1. Introduction
Thank you for choosing Pampsee Super Bright LED Headlight and Fog Light Bulbs. These bulbs are designed to provide superior illumination for your vehicle, enhancing visibility and safety. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your LED bulbs.
These bulbs are available for various socket types including H7, H8, H9, H11, 9005 (HB3), 9006 (HB4), and 5202. They feature a green lemon color temperature, 8000 lumens brightness, and IP68 waterproof rating.
2. Specifications
| Feature | Detail |
|---|---|
| Condition | 100% Brand New |
| Socket Types | H7, H8, H9, H11, 9005 (HB3), 9006 (HB4), 5202 |
| Lumen | 8000Lm |
| Color Temperature | Green Lemon |
| Waterproof Level | IP68 |
| Work Voltage | 9-24V DC |
| Material | Aluminum |
| Viewing Angle | 360 degree |
| Placement on Vehicle | Left, Right, Front |
| Usage | Fog Light |
| Lifespan | More than 50,000 hours |
Package Contents:
- 2 pcs/set LED Fog Car Lights Bulbs
Package Dimensions:
- Length: 11 cm
- Width: 8 cm
- Height: 5 cm
- Weight: 0.08 kg
3. Safety Precautions
- When installing H1/H3/880/881 models, exercise caution to prevent abrasion of the chips.
- For split structure products, avoid frequent up and down movement to maintain the elasticity of the chips.
- In dusty environments, regular cleaning is essential for prolonged use.
- If used for extended periods, regularly clean the fan to ensure proper heat dissipation.
- Do not touch the lamp beads directly with hands or hard objects during installation to prevent damage.
4. Installation Guide
The Pampsee LED bulbs are designed for easy, 1:1 plug-and-play installation, typically taking only 5 minutes.
General Installation Steps:
The following diagrams illustrate the general installation process. Specific steps may vary slightly depending on your vehicle's make and model.
- Identify the correct socket type for your vehicle.
- Remove the existing headlight or fog light bulb.
- Insert the new LED bulb into the housing.
- Secure the bulb by twisting or locking it into place.
- Connect the power connector to the LED bulb.
- Test the lights to ensure proper function.
Adjusting Light Angle:
Depending on your car's assembly, you may need to rotate the socket and fixed metal parts to adjust the light angle for optimal beam pattern. This ensures a perfect effect without dark areas or glare.
5. Operation
Superior Illumination:
These LED bulbs provide 8000 lumens of super bright green lemon light, significantly outperforming traditional halogen bulbs and other LED lights, ensuring a clear view of the road.
Perfect Beam Pattern:
The bulbs are engineered to produce a perfect beam pattern with no dark areas and no glare, providing both far and near light for comprehensive road coverage.
All-Weather Performance:
With an IP68 waterproof rating and an operating temperature range of -40°C to 150°C, these bulbs are designed to work normally in all types of weather and extreme conditions, including rain, snow, fog, and dust.
6. Maintenance
Cleaning:
- If operating in dusty environments for extended periods, ensure regular cleaning of the bulb and its housing.
- For models with a cooling fan, regular cleaning of the fan is necessary to maintain efficient heat dissipation and product longevity.
Cooling System:
The bulbs feature an efficient, fanless cooling system with intelligent temperature control, utilizing aviation aluminum for high thermal conductivity and copper heat conduction. This design ensures a longer lifespan of over 50,000 hours.
The long lifespan of these LED bulbs means you can say goodbye to frequent bulb replacements, offering a perfect balance between performance and longevity compared to traditional halogen bulbs.
7. Troubleshooting
- Fan Running at High Speed: The fan circuit is designed for independent temperature control. If the environmental or bulb body temperature exceeds 75°C, the fan will operate at high speed to cool down the bulb. This is normal operation.
- Regular Flashing: If the product flashes regularly, it indicates that the internal assembly temperature is too high (above 90°C) or there is abnormal engine heat. Check for proper installation and ventilation.
- Compatibility: These bulbs are suitable for 99% of vehicles and are designed to prevent warnings, polarity issues, and radio interference. If you experience any of these, double-check the installation and ensure the correct socket type was chosen.
8. User Tips
- Always ensure the correct socket type is selected for your vehicle's specific headlight or fog light application to guarantee proper fit and function.
- Before finalizing installation, perform a quick test of the lights to confirm they are working correctly and the beam pattern is optimal.
- For vehicles with complex electrical systems, consult your vehicle's manual or a professional if you encounter any unexpected issues after installation.
9. Warranty and Support
Warranty Information:
Pampsee provides a 12-month warranty for all items from the date of purchase, provided the product is used appropriately and without unauthorized overhaul. If a problem identified by a service technician belongs to our company's responsibility, warranty service will be provided.
For international customers, warranty service can be obtained by sending a video demonstrating the product's issues. Please keep the serial number clear and complete during this process.
Note: No warranty is offered if there is any feedback less than 5 stars before communication with support.
A PDF version of the user manual and guides is available for download: User manual (PDF)
Customer Support:
If you have any questions or require assistance, please do not hesitate to contact us. We are committed to helping you resolve any issues.
Please email us before opening a dispute or leaving negative feedback. We will assist you in resolving all problems.