1. Product Overview
The Ultra-thin Motion Sensor LED Night Light is a versatile, wireless, and USB rechargeable lighting solution designed for various indoor applications. It features motion sensing capabilities, multiple light color options, and adjustable brightness, making it ideal for closets, kitchens, staircases, and bedrooms.

Figure 1: Ultra-thin LED Under Cabinet Light
Video 1: Product demonstration showing motion sensing, installation, charging, and light modes.
2. Setup and Installation
The LED Night Light features a simple magnetic installation method, requiring no wiring.
Installation Steps:
- Clean the desired installation surface thoroughly and ensure it is dry.
- Locate the built-in magnet on the back of the light. Place the provided iron sheet onto the back of the light, aligning it with the magnet.
- Peel off the adhesive backing from the iron sheet and firmly stick it to your chosen installation position (e.g., under a cabinet, inside a closet).
- Once the iron sheet is securely attached, the light can be magnetically attached to it. This allows for easy removal for charging or repositioning.

Figure 2: Motion sensor detection range (3 meters, 120 degrees) and light thickness (1.15 cm).

Figure 3: Examples of applicable scenarios for the LED light.
3. Operating Instructions
The light features multiple operating modes and adjustable settings.
Function Buttons:

Figure 4: Control buttons for mode selection and brightness/color adjustment.
- Short Press (Mode Selection):
- First press: Constant Light Mode (Always bright)
- Second press: Night Mode (Night induction - light activates only in darkness when motion is detected)
- Third press: All-Day Mode (All day induction - light activates in any lighting condition when motion is detected)
- Fourth press: Off
- Short Press (Color Cycle): While the light is on, a short press on the dedicated color button will cycle between White Light, Yellow Light (Warm), and Natural Light.
- Long Press (Brightness Adjustment): While the light is on, a long press on the dedicated brightness button will adjust the light intensity.
Motion Sensing:
- Detection Distance: 3 to 5 meters.
- Detection Angle: 120 degrees.
- Auto-Off: The light will turn off automatically approximately 25 seconds after no motion is detected.
- Day/Night Sensor: In Night Mode, the light will not activate during the day or in well-lit environments. It will only turn on in dark conditions when motion is detected.

Figure 5: Motion sensing capabilities and auto-off feature.

Figure 6: The light activates only in dark conditions when motion is detected (Night Mode).

Figure 7: The light offers Natural, Warm, and White light color options.
4. Maintenance and Charging
Charging:
The LED Night Light is equipped with a built-in rechargeable polymer lithium battery. When the battery is low, connect the provided USB cable to the light's charging port and to a USB power source (e.g., power bank, USB adapter, computer USB port). The charging indicator will show the charging status.
- Battery Capacity: 300mAh (for 10cm models), 500mAh (for larger models).
- Usage Time: A full charge can last approximately 30-50 days, depending on usage frequency.

Figure 8: 10cm model specifications including 300mAh battery and USB charging.

Figure 9: Larger models feature a 500mAh lithium battery for extended use.
Cleaning:
To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
5. Troubleshooting
- Light not turning on: Ensure the light is charged. Check the selected mode; if in Night Mode, ensure the environment is dark enough for activation.
- Motion sensor not working: Ensure the sensor is not obstructed. Check the detection range and angle.
- Light flickering: This may indicate a low battery. Recharge the device.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | 82 |
| Luminous Flux | <60 lumens |
| Nominal Voltage | 3.7 V |
| Voltage | 3.7 V |
| Light Source | LED bulbs |
| Bulbs Included | Yes |
| Certification | CCC, CE |
| Power Generation | Motion |
| Type | Night Light |
| Origin | Mainland China |
| Wattage | 0-5W |
| Item Type | Night Lights |
| Batteries Required | No |
| Batteries Included | Yes |
| Smart Device | No |
| Use | Emergency |
| Thickness | 1.15 cm |
| Battery Capacity | 300mAh (10cm models), 500mAh (larger models) |

Figure 10: Internal components including PC light cover, circuit board, and aluminum alloy housing.
7. User Tips
- For optimal motion detection, ensure the sensor is not covered or obstructed.
- To maximize battery life, use the Night Mode setting in areas where light is only needed in darkness.
- The magnetic attachment allows for easy removal, making it convenient to charge the light without detaching the adhesive base.
8. Warranty and Support
For warranty information, returns, or technical support, please contact your original seller or refer to the product's purchase documentation. Keep your proof of purchase for any warranty claims.