure your phone is compatible with 50W wireless charging for maximum speed. The charger is confirmed to work with models like Xiaomi 14T Pro and Xiaomi 13 Ultra.

9. Frequently Asked Questions (FAQ)

Q: Will it charge Xiaomi 15T Pro?
A: Yes, user reports indicate that the Xiaomi 15T Pro charges very quickly at 50W with this stand.
Q: Is it suitable for Xiaomi 13 Ultra?
A: Yes, the Xiaomi 13 Ultra is listed as a compatible model for 50W wireless charging.
Q: My phone often loses signal and stops charging. What should I do?
A: Ensure your phone is perfectly centered on the charging stand. Remove any thick or metallic phone cases. Check if the power adapter is securely connected. If the issue persists, refer to the troubleshooting section or contact support.

10. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xiaomi support website. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.