liitokala Lii-M4S / Lii-M4

Contents

LiitoKala Lii-M4S & Lii-M4 Smart Battery Charger User Manual

Model: Lii-M4S / Lii-M4 | Brand: LiitoKala

1. Safety Information

⚠ WARNING: Potential Fire Risk!

  • Always follow the instruction manual strictly for charging and storage.
  • Do not disassemble, modify, or short-circuit the charger or batteries.
  • Use only compatible batteries and power adapters.
  • Ensure adequate ventilation during charging to prevent overheating.
  • Keep the charger and batteries away from water, moisture, direct sunlight, and high temperatures.
  • Do not charge damaged or leaking batteries.
  • Keep out of reach of children.

2. What's in the Box

  • 1x LiitoKala Lii-M4S or Lii-M4 Smart Battery Charger Unit
  • 1x USB Type-C Charging Cable
  • 1x User Manual (this document)

Note: A wall power adapter (charger head) is typically not included and must be supplied by the user (recommended 5V/2A).

3. Product Overview & Features

The LiitoKala Lii-M4S/M4 is an intelligent multi-functional battery charger designed for a wide range of rechargeable batteries. It offers advanced features for optimal battery management and safety.

Video: Overview of the LiitoKala Lii-M4S Smart Charger in operation.

Key Features:

  • Wide Compatibility: Supports Li-ion (26650, 21700, 18650, 17670, 18490, 17500, 17355, 16340, 14500, 14650, 10440) and Ni-MH/Cd (AA, AAA, SC, C) batteries.
  • Intelligent Capacity Detection: Accurately measures battery capacity and health.
  • Multi-Mode Operation: Offers Charge, Discharge, Test, and Storage modes.
  • LCD Display: Real-time display of voltage (V), current (mA), time (h), capacity (mAh), and internal resistance (mR).
  • Independent Channels: Four independent charging slots allow simultaneous charging of different battery types and sizes.
  • USB Type-C Input: Convenient and modern input interface (5V/2A).
  • USB Output (Lii-M4 only): Can function as a power bank with 5V/1A output (Ni-MH batteries are not valid for USB output).
  • Six Protection Functions: Overcharge, Overdischarge, Overvoltage, Overcurrent, Short Circuit, and Temperature protection.
  • Battery Activation: Can activate deeply discharged batteries.
LiitoKala Lii-M4S Main Features

Image: LiitoKala Lii-M4S showing main features, dimensions, and input/output.

LiitoKala Lii-M4S Protection Functions

Image: LiitoKala Lii-M4S highlighting protection functions and LCD display information.

4. Setup Instructions

  1. Connect Power: Insert the USB Type-C cable into the charger's input port (IN: 5V/2A) and connect the other end to a suitable USB power adapter (e.g., a phone charger, computer USB port, or power bank). A 5V/2A adapter is recommended for optimal performance.
  2. Insert Batteries: Carefully insert rechargeable batteries into the charging slots. Ensure correct polarity (+ and - ends match the markings on the charger). The charger will automatically detect the battery type (Li-ion or Ni-MH/Cd) and begin charging in default mode.
  3. Initial Display: Upon inserting a battery, the LCD screen will light up and display initial battery information.

5. Operating Instructions

5.1 Key Description:

LiitoKala Lii-M4S Key Description

Image: Description of the MODE, 1-2, 3-4, and CURRENT buttons on the Lii-M4S.

  • MODE Button: Lightly press within 8 seconds of placing a battery to switch between Charge, Discharge, Capacity Detection (Test), and Battery Storage modes. Long press to unlock if a function is locked.
  • CURRENT Button: Tap to switch the charging/discharge current. Long press to keep the screen always on/off.
  • 1-2 / 3-4 Buttons: Tap to view battery parameters for the corresponding slots (1-2 or 3-4).

5.2 Operating Modes:

The charger offers four main operating modes:

  1. Charge Mode:
    • Default mode when batteries are inserted.
    • Automatically charges the battery and stops when full.
    • Tap the CURRENT button to select charging current (e.g., 300mA, 500mA, 700mA, 1000mA).
    LiitoKala Charge Mode

    Image: Illustration of Charge Mode for NiMH and Lithium batteries.

  2. Discharge Mode:
    • Discharges the battery to a safe voltage level.
    • The system records data during discharge, allowing for battery discharge capacity detection.
    • Select Discharge mode using the MODE button.
    LiitoKala Discharge Mode

    Image: Illustration of Discharge Mode operation.

  3. Test Mode (Capacity Detection):
    • Used to test the true capacity of your battery.
    • The system first charges the battery, then discharges it, and finally recharges it. The actual battery capacity is displayed at the end of the cycle.
    • Select Test mode using the MODE button.
    LiitoKala Test Mode

    Image: LiitoKala Lii-M4 in Test Mode, used to determine true battery capacity.

  4. Storage Mode:
    • Designed to store Lithium batteries at an optimal voltage (typically around 3.7V) for long-term preservation.
    • If the battery voltage is above 3.7V, it will discharge; if below 3.7V, it will charge until 3.7V is reached.
    • Select Storage mode using the MODE button.
    LiitoKala Test and Storage Mode Descriptions

    Image: Detailed descriptions of Test and Storage modes.

5.3 USB Output Function (Lii-M4 only):

The LiitoKala Lii-M4 model features a 5V/1A USB output port, allowing it to function as a power bank to charge mobile devices. This function is available when a charged Lithium-ion battery is in the 4th slot.

LiitoKala Lii-M4 Power Bank Function

Image: LiitoKala Lii-M4 demonstrating its multifunctionality as a power bank.

6. Maintenance and Care

  • Cleaning: Use a soft, dry cloth to clean the charger. Do not use abrasive cleaners or solvents.
  • Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping the charger or subjecting it to strong impacts.
  • Disconnection: Always disconnect the power supply when the charger is not in use.

7. Troubleshooting

ProblemPossible CauseSolution
Charger not powering onNo power supply; faulty cable/adapterCheck USB cable connection; try a different USB adapter/port.
Battery not chargingIncorrect polarity; battery damaged/dead; incompatible batteryCheck battery polarity; try a different battery; ensure battery type is supported.
Charger or battery overheatingPoor ventilation; faulty battery; excessive charging currentEnsure proper ventilation; remove battery if severely hot; use lower charging current if available.
LCD display not showing informationNo battery inserted; power issueInsert a battery; check power connection.
USB output (Lii-M4) not workingNo Li-ion battery in slot 4; battery too low; Ni-MH battery usedEnsure a charged Li-ion battery is in slot 4; check battery level; USB output does not work with Ni-MH batteries.

8. Specifications

FeatureSpecification
Brand Nameliitokala
Model NumberLii-M4S / Lii-M4
Input VoltageUSB (5-20V DC), Type-C 5V/2A (recommended)
Output Voltage (Li-ion)DC 4.20V
Output Voltage (Ni-MH/Cd)DC 1.48V
Charging Current (Li-ion)300mA*4 / 500mA*4 / 700mA*2 / 1000mA*2
Charging Current (Ni-MH/Cd)300mA*4 / 500mA*4 / 700mA*2 / 1000mA*2
Discharge Current250mA*4 / 500mA*4
USB Output (Lii-M4 only)DC 5V 1000mA
Compatible DevicesBattery (Li-ion: 26650, 21700, 18650, etc.; Ni-MH/Cd: AA, AAA, SC, C)
Output Power≤37.5W
Display ScreenYes
Intelligent ChargeYes
Quick ChargeYes
Dimensions (L*W*H)146mm * 100mm * 33mm
WeightApprox. 280g (Lii-M4S), 260g (Lii-M4)
CertificationRoHs, CE, FCC, KC
LiitoKala Lii-M4 Approximate Size

Image: Approximate dimensions of the LiitoKala Lii-M4 charger.

LiitoKala Lii-M4S Product Information Table

Image: Product information table for LiitoKala Lii-M4S, detailing charge types, currents, input, and size.

9. User Tips

  • Screen Always On: To keep the LCD screen continuously lit, long-press the CURRENT button until the screen flashes. Repeat to revert to the default auto-off setting.
  • Capacity Verification: Utilize the 'Test' mode to accurately verify the real capacity (mAh) and health of your batteries, which can help in discarding damaged cells.
  • Charging Speed: Note that the maximum charging current is 1A per slot, and this may be reduced when multiple slots are filled simultaneously.
  • No Audio Alerts: This charger does not feature sound indications for charge completion. Monitor the LCD display for status updates.
  • Power Adapter: While a USB cable is included, ensure you use a reliable 5V/2A USB power adapter for optimal charging performance.

10. Warranty and Support

This LiitoKala product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please contact your original point of purchase or refer to the official LiitoKala website for customer service contact information.

© 2024 LiitoKala. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.