SNDWAY SW600A, SW800B, SW1000A, SW1000B, SW1500A, SW1500B

Contents

SNDWAY Laser Range Finder User Manual

Models: SW600A, SW800B, SW1000A, SW1000B, SW1500A, SW1500B

1. Product Overview

The SNDWAY Laser Range Finder is a versatile multi-function device designed for precise measurements in various applications, including hunting, golf, and general distance measurement. It integrates speed, distance, angle, height, area, and volume measurement capabilities into a single, compact unit with a touch screen interface.

SNDWAY Laser Range Finder showing various measurement modes
SNDWAY Laser Range Finder displaying distance, speed, height, angle, area, and volume measurement capabilities.
SNDWAY SW-600A Laser Range Finder and included accessories: cloth bag, charging line, lanyard, warranty card, and manual.
Included accessories with the SW-600A model: cloth bag, charging cable, lanyard, warranty card, and user manual.

Product Demonstration Video

A short video demonstrating the operation and various modes of the SNDWAY Laser Range Finder.

2. Device Layout

Familiarize yourself with the components of your laser range finder:

  1. Mode/Unit Button: Used to switch between measurement modes and units.
  2. Laser Emission Aperture: Where the laser beam is emitted.
  3. Laser Receiving Aperture: Where the reflected laser beam is received.
  4. TFT LCD: The main display screen.
  5. Power/Start Button: Turns the device on/off and initiates measurements.
  6. Observation Eyepiece/Inner LCD: For viewing through the device and seeing internal display.
  7. Rotation-type Focusing: Adjusts the focus of the eyepiece.
  8. USB Insert: For charging the device.
  9. Charging Light: Indicates charging status.

3. Display Indicators

Inner LCD Display

The internal LCD provides key information during operation:

  1. Lack of Power: Battery low indicator.
  2. DST Measuring Mode: Indicates distance measurement mode.
  3. Flagpole Locking Mode: Indicates flagpole locking mode.
  4. Target: Indicates the target being measured.
  5. Laser Shooting: Indicates the laser is active.
  6. Angle: Displays the measured angle.
  7. SPD Speed Mode: Indicates speed measurement mode.
  8. Distance of Straight Line: Displays the direct distance.
  9. Unit of Speed/Distance: Shows the current unit (e.g., km/h, m, Y).
  10. Vertical Height: Displays calculated vertical height.
  11. Horizontal Distance: Displays calculated horizontal distance.

Touch Screen Interface

The touch screen provides an intuitive way to interact with the device:

  1. Mode Button: Switches between main measurement modes.
  2. Back Button: Returns to the previous screen or setting.
  3. Angle Display: Shows the current angle.
  4. Measuring Mode Indicator: Displays the active measurement mode.
  5. Scanning Indicator: Shows when scanning is active.
  6. Power Indicator: Displays battery level.
  7. Main Display Area: Shows the primary measurement result.
  8. Sub Display Area: Shows secondary measurement results (e.g., height, horizontal distance).

NOTE: Touching the surrounding area of the Mode button when trying to tap it may invalidate the key press.

4. Operation Instructions

4.1. Power On/Off

  • To Power On: Press the Power/Start button for 2 seconds.
  • To Power Off: The device will automatically power off after 2 seconds of inactivity.

4.2. Mode Switching

  • Press the Mode/Unit button to switch between Distance, Speed, and Flagpole modes.
  • Tap the Mode icon on the touch screen to switch between Distance, Speed, Flagpole, Area, and Volume modes.

NOTE: When Area/Volume mode is selected on the touch screen, the internal LCD will still display in Distance mode.

4.3. Unit Switching

  • Long press the Mode/Unit button to switch the measurement unit between meters (m) and yards (Y).

4.4. Measurement

  • Single Measure: Short press the Power/Start button to initiate a single measurement.
  • Distance Scanning: Press and hold the Power/Start button to start continuous distance scanning.

4.5. Memory and Record

The device can automatically save and calculate results for up to 30 items.

  • Check Records: Tap and hold the Back button on the touch screen for over 3 seconds.
  • Browse Records: Press the Mode/Unit button or the Power/Start button to scroll through saved records.
  • Clear All Records: Long press the Mode/Unit button to clear all stored data.

5. Advanced Functions

5.1. Distance Mode

This is the default mode. It measures the straight-line distance to a target and can also calculate vertical height and horizontal distance based on the angle.

Diagram showing distance measurement with angle, height, and horizontal distance calculations.
Example of distance measurement, including angle, vertical height, and horizontal distance calculations.

5.2. Speed Mode

Measures the speed of a moving target.

  • Press the Mode/Unit button or tap the Mode icon on the touch screen until 'SPD' is displayed.
  • Press and hold the Power/Start button while tracking the target. The speed will update every 1 second.

5.3. Flagpole Locking

This function helps to accurately measure the distance to a flagpole, ignoring background objects.

Diagram illustrating flagpole locking function, showing the rangefinder measuring to a flagpole.
Illustration of the flagpole locking feature, designed for golf and similar applications.
  • Press the Mode/Unit button or tap the Mode icon on the touch screen to switch to Flagpole mode.
  • Focus the rangefinder on the flagpole.
  • Short press the Power/Start button, then slowly scan around the pole. The distance to the flagpole will be locked and confirmed in approximately 1.5 seconds, indicated by a twinkling icon on the display.

NOTE: For best results, use this function when there are no obstacles in the surroundings. Move the rangefinder slowly and smoothly to obtain accurate results.

5.4. Area Measurement

Calculates the area based on length and width measurements.

  • Tap the Mode icon on the touch screen 3 times to switch to Area mode.
  • Follow the on-screen instructions (images on the side LCD) to measure the length and width. The device will calculate the area.
  • Tap the Back button to return to distance mode on the side LCD.

5.5. Volume Measurement

Calculates the volume based on length, width, and height measurements.

  • Tap the Mode icon on the touch screen 4 times to switch to Volume mode.
  • Follow the on-screen instructions (images on the side LCD) to measure the length, width, and height. The device will calculate the volume.
  • Tap the Back button to return to distance mode on the side LCD.

6. Power & Charging

6.1. Battery Status

Both the internal LCD and the side LCD will show a low power indicator when the battery is running low.

6.2. Charging

  • Connect the device to a power source using the provided USB cable.
  • The charging light will be red during charging and turn green when fully charged.
  • A full charge typically takes about 3 hours.

NOTE: The device may not start if the battery level is too low.

7. Maintenance

7.1. Storage

  • Do not store the meter in high temperature or high humidity environments for extended periods.
  • If not used frequently, remove the battery (if removable) and store the meter in its allocated pouch in a cool, dry place.

7.2. Cleaning

  • Keep the device surface clean. Use a wet soft cloth to clean dust.
  • Never use corrosive liquids for cleaning.
  • The laser output window and its focus lens should be maintained according to standard optical device cleaning procedures.

8. Troubleshooting

8.1. Device Reset

  • If an unexpected error occurs, press the Power/Start button and the Mode/Unit button simultaneously for more than 15 seconds to reset the device.

8.2. General Troubleshooting Tips

  • No Power: Ensure the battery is charged. The device may not start under low power.
  • Inaccurate Readings: Check environmental conditions (see Important Notes). Ensure the target is suitable for measurement. Clean the laser emission and receiving apertures.
  • Display Issues: Try resetting the device. Ensure the eyepiece is properly focused.

9. Specifications

FeatureSpecification
Measuring Range800m / 1000m / 1500m (depending on model)
Speed Measure Range0~300 Km/h
Distance Measure Accuracy±(1.0m+D*0.2%)
Water ResistantIP54
Height MeasurementYes
Scan Distance MeasureYes
Pole LockingYes
Automatic Storage30 units (B series only)
Angle Range±90°
Angle Tolerance±1°
Magnification(6.0±5%)X
Objective Caliber23.7mm
Eyepiece Caliber15.0mm
Exit Pupil Caliber3.7mm
Field of View6.0°±10%
Diopter Adjustable Range±6°
UnitM / Y
Battery750mAh Li-ion
Battery LifeCharge-discharge 800 times
Power Consumption1.2 W
Dimensions104 x 76.5 x 41 mm

10. Important Notes for Accuracy

To ensure optimal accuracy, use the device in the following environments:

  • Sunny Day
  • Clear Air
  • Bright Target
  • High Reflecting Surface

The following situations may cause measurement problems:

  • Black Target
  • Glass
  • Snowy, Rainy, or Foggy conditions
  • Dynamic Target
  • Diffuse Surface
  • Very Strong Light or Sunshine
  • Tiny Target

Laser Information

The multifunctional range finder uses a non-destructive vision infrared pulse laser. It does not emit a visible beam. The device measures each pulse from the target and back, using an advanced diagnostic circuit to instantly calculate the measured distance.

The maximum measuring range of the device is influenced by the target's reflectivity, color, surface finish, size, and actual shape.

11. What's in the Box

Please check the contents of your package against the list below:

No.ItemUnitQuantity
1Meter (Laser Range Finder)PC1
2PouchPC1
3Hand StrapPC1
4USB CablePC1
5User ManualPC1
6Gift boxPC1

12. User Tips

  • For golf, always use the flagpole locking feature to ensure you're measuring to the flag and not background trees.
  • When measuring speed, try to keep the target moving perpendicular to your line of sight for more accurate readings.
  • Regularly clean the lenses with a soft, lint-free cloth to maintain clear vision and accurate laser performance.
  • Keep the device charged, especially before extended use, as low battery can affect performance and prevent startup.

13. Warranty and Support

This product is covered by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or contact the seller directly.

For technical support or service inquiries, please reach out to the vendor or the official SNDWAY customer service channels.

A digital version of this user manual is available for download: User Manual (PDF)

© 2023 SNDWAY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.